Diff: Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01.h

Revision:

4:137bb367ba50

Child:

5:0c70bc6d2dc0

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Drivers/BSP/B-L475E-IOT01/stm32l475e_iot01.h	Fri Apr 14 13:09:54 2017 +0200
@@ -0,0 +1,266 @@
+/**
+  ******************************************************************************
+  * @file    stm32l475e_iot01.h
+  * @author  MCD Application Team
+  * @version V1.0.0
+  * @date    17-March-2017
+  * @brief   STM32L475E IOT01 board support package
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics International N.V.
+  * All rights reserved.</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without
+  * modification, are permitted, provided that the following conditions are met:
+  *
+  * 1. Redistribution of source code must retain the above copyright notice,
+  *    this list of conditions and the following disclaimer.
+  * 2. Redistributions in binary form must reproduce the above copyright notice,
+  *    this list of conditions and the following disclaimer in the documentation
+  *    and/or other materials provided with the distribution.
+  * 3. Neither the name of STMicroelectronics nor the names of other
+  *    contributors to this software may be used to endorse or promote products
+  *    derived from this software without specific written permission.
+  * 4. This software, including modifications and/or derivative works of this
+  *    software, must execute solely and exclusively on microcontroller or
+  *    microprocessor devices manufactured by or for STMicroelectronics.
+  * 5. Redistribution and use of this software other than as permitted under
+  *    this license is void and will automatically terminate your rights under
+  *    this license.
+  *
+  * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
+  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
+  * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
+  * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
+  * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+  * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+  * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L475E_IOT01_H
+#define __STM32L475E_IOT01_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal.h"
+
+/** @addtogroup BSP
+  * @{
+  */
+
+/** @addtogroup STM32L475E_IOT01
+  * @{
+  */
+      
+/** @addtogroup STM32L475E_IOT01_LOW_LEVEL
+  * @{
+  */ 
+
+/** @defgroup STM32L475E_IOT01_LOW_LEVEL_Exported_Types LOW LEVEL Exported Types
+  * @{
+  */
+typedef enum 
+{
+DISCO_LED2 = 0,
+DISCO_LED_GREEN = DISCO_LED2,
+}Led_TypeDef;
+
+
+typedef enum 
+{  
+  BUTTON_USER = 0
+}Button_TypeDef;
+
+typedef enum 
+{  
+  BUTTON_MODE_GPIO = 0,
+  BUTTON_MODE_EXTI = 1
+}ButtonMode_TypeDef;
+
+typedef enum 
+{
+  COM1 = 0,
+  COM2 = 0,
+}COM_TypeDef;
+/**
+  * @}
+  */ 
+
+/** @defgroup STM32L475E_IOT01_LOW_LEVEL_Exported_Constants LOW LEVEL Exported Constants
+  * @{
+  */ 
+
+/** 
+  * @brief  Define for STM32L475E_IOT01 board
+  */ 
+#if !defined (USE_STM32L475E_IOT01)
+ #define USE_STM32L475E_IOT01
+#endif
+
+#define LEDn                             ((uint8_t)1)
+
+#define LED2_PIN                         GPIO_PIN_14
+#define LED2_GPIO_PORT                   GPIOB
+#define LED2_GPIO_CLK_ENABLE()           __HAL_RCC_GPIOB_CLK_ENABLE()
+#define LED2_GPIO_CLK_DISABLE()          __HAL_RCC_GPIOB_CLK_DISABLE()
+
+
+
+#define LEDx_GPIO_CLK_ENABLE(__INDEX__)  do{if((__INDEX__) == 0) LED2_GPIO_CLK_ENABLE();}while(0)
+
+#define LEDx_GPIO_CLK_DISABLE(__INDEX__)  do{if((__INDEX__) == 0) LED2_GPIO_CLK_DISABLE();}while(0)
+
+/* Only one User/Wakeup button */
+#define BUTTONn                             ((uint8_t)1)
+
+/**
+  * @brief Wakeup push-button
+  */
+#define USER_BUTTON_PIN                   GPIO_PIN_13
+#define USER_BUTTON_GPIO_PORT             GPIOC
+#define USER_BUTTON_GPIO_CLK_ENABLE()     __HAL_RCC_GPIOC_CLK_ENABLE()
+#define USER_BUTTON_GPIO_CLK_DISABLE()    __HAL_RCC_GPIOC_CLK_DISABLE()
+#define USER_BUTTON_EXTI_IRQn             EXTI15_10_IRQn
+
+
+
+#define COMn                              ((uint8_t)1)
+
+/**
+ * @brief Definition for COM port1, connected to USART1
+ */ 
+#define DISCOVERY_COM1                          USART1
+#define DISCOVERY_COM1_CLK_ENABLE()             __HAL_RCC_USART1_CLK_ENABLE()
+#define DISCOVERY_COM1_CLK_DISABLE()            __HAL_RCC_USART1_CLK_DISABLE()
+
+#define DISCOVERY_COM1_TX_PIN                   GPIO_PIN_6
+#define DISCOVERY_COM1_TX_GPIO_PORT             GPIOB
+#define DISCOVERY_COM1_TX_GPIO_CLK_ENABLE()     __HAL_RCC_GPIOB_CLK_ENABLE()   
+#define DISCOVERY_COM1_TX_GPIO_CLK_DISABLE()    __HAL_RCC_GPIOB_CLK_DISABLE()  
+#define DISCOVERY_COM1_TX_AF                    GPIO_AF7_USART1
+
+#define DISCOVERY_COM1_RX_PIN                   GPIO_PIN_7
+#define DISCOVERY_COM1_RX_GPIO_PORT             GPIOB
+#define DISCOVERY_COM1_RX_GPIO_CLK_ENABLE()     __HAL_RCC_GPIOB_CLK_ENABLE()   
+#define DISCOVERY_COM1_RX_GPIO_CLK_DISABLE()    __HAL_RCC_GPIOB_CLK_DISABLE()  
+#define DISCOVERY_COM1_RX_AF                    GPIO_AF7_USART1
+
+#define DISCOVERY_COM1_IRQn                     USART1_IRQn
+                                              
+
+#define DISCOVERY_COMx_CLK_ENABLE(__INDEX__)            do { if((__INDEX__) == COM1) {DISCOVERY_COM1_CLK_ENABLE();}} while(0)
+#define DISCOVERY_COMx_CLK_DISABLE(__INDEX__)           do { if((__INDEX__) == COM1) {DISCOVERY_COM1_CLK_DISABLE();}} while(0)
+
+#define DISCOVERY_COMx_TX_GPIO_CLK_ENABLE(__INDEX__)    do { if((__INDEX__) == COM1) {DISCOVERY_COM1_TX_GPIO_CLK_ENABLE();}} while(0)
+#define DISCOVERY_COMx_TX_GPIO_CLK_DISABLE(__INDEX__)   do { if((__INDEX__) == COM1) {DISCOVERY_COM1_TX_GPIO_CLK_DISABLE();}} while(0)
+
+#define DISCOVERY_COMx_RX_GPIO_CLK_ENABLE(__INDEX__)    do { if((__INDEX__) == COM1) {DISCOVERY_COM1_RX_GPIO_CLK_ENABLE();}} while(0)
+#define DISCOVERY_COMx_RX_GPIO_CLK_DISABLE(__INDEX__)   do { if((__INDEX__) == COM1) {DISCOVERY_COM1_RX_GPIO_CLK_DISABLE();}} while(0)
+
+
+/* User can use this section to tailor I2Cx instance used and associated resources */
+/* Definition for I2Cx resources */
+#define DISCOVERY_I2Cx                             I2C2
+#define DISCOVERY_I2Cx_CLK_ENABLE()                __HAL_RCC_I2C2_CLK_ENABLE()
+#define DISCOVERY_I2Cx_CLK_DISABLE()               __HAL_RCC_I2C2_CLK_DISABLE()   
+#define DISCOVERY_DMAx_CLK_ENABLE()                __HAL_RCC_DMA1_CLK_ENABLE()
+#define DISCOVERY_I2Cx_SCL_SDA_GPIO_CLK_ENABLE()   __HAL_RCC_GPIOB_CLK_ENABLE()
+#define DISCOVERY_I2Cx_SCL_SDA_GPIO_CLK_DISABLE()  __HAL_RCC_GPIOB_CLK_DISABLE()
+   
+#define DISCOVERY_I2Cx_FORCE_RESET()               __HAL_RCC_I2C2_FORCE_RESET()
+#define DISCOVERY_I2Cx_RELEASE_RESET()             __HAL_RCC_I2C2_RELEASE_RESET()
+
+/* Definition for I2Cx Pins */
+#define DISCOVERY_I2Cx_SCL_PIN                     GPIO_PIN_10
+#define DISCOVERY_I2Cx_SDA_PIN                     GPIO_PIN_11                                               
+#define DISCOVERY_I2Cx_SCL_SDA_GPIO_PORT           GPIOB
+#define DISCOVERY_I2Cx_SCL_SDA_AF                  GPIO_AF4_I2C2
+
+/* I2C interrupt requests */
+#define DISCOVERY_I2Cx_EV_IRQn                     I2C2_EV_IRQn
+#define DISCOVERY_I2Cx_ER_IRQn                     I2C2_ER_IRQn
+
+/* I2C clock speed configuration (in Hz)
+  WARNING:
+   Make sure that this define is not already declared in other files.
+   It can be used in parallel by other modules. */
+#ifndef DISCOVERY_I2C_SPEED
+ #define DISCOVERY_I2C_SPEED                             100000
+#endif /* DISCOVERY_I2C_SPEED */
+
+#ifndef DISCOVERY_I2Cx_TIMING  
+#define DISCOVERY_I2Cx_TIMING                     ((uint32_t)0x00702681)
+#endif /* DISCOVERY_I2Cx_TIMING */ 
+
+
+/* I2C Sensors address */
+/* LPS22HB (Pressure) I2C Address */
+#define LPS22HB_I2C_ADDRESS  (uint8_t)0xBA
+/* HTS221 (Humidity) I2C Address */
+#define HTS221_I2C_ADDRESS   (uint8_t)0xBE
+
+#ifdef USE_LPS22HB_TEMP
+/* LPS22HB Sensor hardware I2C address */ 
+#define TSENSOR_I2C_ADDRESS     LPS22HB_I2C_ADDRESS
+#else /* USE_HTS221_TEMP */
+/* HTS221 Sensor hardware I2C address */ 
+#define TSENSOR_I2C_ADDRESS     HTS221_I2C_ADDRESS
+#endif
+/**
+  * @}
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+                                               
+/** @defgroup STM32L475E_IOT01_LOW_LEVEL_Exported_Functions LOW LEVEL Exported Functions
+  * @{
+  */
+uint32_t         BSP_GetVersion(void);  
+void             BSP_LED_Init(Led_TypeDef Led);
+void             BSP_LED_DeInit(Led_TypeDef Led);
+void             BSP_LED_On(Led_TypeDef Led);
+void             BSP_LED_Off(Led_TypeDef Led);
+void             BSP_LED_Toggle(Led_TypeDef Led);
+void             BSP_PB_Init(Button_TypeDef Button, ButtonMode_TypeDef ButtonMode);
+void             BSP_PB_DeInit(Button_TypeDef Button);
+uint32_t         BSP_PB_GetState(Button_TypeDef Button);
+void             BSP_COM_Init(COM_TypeDef COM, UART_HandleTypeDef *husart);
+void             BSP_COM_DeInit(COM_TypeDef COM, UART_HandleTypeDef *huart);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L475E_IOT01_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/