X_NUCLEO_53L1A1_mbed

Dependents of X_NUCLEO_53L1A1_mbed

A dependent is a program or library which makes use of this library.

Simple Ranging Example, using Expansion Board Sensor, driven via Interrupts.
Ranging with Central, Expansion Board, Sensor and Left/Right Satellite Board Sensors, using Interrupts, on Mbed OS 5.x.
Simple Ranging Example, using Expansion Board Sensor, driven via Interrupts, on Mbed OS 5.x.
Simple ranging example, using expansion and satellite board sensors, with mbed OS 5.x
Example of ranging using interrupt VL53L1X satellite, os5
Example of interrupt ranging using VL53L1X satellite sensor board
Ranging with Central, Expansion Board, Sensor and Left/Right Satellite Board Sensors, with Interrupts.
Ranging, using Polling, with Expansion and Satellite Board Sensors.
Simple Ranging with only the Time-of-Flight (ToF) Sensor on the X-NUCLEO-53L1A1 expansion board. Does not use Satellite boards.
Ranging using a VL53L1X Time-of-Flight (ToF) sensor Satellite board wired directly to an Host microcontroller board (eg, an STM32-Nucleo). No X-NUCLEO-53L1A1 expansion board required.
Ranging with the Time-of-Flight (ToF) sensors on the X-NUCLEO-53L1A1 expansion board, and 2 Satellite boards connected to the expansion board.
Simple, Mbed OS 5.x Ranging example, using only the VL53L1X Time-of-Flight (ToF) sensor on the X-NUCLEO-53L1A1 expansion board. Does Not use Satellite boards.
Mbed OS 5.x example, ranging with the VL53L1X Time-of-Flight (ToF) sensor on the X-NUCLEO-53L1A1 expansion board, and 2 VL53L1X Satellite boards, connected to the expansion board.
Range with a (green) VL53L1X Satellite board connected directly to the motherboard, without Expansion board support.
Simple Ranging example, using Polling, with Expansion Board and Satellite Boards.
Simple ranging example, using polling, with only the X-Nucleo_53L1A1 expansion board.
Detected people approaching if the distance is < 6 feet then LEDs blinking RED otherwise LEDs light green.
MbedOS 5.15.7 example, using Interrupt mode with expansion board onboard sensor. Serial port set to default (9600) baud.
MbedOS 6.10.0 example, using Interrupt mode with expansion board onboard sensor. Serial port set to default (9600) baud.