ST Expansion SW Team / Mbed OS mbed-os-nfc04a1

Example program for the X-NUCLEO-NFC04A1

Dependencies:   BSP libNDEF ST25DV

X-NUCLEO-NFC04A1 dynamic NFC/RFID tag IC expansion board Firmware Package

Introduction

This firmware package includes Components Device Drivers, Board Support Package and example applications for STMicroelectronics X-NUCLEO-NFC04A1 dynamic NFC/RFID tag IC expansion board.

Example Application

This program gives the User the possibility to read or write the tag of the X-NUCLEO-NFC04A1. The user needs an NFC enabled device as a smartphone that has to be at least 10 cm close to the antenna of the X-NUCLEO-NFC04A1. The LEDs indicate the operational mode:

  • LED1 is on: by reading the tag the User obtains the parameters of the WiFi access points.
  • LED2 is on: by reading the tag the User is redirected to a website through the custom browser of the smartphone.
  • LED3 is on: the User can overwrite the value of the tag through the use of any NFC application.

Tested Platforms

This firmware has been tested on STM32 NUCLEO-F401RE

Diff: mbed-os.lib

Revision:
0:3f1a69fc394e
diff -r 000000000000 -r 3f1a69fc394e mbed-os.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os.lib	Thu Nov 14 11:23:21 2019 +0000
@@ -0,0 +1,1 @@
+https://github.com/ARMmbed/mbed-os/#679d24833acf0a0b5b0d528576bb37c70863bc4e