Diff: rfal_t1t.h

Revision:

0:75fc82583a41

diff -r 000000000000 -r 75fc82583a41 rfal_t1t.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/rfal_t1t.h	Thu Nov 14 14:34:50 2019 +0000
@@ -0,0 +1,187 @@
+
+/******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2016 STMicroelectronics</center></h2>
+  *
+  * Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/myliberty
+  *
+  * Unless required by applicable law or agreed to in writing, software
+  * distributed under the License is distributed on an "AS IS" BASIS,
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
+  * AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+  * FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+******************************************************************************/
+
+/*
+ *      PROJECT:   ST25R391x firmware
+ *      $Revision: $
+ *      LANGUAGE:  ISO C99
+ */
+
+/*! \file rfal_t1t.h
+ *
+ *  \author Gustavo Patricio
+ *
+ *  \brief Provides NFC-A T1T convenience methods and definitions
+ *
+ *  This module provides an interface to perform as a NFC-A Reader/Writer
+ *  to handle a Type 1 Tag T1T (Topaz)
+ *
+ *
+ * @addtogroup RFAL
+ * @{
+ *
+ * @addtogroup RFAL-AL
+ * @brief RFAL Abstraction Layer
+ * @{
+ *
+ * @addtogroup T1T
+ * @brief RFAL T1T Module
+ * @{
+ *
+ */
+
+
+#ifndef RFAL_T1T_H
+#define RFAL_T1T_H
+
+/*
+ ******************************************************************************
+ * INCLUDES
+ ******************************************************************************
+ */
+#include "platform1.h"
+#include "st_errno.h"
+#include "rfal_rf.h"
+
+/*
+ ******************************************************************************
+ * GLOBAL DEFINES
+ ******************************************************************************
+ */
+#define RFAL_T1T_UID_LEN               4   /*!< T1T UID length of cascade level 1 only tag  */
+#define RFAL_T1T_HR_LENGTH             2   /*!< T1T HR(Header ROM) length                   */
+
+#define RFAL_T1T_HR0_NDEF_MASK      0xF0   /*!< T1T HR0 NDEF capability mask  T1T 1.2 2.2.2 */
+#define RFAL_T1T_HR0_NDEF_SUPPORT   0x10   /*!< T1T HR0 NDEF capable value    T1T 1.2 2.2.2 */
+
+
+/*! NFC-A T1T (Topaz) command set */
+typedef enum
+{
+    RFAL_T1T_CMD_RID      = 0x78,          /*!< T1T Read UID                                */
+    RFAL_T1T_CMD_RALL     = 0x00,          /*!< T1T Read All                                */
+    RFAL_T1T_CMD_READ     = 0x01,          /*!< T1T Read                                    */
+    RFAL_T1T_CMD_WRITE_E  = 0x53,          /*!< T1T Write with erase (single byte)          */
+    RFAL_T1T_CMD_WRITE_NE = 0x1A           /*!< T1T Write with no erase (single byte)       */
+} rfalT1Tcmds;
+
+
+/*
+******************************************************************************
+* GLOBAL TYPES
+******************************************************************************
+*/
+
+
+/*! NFC-A T1T (Topaz) RID_RES  Digital 1.1  10.6.2 & Table 50 */
+typedef struct
+{
+    uint8_t hr0;                           /*!< T1T Header ROM: HR0                         */
+    uint8_t hr1;                           /*!< T1T Header ROM: HR1                         */
+    uint8_t uid[RFAL_T1T_UID_LEN];         /*!< T1T UID                                     */
+} rfalT1TRidRes;
+
+/*
+******************************************************************************
+* GLOBAL FUNCTION PROTOTYPES
+******************************************************************************
+*/
+
+
+/*!
+ *****************************************************************************
+ * \brief  Initialize NFC-A T1T Poller mode
+ *
+ * This methods configures RFAL RF layer to perform as a
+ * NFC-A T1T Poller/RW (Topaz) including all default timings
+ *
+ * \return ERR_WRONG_STATE  : RFAL not initialized or mode not set
+ * \return ERR_NONE         : No error
+ *****************************************************************************
+ */
+ReturnCode rfalT1TPollerInitialize( SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 );
+
+
+/*!
+ *****************************************************************************
+ * \brief  NFC-A T1T Poller RID
+ *
+ * This method reads the UID of a NFC-A T1T Listener device
+ *
+ *
+ * \param[out]  ridRes : pointer to place the RID_RES
+ *
+ * \return ERR_WRONG_STATE  : RFAL not initialized or mode not set
+ * \return ERR_PARAM        : Invalid parameter
+ * \return ERR_NONE         : No error
+ *****************************************************************************
+ */
+ReturnCode rfalT1TPollerRid( rfalT1TRidRes *ridRes, SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 );
+
+
+/*!
+ *****************************************************************************
+ * \brief  NFC-A T1T Poller RALL
+ *
+ * This method send a Read All command to a NFC-A T1T Listener device
+ *
+ *
+ * \param[in]   uid       : the UID of the device to read data
+ * \param[out]  rxBuf     : pointer to place the read data
+ * \param[in]   rxBufLen  : size of rxBuf
+ * \param[out]  rxRcvdLen : actual received data
+ *
+ * \return ERR_WRONG_STATE  : RFAL not initialized or mode not set
+ * \return ERR_PARAM        : Invalid parameter
+ * \return ERR_NONE         : No error
+ *****************************************************************************
+ */
+ReturnCode rfalT1TPollerRall( uint8_t* uid, uint8_t* rxBuf, uint16_t rxBufLen, uint16_t *rxRcvdLen,SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 );
+
+
+/*!
+ *****************************************************************************
+ * \brief  NFC-A T1T Poller Write
+ *
+ * This method writes the given data on the address of a NFC-A T1T Listener device
+ *
+ *
+ * \param[in]   uid       : the UID of the device to read data
+ * \param[in]   address   : address to write the data
+ * \param[in]   data      : the data to be written
+ *
+ * \return ERR_WRONG_STATE  : RFAL not initialized or mode not set
+ * \return ERR_PARAM        : Invalid parameter
+ * \return ERR_NONE         : No error
+ *****************************************************************************
+ */
+ReturnCode rfalT1TPollerWrite( uint8_t* uid, uint8_t address, uint8_t data,SPI* mspiChannel, ST25R3911* mST25, DigitalOut* gpio_cs, InterruptIn* IRQ, DigitalOut* fieldLED_01, DigitalOut* fieldLED_02, DigitalOut* fieldLED_03, DigitalOut* fieldLED_04, DigitalOut* fieldLED_05, DigitalOut* fieldLED_06 );
+
+#endif /* RFAL_T1T_H */
+
+/**
+  * @}
+  *
+  * @}
+  *
+  * @}
+  */