gyro.h

00001 /**
00002   ******************************************************************************
00003   * @file    gyro.h
00004   * @author  MCD Application Team
00005   * @version V4.0.1
00006   * @date    21-July-2015
00007   * @brief   This header file contains the functions prototypes for the gyroscope driver.
00008   ******************************************************************************
00009   * @attention
00010   *
00011   * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
00012   *
00013   * Redistribution and use in source and binary forms, with or without modification,
00014   * are permitted provided that the following conditions are met:
00015   *   1. Redistributions of source code must retain the above copyright notice,
00016   *      this list of conditions and the following disclaimer.
00017   *   2. Redistributions in binary form must reproduce the above copyright notice,
00018   *      this list of conditions and the following disclaimer in the documentation
00019   *      and/or other materials provided with the distribution.
00020   *   3. Neither the name of STMicroelectronics nor the names of its contributors
00021   *      may be used to endorse or promote products derived from this software
00022   *      without specific prior written permission.
00023   *
00024   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
00025   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
00026   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
00027   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
00028   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
00029   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
00030   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
00031   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
00032   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
00033   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
00034   *
00035   ******************************************************************************
00036   */
00037   
00038 
00039 /* Define to prevent recursive inclusion -------------------------------------*/
00040 #ifndef __GYRO_H
00041 #define __GYRO_H
00042 
00043 #ifdef __cplusplus
00044  extern "C" {
00045 #endif
00046 
00047 /* Includes ------------------------------------------------------------------*/
00048 #include <stdint.h>
00049 
00050 /** @addtogroup BSP
00051   * @{
00052   */
00053 
00054 /** @addtogroup Components
00055   * @{
00056   */
00057     
00058 /** @addtogroup GYRO
00059   * @{
00060   */
00061 
00062 /** @defgroup GYRO_Exported_Types
00063   * @{
00064   */
00065 
00066 /** @defgroup GYRO_Driver_structure  Gyroscope Driver structure
00067   * @{
00068   */
00069 typedef struct
00070 {  
00071   void       (*Init)(uint16_t);
00072   void       (*DeInit)(void); 
00073   uint8_t    (*ReadID)(void);
00074   void       (*Reset)(void);
00075   void       (*LowPower)(uint16_t);   
00076   void       (*ConfigIT)(uint16_t); 
00077   void       (*EnableIT)(uint8_t);
00078   void       (*DisableIT)(uint8_t);  
00079   uint8_t    (*ITStatus)(uint16_t, uint16_t);   
00080   void       (*ClearIT)(uint16_t, uint16_t); 
00081   void       (*FilterConfig)(uint8_t);  
00082   void       (*FilterCmd)(uint8_t);  
00083   void       (*GetXYZ)(float *);
00084 }GYRO_DrvTypeDef;
00085 /**
00086   * @}
00087   */
00088 
00089 /** @defgroup GYRO_Config_structure  Gyroscope Configuration structure
00090   * @{
00091   */
00092 
00093 typedef struct
00094 {
00095   uint8_t Power_Mode;                         /* Power-down/Sleep/Normal Mode */
00096   uint8_t Output_DataRate;                    /* OUT data rate */
00097   uint8_t Axes_Enable;                        /* Axes enable */
00098   uint8_t Band_Width;                         /* Bandwidth selection */
00099   uint8_t BlockData_Update;                   /* Block Data Update */
00100   uint8_t Endianness;                         /* Endian Data selection */
00101   uint8_t Full_Scale;                         /* Full Scale selection */
00102 }GYRO_InitTypeDef;
00103 
00104 /* GYRO High Pass Filter struct */
00105 typedef struct
00106 {
00107   uint8_t HighPassFilter_Mode_Selection;      /* Internal filter mode */
00108   uint8_t HighPassFilter_CutOff_Frequency;    /* High pass filter cut-off frequency */
00109 }GYRO_FilterConfigTypeDef;
00110 
00111 /*GYRO Interrupt struct */
00112 typedef struct
00113 {
00114   uint8_t Latch_Request;                      /* Latch interrupt request into CLICK_SRC register */
00115   uint8_t Interrupt_Axes;                     /* X, Y, Z Axes Interrupts */ 
00116   uint8_t Interrupt_ActiveEdge;               /* Interrupt Active edge */
00117 }GYRO_InterruptConfigTypeDef;  
00118 
00119 /**
00120   * @}
00121   */
00122 
00123 /**
00124   * @}
00125   */
00126 
00127 /**
00128   * @}
00129   */
00130 
00131 /**
00132   * @}
00133   */
00134 
00135 /**
00136   * @}
00137   */
00138 
00139 #ifdef __cplusplus
00140 }
00141 #endif
00142 
00143 #endif /* __GYRO_H */
00144 
00145 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/