ST Expansion SW Team
The VL53L1CB proximity sensor, based on ST’s FlightSense™, Time-of-Flight technology.
Dependencies: X_NUCLEO_COMMON ST_INTERFACES
Dependents: VL53L1CB_noshield_1sensor_polls_auton VL53L1CB_noshield_1sensor_interrupt_auton X_NUCLEO_53L1A2
Based on VL53L1 library, this is a library for the VL53L1CB ToF chip.
Diff: inc/VL53L1CB.h
- Revision:
- 14:f06785b2a964
- Parent:
- 13:ea6d0e60fd02
- Child:
- 15:c0d8d300479f
diff -r ea6d0e60fd02 -r f06785b2a964 inc/VL53L1CB.h
--- a/inc/VL53L1CB.h Mon Jun 14 07:57:55 2021 +0000
+++ b/inc/VL53L1CB.h Sat Jun 19 16:45:54 2021 +0100
@@ -30,9 +30,19 @@
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*****************************************************************************/
-#ifndef __VL53L1X_CLASS_H
-#define __VL53L1X_CLASS_H
+#ifndef __VL53L1CB_CLASS_H
+#define __VL53L1CB_CLASS_H
+
+#ifdef _MSC_VER
+# ifdef VL53L1X_API_EXPORTS
+# define VL53L1X_API __declspec(dllexport)
+# else
+# define VL53L1X_API
+# endif
+#else
+# define VL53L1X_API
+#endif
/* Includes ------------------------------------------------------------------*/
@@ -53,16 +63,16 @@
/***********************************************************/
-#define VL53L1CB_IMPLEMENTATION_VER_MAJOR 1
-#define VL53L1CB_IMPLEMENTATION_VER_MINOR 0
-#define VL53L1CB_IMPLEMENTATION_VER_SUB 1
-#define VL53L1CB_IMPLEMENTATION_VER_REVISION 0000
+#define VL53L1_IMPLEMENTATION_VER_MAJOR 1
+#define VL53L1_IMPLEMENTATION_VER_MINOR 0
+#define VL53L1_IMPLEMENTATION_VER_SUB 1
+#define VL53L1_IMPLEMENTATION_VER_REVISION 0000
typedef int8_t VL53L1CB_ERROR;
//#define SOFT_RESET 0x0000
-#define VL53L1CB_I2C_SLAVE__DEVICE_ADDRESS 0x0001
-#define VL53L1CB_VHV_CONFIG__TIMEOUT_MACROP_LOOP_BOUND 0x0008
+#define VL53L1_I2C_SLAVE__DEVICE_ADDRESS 0x0001
+#define VL53L1_VHV_CONFIG__TIMEOUT_MACROP_LOOP_BOUND 0x0008
#define ALGO__CROSSTALK_COMPENSATION_PLANE_OFFSET_KCPS 0x0016
#define ALGO__CROSSTALK_COMPENSATION_X_PLANE_GRADIENT_KCPS 0x0018
#define ALGO__CROSSTALK_COMPENSATION_Y_PLANE_GRADIENT_KCPS 0x001A
@@ -81,6 +91,7 @@
#define RANGE_CONFIG__SIGMA_THRESH 0x0064
#define RANGE_CONFIG__MIN_COUNT_RATE_RTN_LIMIT_MCPS 0x0066
#define RANGE_CONFIG__VALID_PHASE_HIGH 0x0069
+#define VL53L1_SYSTEM__INTERMEASUREMENT_PERIOD 0x006C
#define SYSTEM__THRESH_HIGH 0x0072
#define SYSTEM__THRESH_LOW 0x0074
#define SD_CONFIG__WOI_SD0 0x0078
@@ -88,17 +99,23 @@
#define ROI_CONFIG__USER_ROI_CENTRE_SPAD 0x007F
#define ROI_CONFIG__USER_ROI_REQUESTED_GLOBAL_XY_SIZE 0x0080
#define SYSTEM__SEQUENCE_CONFIG 0x0081
+#define VL53L1_SYSTEM__GROUPED_PARAMETER_HOLD 0x0082
#define SYSTEM__INTERRUPT_CLEAR 0x0086
#define SYSTEM__MODE_START 0x0087
+#define VL53L1_RESULT__RANGE_STATUS 0x0089
+#define VL53L1_RESULT__DSS_ACTUAL_EFFECTIVE_SPADS_SD0 0x008C
#define RESULT__AMBIENT_COUNT_RATE_MCPS_SD 0x0090
-#define VL53L1CB_RESULT__FINAL_CROSSTALK_CORRECTED_RANGE_MM_SD0 0x0096
-#define VL53L1CB_FIRMWARE__SYSTEM_STATUS 0x00E5
+#define VL53L1_RESULT__FINAL_CROSSTALK_CORRECTED_RANGE_MM_SD0 0x0096
+#define VL53L1_RESULT__PEAK_SIGNAL_COUNT_RATE_CROSSTALK_CORRECTED_MCPS_SD0 0x0098
+#define VL53L1_RESULT__OSC_CALIBRATE_VAL 0x00DE
+#define VL53L1_FIRMWARE__SYSTEM_STATUS 0x00E5
+#define VL53L1_IDENTIFICATION__MODEL_ID 0x010F
+#define VL53L1_ROI_CONFIG__MODE_ROI_CENTRE_SPAD 0x013E
+#define VL53L1_DEFAULT_DEVICE_ADDRESS 0x52
-#define VL53L1CB_DEFAULT_DEVICE_ADDRESS 0x52
-
-#define VL53L1CB_REG_IDENTIFICATION_MODEL_ID 0x010F
+#define VL53L1_REG_IDENTIFICATION_MODEL_ID 0x010F
/****************************************
* PRIVATE define do not edit
@@ -116,7 +133,7 @@
/* Classes -------------------------------------------------------------------*/
-/** Class representing a VL53L1CB sensor component
+/** Class representing a VL53L1 sensor component
*/
class VL53L1CB : public RangeSensor
{
@@ -132,8 +149,8 @@
* @param[in] &pin_gpio1 pin Mbed InterruptIn PinName to be used as component GPIO_1 INT
* @param[in] DevAddr device address, 0x52 by default
*/
-/*
- VL53L1CB(ToF_DevI2C *i2c, DigitalOut *pin, PinName pin_gpio1, uint8_t dev_addr = VL53L1CB_DEFAULT_DEVICE_ADDRESS)
+
+ VL53L1CB(ToF_DevI2C *i2c, DigitalOut *pin, PinName pin_gpio1, uint8_t dev_addr = VL53L1_DEFAULT_DEVICE_ADDRESS)
: RangeSensor(), dev_i2c(i2c), _gpio0(pin)
{
MyDevice.i2c_slave_address=dev_addr;
@@ -146,7 +163,7 @@
_gpio1Int = NULL;
}
}
-*/
+
/** Constructor 2 (STMPE1600DigiOut)
* @param[in] i2c device I2C to be used for communication
@@ -155,7 +172,7 @@
* @param[in] device address, 0x29 by default
*/
VL53L1CB(ToF_DevI2C *i2c, Stmpe1600DigiOut *pin, PinName pin_gpio1,
- uint8_t dev_addr = VL53L1CB_DEFAULT_DEVICE_ADDRESS)
+ uint8_t dev_addr = VL53L1_DEFAULT_DEVICE_ADDRESS)
: dev_i2c(i2c), _expgpio0(pin)
{
MyDevice.i2c_slave_address=dev_addr;
@@ -183,7 +200,7 @@
VL53L1_DEV getDevicePtr() { return Device; }
- /* warning: VL53L1CB class inherits from GenericSensor, RangeSensor and LightSensor, that haven`t a destructor.
+ /* warning: VL53L1 class inherits from GenericSensor, RangeSensor and LightSensor, that haven`t a destructor.
The warning should request to introduce a virtual destructor to make sure to delete the object */
/*** Interface Methods ***/
@@ -195,7 +212,7 @@
/* turns on the sensor */
virtual void VL53L1CB_On(void)
{
- printf("VL53L1CB_On\r\n");
+ printf("VL53L1_On\r\n");
if (_gpio0) {
*_gpio0 = 1;
} else {
@@ -302,15 +319,15 @@
ExpanderData[0] = 0;
ExpanderData[1] = 0;
rl_id = 0;
- dev_i2c->ToF_i2c_read(&ExpanderData[0], Device->i2c_slave_address, VL53L1CB_REG_IDENTIFICATION_MODEL_ID, 2);
+ dev_i2c->ToF_i2c_read(&ExpanderData[0], Device->i2c_slave_address, VL53L1_REG_IDENTIFICATION_MODEL_ID, 2);
rl_id = (ExpanderData[0] << 8) + ExpanderData[1];
printf("Model ID is: %d (%X) \r\n",rl_id, rl_id);
uint8_t tmp = 0;
- ExpanderData[0] = VL53L1CB_FIRMWARE__SYSTEM_STATUS >> 8;
- ExpanderData[1] = VL53L1CB_FIRMWARE__SYSTEM_STATUS & 0x0FF;
- dev_i2c->ToF_i2c_read(&tmp, Device->i2c_slave_address, VL53L1CB_FIRMWARE__SYSTEM_STATUS, 1);
+ ExpanderData[0] = VL53L1_FIRMWARE__SYSTEM_STATUS >> 8;
+ ExpanderData[1] = VL53L1_FIRMWARE__SYSTEM_STATUS & 0x0FF;
+ dev_i2c->ToF_i2c_read(&tmp, Device->i2c_slave_address, VL53L1_FIRMWARE__SYSTEM_STATUS, 1);
printf("Firmware system is: %d\r\n",tmp);
@@ -497,7 +514,7 @@
VL53L1CB_ERROR VL53L1CB_StaticInit();
- VL53L1CB_ERROR VL53L1CB_ClearInterruptAndStartMeasurement();
+ VL53L1CB_ERROR VL53L1CB_learInterruptAndStartMeasurement();
VL53L1CB_ERROR VL53L1CB_GetRangingMeasurementData(
VL53L1_RangingMeasurementData_t *pRangingMeasurementData);
@@ -621,7 +638,7 @@
VL53L1CB_ERROR VL53L1CB_SetROI(VL53L1_RoiConfig_t *pRoiConfig);
- VL53L1CB_ERROR VL53L1CB_GetROI(VL53L1_RoiConfig_t *pRoiConfig);
+ VL53L1CB_ERROR VL53L1CB_GetROI(VL53L1_RoiConfig_t *pRoiConfig);
VL53L1CB_ERROR VL53L1CB_GetNumberOfSequenceSteps(uint8_t *pNumberOfSequenceSteps);
@@ -650,13 +667,13 @@
/* Write and read functions from I2C */
- VL53L1CB_ERROR VL53L1CB_WrByte(VL53L1_DEV dev, uint16_t index, uint8_t data);
- VL53L1CB_ERROR VL53L1CB_WrWord(VL53L1_DEV dev, uint16_t index, uint16_t data);
- VL53L1CB_ERROR VL53L1CB_WrDWord(VL53L1_DEV dev, uint16_t index, uint32_t data);
- VL53L1CB_ERROR VL53L1CB_RdByte(VL53L1_DEV dev, uint16_t index, uint8_t *data);
- VL53L1CB_ERROR VL53L1CB_RdWord(VL53L1_DEV dev, uint16_t index, uint16_t *data);
- VL53L1CB_ERROR VL53L1CB_RdDWord(VL53L1_DEV dev, uint16_t index, uint32_t *data);
- VL53L1CB_ERROR VL53L1CB_UpdateByte(VL53L1_DEV dev, uint16_t index, uint8_t AndData, uint8_t OrData);
+ VL53L1CB_ERROR VL53L1_WrByte(VL53L1_DEV dev, uint16_t index, uint8_t data); // DON'T CHANGE NAME, SATELLITES STOP WORKING
+ VL53L1CB_ERROR VL53L1_WrWord(VL53L1_DEV dev, uint16_t index, uint16_t data); // DON'T CHANGE NAME, SATELLITES STOP WORKING
+ VL53L1CB_ERROR VL53L1_WrDWord(VL53L1_DEV dev, uint16_t index, uint32_t data); // DON'T CHANGE NAME, SATELLITES STOP WORKING
+ VL53L1CB_ERROR VL53L1_RdByte(VL53L1_DEV dev, uint16_t index, uint8_t *data); // DON'T CHANGE NAME, SATELLITES STOP WORKING
+ VL53L1CB_ERROR VL53L1_RdWord(VL53L1_DEV dev, uint16_t index, uint16_t *data); // DON'T CHANGE NAME, SATELLITES STOP WORKING
+ VL53L1CB_ERROR VL53L1_RdDWord(VL53L1_DEV dev, uint16_t index, uint32_t *data);// DON'T CHANGE NAME, SATELLITES STOP WORKING
+ VL53L1CB_ERROR VL53L1_UpdateByte(VL53L1_DEV dev, uint16_t index, uint8_t AndData, uint8_t OrData); // DON'T CHANGE NAME, SATELLITES STOP WORKING
VL53L1CB_ERROR VL53L1CB_WriteMulti(VL53L1_DEV Dev, uint16_t index, uint8_t *pdata, uint32_t count);
VL53L1CB_ERROR VL53L1CB_ReadMulti(VL53L1_DEV Dev, uint16_t index, uint8_t *pdata, uint32_t count);