ST Americas mbed Team / Nucleo_BLE_BlueNRG

BLE_BlueNRG for Nucleo board

Dependents:   Nucleo_BLE_HeartRate Nucleo_BLE_UART Nucleo_BLE_UART

Warning: Deprecated!

Supported drivers and applications can be found at this link.

BlueNRGGap.cpp@2:905715088a9b, 2014-12-24 (annotated)

Committer:
sjallouli
Date:
Wed Dec 24 18:01:41 2014 +0000
Revision:
2:905715088a9b
Parent:
0:a948f5f3904c 
Add USER_BUTTON interrupt configuration

Who changed what in which revision?

UserRevisionLine numberNew contents of line
sjallouli 0:a948f5f3904c 1 /* mbed Microcontroller Library
sjallouli 0:a948f5f3904c 2 * Copyright (c) 2006-2013 ARM Limited
sjallouli 0:a948f5f3904c 3 *
sjallouli 0:a948f5f3904c 4 * Licensed under the Apache License, Version 2.0 (the "License");
sjallouli 0:a948f5f3904c 5 * you may not use this file except in compliance with the License.
sjallouli 0:a948f5f3904c 6 * You may obtain a copy of the License at
sjallouli 0:a948f5f3904c 7 *
sjallouli 0:a948f5f3904c 8 * http://www.apache.org/licenses/LICENSE-2.0
sjallouli 0:a948f5f3904c 9 *
sjallouli 0:a948f5f3904c 10 * Unless required by applicable law or agreed to in writing, software
sjallouli 0:a948f5f3904c 11 * distributed under the License is distributed on an "AS IS" BASIS,
sjallouli 0:a948f5f3904c 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
sjallouli 0:a948f5f3904c 13 * See the License for the specific language governing permissions and
sjallouli 0:a948f5f3904c 14 * limitations under the License.
sjallouli 0:a948f5f3904c 15 */
sjallouli 0:a948f5f3904c 16
sjallouli 0:a948f5f3904c 17 #include "BlueNRGDevice.h"
sjallouli 0:a948f5f3904c 18 #include "mbed.h"
sjallouli 0:a948f5f3904c 19 #include "Payload.h"
sjallouli 0:a948f5f3904c 20 #include "Utils.h"
sjallouli 0:a948f5f3904c 21
sjallouli 0:a948f5f3904c 22 //Local Variables
sjallouli 0:a948f5f3904c 23 const char *local_name = NULL;
sjallouli 0:a948f5f3904c 24 uint8_t local_name_length = 0;
sjallouli 0:a948f5f3904c 25 const uint8_t *scan_response_payload = NULL;
sjallouli 0:a948f5f3904c 26 uint8_t scan_rsp_length = 0;
sjallouli 0:a948f5f3904c 27 uint8_t servUuidlength = 0;
sjallouli 0:a948f5f3904c 28 uint8_t* servUuidData = NULL;
sjallouli 0:a948f5f3904c 29
sjallouli 0:a948f5f3904c 30 uint32_t advtInterval = 0;
sjallouli 0:a948f5f3904c 31
sjallouli 0:a948f5f3904c 32 /**************************************************************************/
sjallouli 0:a948f5f3904c 33 /*!
sjallouli 0:a948f5f3904c 34 @brief Sets the advertising parameters and payload for the device.
sjallouli 0:a948f5f3904c 35 Note: Some data types give error when their adv data is updated using aci_gap_update_adv_data() API
sjallouli 0:a948f5f3904c 36
sjallouli 0:a948f5f3904c 37 @param[in] params
sjallouli 0:a948f5f3904c 38 Basic advertising details, including the advertising
sjallouli 0:a948f5f3904c 39 delay, timeout and how the device should be advertised
sjallouli 0:a948f5f3904c 40 @params[in] advData
sjallouli 0:a948f5f3904c 41 The primary advertising data payload
sjallouli 0:a948f5f3904c 42 @params[in] scanResponse
sjallouli 0:a948f5f3904c 43 The optional Scan Response payload if the advertising
sjallouli 0:a948f5f3904c 44 type is set to \ref GapAdvertisingParams::ADV_SCANNABLE_UNDIRECTED
sjallouli 0:a948f5f3904c 45 in \ref GapAdveritinngParams
sjallouli 0:a948f5f3904c 46
sjallouli 0:a948f5f3904c 47 @returns \ref ble_error_t
sjallouli 0:a948f5f3904c 48
sjallouli 0:a948f5f3904c 49 @retval BLE_ERROR_NONE
sjallouli 0:a948f5f3904c 50 Everything executed properly
sjallouli 0:a948f5f3904c 51
sjallouli 0:a948f5f3904c 52 @retval BLE_ERROR_BUFFER_OVERFLOW
sjallouli 0:a948f5f3904c 53 The proposed action would cause a buffer overflow. All
sjallouli 0:a948f5f3904c 54 advertising payloads must be <= 31 bytes, for example.
sjallouli 0:a948f5f3904c 55
sjallouli 0:a948f5f3904c 56 @retval BLE_ERROR_NOT_IMPLEMENTED
sjallouli 0:a948f5f3904c 57 A feature was requested that is not yet supported in the
sjallouli 0:a948f5f3904c 58 nRF51 firmware or hardware.
sjallouli 0:a948f5f3904c 59
sjallouli 0:a948f5f3904c 60 @retval BLE_ERROR_PARAM_OUT_OF_RANGE
sjallouli 0:a948f5f3904c 61 One of the proposed values is outside the valid range.
sjallouli 0:a948f5f3904c 62
sjallouli 0:a948f5f3904c 63 @section EXAMPLE
sjallouli 0:a948f5f3904c 64
sjallouli 0:a948f5f3904c 65 @code
sjallouli 0:a948f5f3904c 66
sjallouli 0:a948f5f3904c 67 @endcode
sjallouli 0:a948f5f3904c 68 */
sjallouli 0:a948f5f3904c 69 /**************************************************************************/
sjallouli 0:a948f5f3904c 70 ble_error_t BlueNRGGap::setAdvertisingData(const GapAdvertisingData &advData, const GapAdvertisingData &scanResponse)
sjallouli 0:a948f5f3904c 71 {
sjallouli 0:a948f5f3904c 72 DEBUG("BlueNRGGap::setAdvertisingData\n\r");
sjallouli 0:a948f5f3904c 73 /* Make sure we don't exceed the advertising payload length */
sjallouli 0:a948f5f3904c 74 if (advData.getPayloadLen() > GAP_ADVERTISING_DATA_MAX_PAYLOAD) {
sjallouli 0:a948f5f3904c 75 return BLE_ERROR_BUFFER_OVERFLOW;
sjallouli 0:a948f5f3904c 76 }
sjallouli 0:a948f5f3904c 77
sjallouli 0:a948f5f3904c 78 /* Make sure we have a payload! */
sjallouli 0:a948f5f3904c 79 if (advData.getPayloadLen() <= 0) {
sjallouli 0:a948f5f3904c 80 return BLE_ERROR_PARAM_OUT_OF_RANGE;
sjallouli 0:a948f5f3904c 81 } else {
sjallouli 0:a948f5f3904c 82 PayloadPtr loadPtr(advData.getPayload(), advData.getPayloadLen());
sjallouli 0:a948f5f3904c 83 for(uint8_t index=0; index<loadPtr.getPayloadUnitCount(); index++) {
sjallouli 0:a948f5f3904c 84 PayloadUnit unit = loadPtr.getUnitAtIndex(index);
sjallouli 0:a948f5f3904c 85
sjallouli 0:a948f5f3904c 86 DEBUG("adData[%d].length=%d\n\r", index,(uint8_t)(*loadPtr.getUnitAtIndex(index).getLenPtr()));
sjallouli 0:a948f5f3904c 87 DEBUG("adData[%d].AdType=0x%x\n\r", index,(uint8_t)(*loadPtr.getUnitAtIndex(index).getAdTypePtr()));
sjallouli 0:a948f5f3904c 88
sjallouli 0:a948f5f3904c 89 switch(*loadPtr.getUnitAtIndex(index).getAdTypePtr()) {
sjallouli 0:a948f5f3904c 90 case GapAdvertisingData::FLAGS: /* ref *Flags */
sjallouli 0:a948f5f3904c 91 {
sjallouli 0:a948f5f3904c 92 //Check if Flags are OK. BlueNRG only supports LE Mode.
sjallouli 0:a948f5f3904c 93 uint8_t *flags = loadPtr.getUnitAtIndex(index).getDataPtr();
sjallouli 0:a948f5f3904c 94 if((*flags & GapAdvertisingData::BREDR_NOT_SUPPORTED) != GapAdvertisingData::BREDR_NOT_SUPPORTED) {
sjallouli 0:a948f5f3904c 95 DEBUG("BlueNRG does not support BR/EDR Mode");
sjallouli 0:a948f5f3904c 96 return BLE_ERROR_PARAM_OUT_OF_RANGE;
sjallouli 0:a948f5f3904c 97 }
sjallouli 0:a948f5f3904c 98
sjallouli 0:a948f5f3904c 99 break;
sjallouli 0:a948f5f3904c 100 }
sjallouli 0:a948f5f3904c 101 case GapAdvertisingData::INCOMPLETE_LIST_16BIT_SERVICE_IDS: /**< Incomplete list of 16-bit Service IDs */
sjallouli 0:a948f5f3904c 102 {
sjallouli 0:a948f5f3904c 103 break;
sjallouli 0:a948f5f3904c 104 }
sjallouli 0:a948f5f3904c 105 case GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS: /**< Complete list of 16-bit Service IDs */
sjallouli 0:a948f5f3904c 106 {
sjallouli 0:a948f5f3904c 107 DEBUG("Advertising type: COMPLETE_LIST_16BIT_SERVICE_IDS\n\r");
sjallouli 0:a948f5f3904c 108 DEBUG("Advertising type: COMPLETE_LIST_16BIT_SERVICE_IDS\n");
sjallouli 0:a948f5f3904c 109 #if 0
sjallouli 0:a948f5f3904c 110 int err = aci_gap_update_adv_data(*loadPtr.getUnitAtIndex(index).getLenPtr(), loadPtr.getUnitAtIndex(index).getAdTypePtr());
sjallouli 0:a948f5f3904c 111 if(BLE_STATUS_SUCCESS!=err) {
sjallouli 0:a948f5f3904c 112 DEBUG("error occurred while adding adv data\n");
sjallouli 0:a948f5f3904c 113 return BLE_ERROR_PARAM_OUT_OF_RANGE; // no other suitable error code is available
sjallouli 0:a948f5f3904c 114 }
sjallouli 0:a948f5f3904c 115 #endif
sjallouli 0:a948f5f3904c 116 break;
sjallouli 0:a948f5f3904c 117 }
sjallouli 0:a948f5f3904c 118 case GapAdvertisingData::INCOMPLETE_LIST_32BIT_SERVICE_IDS: /**< Incomplete list of 32-bit Service IDs (not relevant for Bluetooth 4.0) */
sjallouli 0:a948f5f3904c 119 {
sjallouli 0:a948f5f3904c 120 break;
sjallouli 0:a948f5f3904c 121 }
sjallouli 0:a948f5f3904c 122 case GapAdvertisingData::COMPLETE_LIST_32BIT_SERVICE_IDS: /**< Complete list of 32-bit Service IDs (not relevant for Bluetooth 4.0) */
sjallouli 0:a948f5f3904c 123 {
sjallouli 0:a948f5f3904c 124 break;
sjallouli 0:a948f5f3904c 125 }
sjallouli 0:a948f5f3904c 126 case GapAdvertisingData::INCOMPLETE_LIST_128BIT_SERVICE_IDS: /**< Incomplete list of 128-bit Service IDs */
sjallouli 0:a948f5f3904c 127 {
sjallouli 0:a948f5f3904c 128 break;
sjallouli 0:a948f5f3904c 129 }
sjallouli 0:a948f5f3904c 130 case GapAdvertisingData::COMPLETE_LIST_128BIT_SERVICE_IDS: /**< Complete list of 128-bit Service IDs */
sjallouli 0:a948f5f3904c 131 {
sjallouli 0:a948f5f3904c 132 break;
sjallouli 0:a948f5f3904c 133 }
sjallouli 0:a948f5f3904c 134 case GapAdvertisingData::SHORTENED_LOCAL_NAME: /**< Shortened Local Name */
sjallouli 0:a948f5f3904c 135 {
sjallouli 0:a948f5f3904c 136 break;
sjallouli 0:a948f5f3904c 137 }
sjallouli 0:a948f5f3904c 138 case GapAdvertisingData::COMPLETE_LOCAL_NAME: /**< Complete Local Name */
sjallouli 0:a948f5f3904c 139 {
sjallouli 0:a948f5f3904c 140 DEBUG("Advertising type: COMPLETE_LOCAL_NAME\n\r");
sjallouli 0:a948f5f3904c 141 loadPtr.getUnitAtIndex(index).printDataAsString();
sjallouli 0:a948f5f3904c 142 local_name_length = *loadPtr.getUnitAtIndex(index).getLenPtr()-1;
sjallouli 0:a948f5f3904c 143 local_name = (const char*)loadPtr.getUnitAtIndex(index).getAdTypePtr();
sjallouli 0:a948f5f3904c 144 //COMPLETE_LOCAL_NAME is only advertising device name. Gatt Device Name is not the same.(Must be set right after GAP/GATT init?)
sjallouli 0:a948f5f3904c 145
sjallouli 0:a948f5f3904c 146 DEBUG("device_name length=%d\n\r", local_name_length);
sjallouli 0:a948f5f3904c 147 break;
sjallouli 0:a948f5f3904c 148 }
sjallouli 0:a948f5f3904c 149 case GapAdvertisingData::TX_POWER_LEVEL: /**< TX Power Level (in dBm) */
sjallouli 0:a948f5f3904c 150 {
sjallouli 0:a948f5f3904c 151 DEBUG("Advertising type: TX_POWER_LEVEL\n\r");
sjallouli 0:a948f5f3904c 152 int8_t dbm = *loadPtr.getUnitAtIndex(index).getDataPtr();
sjallouli 0:a948f5f3904c 153 int8_t enHighPower = 0;
sjallouli 0:a948f5f3904c 154 int8_t paLevel = 0;
sjallouli 0:a948f5f3904c 155 int8_t dbmActuallySet = getHighPowerAndPALevelValue(dbm, enHighPower, paLevel);
sjallouli 0:a948f5f3904c 156 DEBUG("dbm=%d, dbmActuallySet=%d\n\r", dbm, dbmActuallySet);
sjallouli 0:a948f5f3904c 157 DEBUG("enHighPower=%d, paLevel=%d\n\r", enHighPower, paLevel);
sjallouli 0:a948f5f3904c 158 aci_hal_set_tx_power_level(enHighPower, paLevel);
sjallouli 0:a948f5f3904c 159 break;
sjallouli 0:a948f5f3904c 160 }
sjallouli 0:a948f5f3904c 161 case GapAdvertisingData::DEVICE_ID: /**< Device ID */
sjallouli 0:a948f5f3904c 162 {
sjallouli 0:a948f5f3904c 163 break;
sjallouli 0:a948f5f3904c 164 }
sjallouli 0:a948f5f3904c 165 case GapAdvertisingData::SLAVE_CONNECTION_INTERVAL_RANGE: /**< Slave :Connection Interval Range */
sjallouli 0:a948f5f3904c 166 {
sjallouli 0:a948f5f3904c 167 break;
sjallouli 0:a948f5f3904c 168 }
sjallouli 0:a948f5f3904c 169 case GapAdvertisingData::SERVICE_DATA: /**< Service Data */
sjallouli 0:a948f5f3904c 170 {
sjallouli 0:a948f5f3904c 171 break;
sjallouli 0:a948f5f3904c 172 }
sjallouli 0:a948f5f3904c 173 case GapAdvertisingData::APPEARANCE:
sjallouli 0:a948f5f3904c 174 {
sjallouli 0:a948f5f3904c 175 /*
sjallouli 0:a948f5f3904c 176 Tested with GapAdvertisingData::GENERIC_PHONE.
sjallouli 0:a948f5f3904c 177 for other appearances BLE Scanner android app is not behaving properly
sjallouli 0:a948f5f3904c 178 */
sjallouli 0:a948f5f3904c 179 DEBUG("Advertising type: APPEARANCE\n\r");
sjallouli 0:a948f5f3904c 180 const char *deviceAppearance = NULL;
sjallouli 0:a948f5f3904c 181 deviceAppearance = (const char*)loadPtr.getUnitAtIndex(index).getDataPtr(); // to be set later when startAdvertising() is called
sjallouli 0:a948f5f3904c 182
sjallouli 0:a948f5f3904c 183 uint8_t Appearance[2];
sjallouli 0:a948f5f3904c 184 uint16_t devP = (uint16_t)*deviceAppearance;
sjallouli 0:a948f5f3904c 185 STORE_LE_16(Appearance, (uint16_t)devP);
sjallouli 0:a948f5f3904c 186
sjallouli 0:a948f5f3904c 187 DEBUG("input: deviceAppearance= 0x%x 0x%x..., strlen(deviceAppearance)=%d\n\r", Appearance[1], Appearance[0], (uint8_t)*loadPtr.getUnitAtIndex(index).getLenPtr()-1); /**< \ref Appearance */
sjallouli 0:a948f5f3904c 188
sjallouli 0:a948f5f3904c 189 aci_gatt_update_char_value(g_gap_service_handle, g_appearance_char_handle, 0, 2, (tHalUint8 *)deviceAppearance);//not using array Appearance[2]
sjallouli 0:a948f5f3904c 190 break;
sjallouli 0:a948f5f3904c 191 }
sjallouli 0:a948f5f3904c 192 case GapAdvertisingData::ADVERTISING_INTERVAL: /**< Advertising Interval */
sjallouli 0:a948f5f3904c 193 {
sjallouli 0:a948f5f3904c 194 advtInterval = (uint16_t)(*loadPtr.getUnitAtIndex(index).getDataPtr());
sjallouli 0:a948f5f3904c 195 DEBUG("advtInterval=%d\n\r", advtInterval);
sjallouli 0:a948f5f3904c 196 break;
sjallouli 0:a948f5f3904c 197 }
sjallouli 0:a948f5f3904c 198 case GapAdvertisingData::MANUFACTURER_SPECIFIC_DATA: /**< Manufacturer Specific Data */
sjallouli 0:a948f5f3904c 199 {
sjallouli 0:a948f5f3904c 200 break;
sjallouli 0:a948f5f3904c 201 }
sjallouli 0:a948f5f3904c 202
sjallouli 0:a948f5f3904c 203 }
sjallouli 0:a948f5f3904c 204 }
sjallouli 0:a948f5f3904c 205 //Set the SCAN_RSP Payload
sjallouli 0:a948f5f3904c 206 scan_response_payload = scanResponse.getPayload();
sjallouli 0:a948f5f3904c 207 scan_rsp_length = scanResponse.getPayloadLen();
sjallouli 0:a948f5f3904c 208 }
sjallouli 0:a948f5f3904c 209 return BLE_ERROR_NONE;
sjallouli 0:a948f5f3904c 210 }
sjallouli 0:a948f5f3904c 211
sjallouli 0:a948f5f3904c 212 /**************************************************************************/
sjallouli 0:a948f5f3904c 213 /*!
sjallouli 0:a948f5f3904c 214 @brief Starts the BLE HW, initialising any services that were
sjallouli 0:a948f5f3904c 215 added before this function was called.
sjallouli 0:a948f5f3904c 216
sjallouli 0:a948f5f3904c 217 @note All services must be added before calling this function!
sjallouli 0:a948f5f3904c 218
sjallouli 0:a948f5f3904c 219 @returns ble_error_t
sjallouli 0:a948f5f3904c 220
sjallouli 0:a948f5f3904c 221 @retval BLE_ERROR_NONE
sjallouli 0:a948f5f3904c 222 Everything executed properly
sjallouli 0:a948f5f3904c 223
sjallouli 0:a948f5f3904c 224 @section EXAMPLE
sjallouli 0:a948f5f3904c 225
sjallouli 0:a948f5f3904c 226 @code
sjallouli 0:a948f5f3904c 227
sjallouli 0:a948f5f3904c 228 @endcode
sjallouli 0:a948f5f3904c 229 */
sjallouli 0:a948f5f3904c 230 /**************************************************************************/
sjallouli 0:a948f5f3904c 231 ble_error_t BlueNRGGap::startAdvertising(const GapAdvertisingParams &params)
sjallouli 0:a948f5f3904c 232 {
sjallouli 0:a948f5f3904c 233 /* Make sure we support the advertising type */
sjallouli 0:a948f5f3904c 234 if (params.getAdvertisingType() == GapAdvertisingParams::ADV_CONNECTABLE_DIRECTED) {
sjallouli 0:a948f5f3904c 235 /* ToDo: This requires a propery security implementation, etc. */
sjallouli 0:a948f5f3904c 236 return BLE_ERROR_NOT_IMPLEMENTED;
sjallouli 0:a948f5f3904c 237 }
sjallouli 0:a948f5f3904c 238
sjallouli 0:a948f5f3904c 239 /* Check interval range */
sjallouli 0:a948f5f3904c 240 if (params.getAdvertisingType() == GapAdvertisingParams::ADV_NON_CONNECTABLE_UNDIRECTED) {
sjallouli 0:a948f5f3904c 241 /* Min delay is slightly longer for unconnectable devices */
sjallouli 0:a948f5f3904c 242 if ((params.getInterval() < GAP_ADV_PARAMS_INTERVAL_MIN_NONCON) ||
sjallouli 0:a948f5f3904c 243 (params.getInterval() > GAP_ADV_PARAMS_INTERVAL_MAX)) {
sjallouli 0:a948f5f3904c 244 return BLE_ERROR_PARAM_OUT_OF_RANGE;
sjallouli 0:a948f5f3904c 245 }
sjallouli 0:a948f5f3904c 246 } else {
sjallouli 0:a948f5f3904c 247 if ((params.getInterval() < GAP_ADV_PARAMS_INTERVAL_MIN) ||
sjallouli 0:a948f5f3904c 248 (params.getInterval() > GAP_ADV_PARAMS_INTERVAL_MAX)) {
sjallouli 0:a948f5f3904c 249 return BLE_ERROR_PARAM_OUT_OF_RANGE;
sjallouli 0:a948f5f3904c 250 }
sjallouli 0:a948f5f3904c 251 }
sjallouli 0:a948f5f3904c 252
sjallouli 0:a948f5f3904c 253 /* Check timeout is zero for Connectable Directed */
sjallouli 0:a948f5f3904c 254 if ((params.getAdvertisingType() == GapAdvertisingParams::ADV_CONNECTABLE_DIRECTED) && (params.getTimeout() != 0)) {
sjallouli 0:a948f5f3904c 255 /* Timeout must be 0 with this type, although we'll never get here */
sjallouli 0:a948f5f3904c 256 /* since this isn't implemented yet anyway */
sjallouli 0:a948f5f3904c 257 return BLE_ERROR_PARAM_OUT_OF_RANGE;
sjallouli 0:a948f5f3904c 258 }
sjallouli 0:a948f5f3904c 259
sjallouli 0:a948f5f3904c 260 /* Check timeout for other advertising types */
sjallouli 0:a948f5f3904c 261 if ((params.getAdvertisingType() != GapAdvertisingParams::ADV_CONNECTABLE_DIRECTED) &&
sjallouli 0:a948f5f3904c 262 (params.getTimeout() > GAP_ADV_PARAMS_TIMEOUT_MAX)) {
sjallouli 0:a948f5f3904c 263 return BLE_ERROR_PARAM_OUT_OF_RANGE;
sjallouli 0:a948f5f3904c 264 }
sjallouli 0:a948f5f3904c 265
sjallouli 0:a948f5f3904c 266 tBleStatus ret;
sjallouli 0:a948f5f3904c 267 const LongUUIDBytes_t HRM_SERVICE_UUID_128 = {0x18, 0x0D};
sjallouli 0:a948f5f3904c 268 /* set scan response data */
sjallouli 0:a948f5f3904c 269 hci_le_set_scan_resp_data(scan_rsp_length, scan_response_payload); /*int hci_le_set_scan_resp_data(uint8_t length, const uint8_t data[]);*/
sjallouli 0:a948f5f3904c 270
sjallouli 0:a948f5f3904c 271 /*aci_gap_set_discoverable(Advertising_Event_Type, Adv_min_intvl, Adv_Max_Intvl, Addr_Type, Adv_Filter_Policy,
sjallouli 0:a948f5f3904c 272 Local_Name_Length, local_name, service_uuid_length, service_uuid_list, Slave_conn_intvl_min, Slave_conn_intvl_max);*/
sjallouli 0:a948f5f3904c 273 /*LINK_LAYER.H DESCRIBES THE ADVERTISING TYPES*/
sjallouli 0:a948f5f3904c 274
sjallouli 0:a948f5f3904c 275 char* name = NULL;
sjallouli 0:a948f5f3904c 276 uint8_t nameLen = 0;
sjallouli 0:a948f5f3904c 277 if(local_name!=NULL) {
sjallouli 0:a948f5f3904c 278 name = (char*)local_name;
sjallouli 0:a948f5f3904c 279 DEBUG("name=%s\n\r", name);
sjallouli 0:a948f5f3904c 280 nameLen = local_name_length;
sjallouli 0:a948f5f3904c 281 } else {
sjallouli 0:a948f5f3904c 282 char str[] = "ST_BLE_DEV";
sjallouli 0:a948f5f3904c 283 name = new char[strlen(str)+1];
sjallouli 0:a948f5f3904c 284 name[0] = AD_TYPE_COMPLETE_LOCAL_NAME;
sjallouli 0:a948f5f3904c 285 strcpy(name+1, str);
sjallouli 0:a948f5f3904c 286 nameLen = strlen(name);
sjallouli 0:a948f5f3904c 287 DEBUG("nameLen=%d\n\r", nameLen);
sjallouli 0:a948f5f3904c 288 DEBUG("name=%s\n\r", name);
sjallouli 0:a948f5f3904c 289 }
sjallouli 0:a948f5f3904c 290
sjallouli 0:a948f5f3904c 291
sjallouli 0:a948f5f3904c 292 advtInterval = params.getInterval(); // set advtInterval in case it is not already set by user application
sjallouli 0:a948f5f3904c 293 ret = aci_gap_set_discoverable(params.getAdvertisingType(), // Advertising_Event_Type
sjallouli 0:a948f5f3904c 294 0, // Adv_Interval_Min
sjallouli 0:a948f5f3904c 295 advtInterval, // Adv_Interval_Max
sjallouli 0:a948f5f3904c 296 PUBLIC_ADDR, // Address_Type
sjallouli 0:a948f5f3904c 297 NO_WHITE_LIST_USE, // Adv_Filter_Policy
sjallouli 0:a948f5f3904c 298 nameLen, //local_name_length, // Local_Name_Length
sjallouli 0:a948f5f3904c 299 (const char*)name, //local_name, // Local_Name
sjallouli 0:a948f5f3904c 300 servUuidlength, //Service_Uuid_Length
sjallouli 0:a948f5f3904c 301 servUuidData, //Service_Uuid_List
sjallouli 0:a948f5f3904c 302 0, // Slave_Conn_Interval_Min
sjallouli 0:a948f5f3904c 303 0); // Slave_Conn_Interval_Max
sjallouli 0:a948f5f3904c 304
sjallouli 0:a948f5f3904c 305 state.advertising = 1;
sjallouli 0:a948f5f3904c 306
sjallouli 0:a948f5f3904c 307 return BLE_ERROR_NONE;
sjallouli 0:a948f5f3904c 308 }
sjallouli 0:a948f5f3904c 309
sjallouli 0:a948f5f3904c 310 /**************************************************************************/
sjallouli 0:a948f5f3904c 311 /*!
sjallouli 0:a948f5f3904c 312 @brief Stops the BLE HW and disconnects from any devices
sjallouli 0:a948f5f3904c 313
sjallouli 0:a948f5f3904c 314 @returns ble_error_t
sjallouli 0:a948f5f3904c 315
sjallouli 0:a948f5f3904c 316 @retval BLE_ERROR_NONE
sjallouli 0:a948f5f3904c 317 Everything executed properly
sjallouli 0:a948f5f3904c 318
sjallouli 0:a948f5f3904c 319 @section EXAMPLE
sjallouli 0:a948f5f3904c 320
sjallouli 0:a948f5f3904c 321 @code
sjallouli 0:a948f5f3904c 322
sjallouli 0:a948f5f3904c 323 @endcode
sjallouli 0:a948f5f3904c 324 */
sjallouli 0:a948f5f3904c 325 /**************************************************************************/
sjallouli 0:a948f5f3904c 326 ble_error_t BlueNRGGap::stopAdvertising(void)
sjallouli 0:a948f5f3904c 327 {
sjallouli 0:a948f5f3904c 328 tBleStatus ret;
sjallouli 0:a948f5f3904c 329
sjallouli 0:a948f5f3904c 330 if(state.advertising == 1) {
sjallouli 0:a948f5f3904c 331 //Set non-discoverable to stop advertising
sjallouli 0:a948f5f3904c 332 ret = aci_gap_set_non_discoverable();
sjallouli 0:a948f5f3904c 333
sjallouli 0:a948f5f3904c 334 if (ret != BLE_STATUS_SUCCESS){
sjallouli 0:a948f5f3904c 335 DEBUG("Error in stopping advertisement!!\n\r") ;
sjallouli 0:a948f5f3904c 336 return BLE_ERROR_PARAM_OUT_OF_RANGE ; //Not correct Error Value
sjallouli 0:a948f5f3904c 337 //FIXME: Define Error values equivalent to BlueNRG Error Codes.
sjallouli 0:a948f5f3904c 338 }
sjallouli 0:a948f5f3904c 339 DEBUG("Advertisement stopped!!\n\r") ;
sjallouli 0:a948f5f3904c 340 //Set GapState_t::advertising state
sjallouli 0:a948f5f3904c 341 state.advertising = 0;
sjallouli 0:a948f5f3904c 342 }
sjallouli 0:a948f5f3904c 343
sjallouli 0:a948f5f3904c 344 return BLE_ERROR_NONE;
sjallouli 0:a948f5f3904c 345 }
sjallouli 0:a948f5f3904c 346
sjallouli 0:a948f5f3904c 347 /**************************************************************************/
sjallouli 0:a948f5f3904c 348 /*!
sjallouli 0:a948f5f3904c 349 @brief Disconnects if we are connected to a central device
sjallouli 0:a948f5f3904c 350
sjallouli 0:a948f5f3904c 351 @returns ble_error_t
sjallouli 0:a948f5f3904c 352
sjallouli 0:a948f5f3904c 353 @retval BLE_ERROR_NONE
sjallouli 0:a948f5f3904c 354 Everything executed properly
sjallouli 0:a948f5f3904c 355
sjallouli 0:a948f5f3904c 356 @section EXAMPLE
sjallouli 0:a948f5f3904c 357
sjallouli 0:a948f5f3904c 358 @code
sjallouli 0:a948f5f3904c 359
sjallouli 0:a948f5f3904c 360 @endcode
sjallouli 0:a948f5f3904c 361 */
sjallouli 0:a948f5f3904c 362 /**************************************************************************/
sjallouli 0:a948f5f3904c 363 ble_error_t BlueNRGGap::disconnect(Gap::DisconnectionReason_t reason)
sjallouli 0:a948f5f3904c 364 {
sjallouli 0:a948f5f3904c 365 tBleStatus ret;
sjallouli 0:a948f5f3904c 366 //For Reason codes check BlueTooth HCI Spec
sjallouli 0:a948f5f3904c 367
sjallouli 0:a948f5f3904c 368 if(m_connectionHandle != BLE_CONN_HANDLE_INVALID) {
sjallouli 0:a948f5f3904c 369 ret = aci_gap_terminate(m_connectionHandle, 0x16);//0x16 Connection Terminated by Local Host.
sjallouli 0:a948f5f3904c 370
sjallouli 0:a948f5f3904c 371 if (ret != BLE_STATUS_SUCCESS){
sjallouli 0:a948f5f3904c 372 DEBUG("Error in GAP termination!!\n\r") ;
sjallouli 0:a948f5f3904c 373 return BLE_ERROR_PARAM_OUT_OF_RANGE ; //Not correct Error Value
sjallouli 0:a948f5f3904c 374 //FIXME: Define Error values equivalent to BlueNRG Error Codes.
sjallouli 0:a948f5f3904c 375 }
sjallouli 0:a948f5f3904c 376
sjallouli 0:a948f5f3904c 377 //DEBUG("Disconnected from localhost!!\n\r") ;
sjallouli 0:a948f5f3904c 378 m_connectionHandle = BLE_CONN_HANDLE_INVALID;
sjallouli 0:a948f5f3904c 379 }
sjallouli 0:a948f5f3904c 380
sjallouli 0:a948f5f3904c 381 return BLE_ERROR_NONE;
sjallouli 0:a948f5f3904c 382 }
sjallouli 0:a948f5f3904c 383
sjallouli 0:a948f5f3904c 384 /**************************************************************************/
sjallouli 0:a948f5f3904c 385 /*!
sjallouli 0:a948f5f3904c 386 @brief Sets the 16-bit connection handle
sjallouli 0:a948f5f3904c 387 */
sjallouli 0:a948f5f3904c 388 /**************************************************************************/
sjallouli 0:a948f5f3904c 389 void BlueNRGGap::setConnectionHandle(uint16_t con_handle)
sjallouli 0:a948f5f3904c 390 {
sjallouli 0:a948f5f3904c 391 m_connectionHandle = con_handle;
sjallouli 0:a948f5f3904c 392 }
sjallouli 0:a948f5f3904c 393
sjallouli 0:a948f5f3904c 394 /**************************************************************************/
sjallouli 0:a948f5f3904c 395 /*!
sjallouli 0:a948f5f3904c 396 @brief Gets the 16-bit connection handle
sjallouli 0:a948f5f3904c 397 */
sjallouli 0:a948f5f3904c 398 /**************************************************************************/
sjallouli 0:a948f5f3904c 399 uint16_t BlueNRGGap::getConnectionHandle(void)
sjallouli 0:a948f5f3904c 400 {
sjallouli 0:a948f5f3904c 401 return m_connectionHandle;
sjallouli 0:a948f5f3904c 402 }
sjallouli 0:a948f5f3904c 403
sjallouli 0:a948f5f3904c 404 /**************************************************************************/
sjallouli 0:a948f5f3904c 405 /*!
sjallouli 0:a948f5f3904c 406 @brief Sets the BLE device address. SetAddress will reset the BLE
sjallouli 0:a948f5f3904c 407 device and re-initialize BTLE. Will not start advertising.
sjallouli 0:a948f5f3904c 408
sjallouli 0:a948f5f3904c 409 @returns ble_error_t
sjallouli 0:a948f5f3904c 410
sjallouli 0:a948f5f3904c 411 @section EXAMPLE
sjallouli 0:a948f5f3904c 412
sjallouli 0:a948f5f3904c 413 @code
sjallouli 0:a948f5f3904c 414
sjallouli 0:a948f5f3904c 415 @endcode
sjallouli 0:a948f5f3904c 416 */
sjallouli 0:a948f5f3904c 417 /**************************************************************************/
sjallouli 0:a948f5f3904c 418 ble_error_t BlueNRGGap::setAddress(addr_type_t type, const uint8_t address[6])
sjallouli 0:a948f5f3904c 419 {
sjallouli 0:a948f5f3904c 420 tBleStatus ret;
sjallouli 0:a948f5f3904c 421
sjallouli 0:a948f5f3904c 422 if (type > ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE) {
sjallouli 0:a948f5f3904c 423 return BLE_ERROR_PARAM_OUT_OF_RANGE;
sjallouli 0:a948f5f3904c 424 }
sjallouli 0:a948f5f3904c 425
sjallouli 0:a948f5f3904c 426 //copy address to bdAddr[6]
sjallouli 0:a948f5f3904c 427 for(int i=0; i<BDADDR_SIZE; i++) {
sjallouli 0:a948f5f3904c 428 bdaddr[i] = address[i];
sjallouli 0:a948f5f3904c 429 //DEBUG("i[%d]:0x%x\n\r",i,bdaddr[i]);
sjallouli 0:a948f5f3904c 430 }
sjallouli 0:a948f5f3904c 431
sjallouli 0:a948f5f3904c 432 if(!isSetAddress) isSetAddress = true;
sjallouli 0:a948f5f3904c 433
sjallouli 0:a948f5f3904c 434 //Re-Init the BTLE Device with SetAddress as true
sjallouli 0:a948f5f3904c 435 //if(BlueNRGDevice::getIsInitialized())//Re-init only initialization is already done
sjallouli 0:a948f5f3904c 436 btle_init(isSetAddress);
sjallouli 0:a948f5f3904c 437
sjallouli 0:a948f5f3904c 438 //if (ret==BLE_STATUS_SUCCESS)
sjallouli 0:a948f5f3904c 439 return BLE_ERROR_NONE;
sjallouli 0:a948f5f3904c 440 }
sjallouli 0:a948f5f3904c 441
sjallouli 0:a948f5f3904c 442 /**************************************************************************/
sjallouli 0:a948f5f3904c 443 /*!
sjallouli 0:a948f5f3904c 444 @brief Returns boolean if the address of the device has been set
sjallouli 0:a948f5f3904c 445 or not
sjallouli 0:a948f5f3904c 446
sjallouli 0:a948f5f3904c 447 @returns bool
sjallouli 0:a948f5f3904c 448
sjallouli 0:a948f5f3904c 449 @section EXAMPLE
sjallouli 0:a948f5f3904c 450
sjallouli 0:a948f5f3904c 451 @code
sjallouli 0:a948f5f3904c 452
sjallouli 0:a948f5f3904c 453 @endcode
sjallouli 0:a948f5f3904c 454 */
sjallouli 0:a948f5f3904c 455 /**************************************************************************/
sjallouli 0:a948f5f3904c 456 bool BlueNRGGap::getIsSetAddress()
sjallouli 0:a948f5f3904c 457 {
sjallouli 0:a948f5f3904c 458 return isSetAddress;
sjallouli 0:a948f5f3904c 459 }
sjallouli 0:a948f5f3904c 460
sjallouli 0:a948f5f3904c 461 /**************************************************************************/
sjallouli 0:a948f5f3904c 462 /*!
sjallouli 0:a948f5f3904c 463 @brief Returns the address of the device if set
sjallouli 0:a948f5f3904c 464
sjallouli 0:a948f5f3904c 465 @returns ble_error_t
sjallouli 0:a948f5f3904c 466
sjallouli 0:a948f5f3904c 467 @section EXAMPLE
sjallouli 0:a948f5f3904c 468
sjallouli 0:a948f5f3904c 469 @code
sjallouli 0:a948f5f3904c 470
sjallouli 0:a948f5f3904c 471 @endcode
sjallouli 0:a948f5f3904c 472 */
sjallouli 0:a948f5f3904c 473 /**************************************************************************/
sjallouli 0:a948f5f3904c 474 tHalUint8* BlueNRGGap::getAddress()
sjallouli 0:a948f5f3904c 475 {
sjallouli 0:a948f5f3904c 476 if(isSetAddress)
sjallouli 0:a948f5f3904c 477 return bdaddr;
sjallouli 0:a948f5f3904c 478 else return NULL;
sjallouli 0:a948f5f3904c 479 }
sjallouli 0:a948f5f3904c 480
sjallouli 0:a948f5f3904c 481 /**************************************************************************/
sjallouli 0:a948f5f3904c 482 /*!
sjallouli 0:a948f5f3904c 483 @brief obtains preferred connection params
sjallouli 0:a948f5f3904c 484
sjallouli 0:a948f5f3904c 485 @returns ble_error_t
sjallouli 0:a948f5f3904c 486
sjallouli 0:a948f5f3904c 487 @section EXAMPLE
sjallouli 0:a948f5f3904c 488
sjallouli 0:a948f5f3904c 489 @code
sjallouli 0:a948f5f3904c 490
sjallouli 0:a948f5f3904c 491 @endcode
sjallouli 0:a948f5f3904c 492 */
sjallouli 0:a948f5f3904c 493 /**************************************************************************/
sjallouli 0:a948f5f3904c 494 ble_error_t BlueNRGGap::getPreferredConnectionParams(ConnectionParams_t *params)
sjallouli 0:a948f5f3904c 495 {
sjallouli 0:a948f5f3904c 496 return BLE_ERROR_NONE;
sjallouli 0:a948f5f3904c 497 }
sjallouli 0:a948f5f3904c 498
sjallouli 0:a948f5f3904c 499
sjallouli 0:a948f5f3904c 500 /**************************************************************************/
sjallouli 0:a948f5f3904c 501 /*!
sjallouli 0:a948f5f3904c 502 @brief sets preferred connection params
sjallouli 0:a948f5f3904c 503
sjallouli 0:a948f5f3904c 504 @returns ble_error_t
sjallouli 0:a948f5f3904c 505
sjallouli 0:a948f5f3904c 506 @section EXAMPLE
sjallouli 0:a948f5f3904c 507
sjallouli 0:a948f5f3904c 508 @code
sjallouli 0:a948f5f3904c 509
sjallouli 0:a948f5f3904c 510 @endcode
sjallouli 0:a948f5f3904c 511 */
sjallouli 0:a948f5f3904c 512 /**************************************************************************/
sjallouli 0:a948f5f3904c 513 ble_error_t BlueNRGGap::setPreferredConnectionParams(const ConnectionParams_t *params)
sjallouli 0:a948f5f3904c 514 {
sjallouli 0:a948f5f3904c 515 return BLE_ERROR_NONE;
sjallouli 0:a948f5f3904c 516 }
sjallouli 0:a948f5f3904c 517
sjallouli 0:a948f5f3904c 518 /**************************************************************************/
sjallouli 0:a948f5f3904c 519 /*!
sjallouli 0:a948f5f3904c 520 @brief updates preferred connection params
sjallouli 0:a948f5f3904c 521
sjallouli 0:a948f5f3904c 522 @returns ble_error_t
sjallouli 0:a948f5f3904c 523
sjallouli 0:a948f5f3904c 524 @section EXAMPLE
sjallouli 0:a948f5f3904c 525
sjallouli 0:a948f5f3904c 526 @code
sjallouli 0:a948f5f3904c 527
sjallouli 0:a948f5f3904c 528 @endcode
sjallouli 0:a948f5f3904c 529 */
sjallouli 0:a948f5f3904c 530 /**************************************************************************/
sjallouli 0:a948f5f3904c 531 ble_error_t BlueNRGGap::updateConnectionParams(Handle_t handle, const ConnectionParams_t *params)
sjallouli 0:a948f5f3904c 532 {
sjallouli 0:a948f5f3904c 533 return BLE_ERROR_NONE;
sjallouli 0:a948f5f3904c 534 }
sjallouli 0:a948f5f3904c 535
sjallouli 0:a948f5f3904c 536 /**************************************************************************/
sjallouli 0:a948f5f3904c 537 /*!
sjallouli 0:a948f5f3904c 538 @brief sets device name characteristic
sjallouli 0:a948f5f3904c 539
sjallouli 0:a948f5f3904c 540 @param[in] deviceName
sjallouli 0:a948f5f3904c 541 pointer to device name to be set
sjallouli 0:a948f5f3904c 542
sjallouli 0:a948f5f3904c 543 @returns ble_error_t
sjallouli 0:a948f5f3904c 544
sjallouli 0:a948f5f3904c 545 @retval BLE_ERROR_NONE
sjallouli 0:a948f5f3904c 546 Everything executed properly
sjallouli 0:a948f5f3904c 547
sjallouli 0:a948f5f3904c 548 @section EXAMPLE
sjallouli 0:a948f5f3904c 549
sjallouli 0:a948f5f3904c 550 @code
sjallouli 0:a948f5f3904c 551
sjallouli 0:a948f5f3904c 552 @endcode
sjallouli 0:a948f5f3904c 553 */
sjallouli 0:a948f5f3904c 554 /**************************************************************************/
sjallouli 0:a948f5f3904c 555 ble_error_t BlueNRGGap::setDeviceName(const uint8_t *deviceName)
sjallouli 0:a948f5f3904c 556 {
sjallouli 0:a948f5f3904c 557 int ret;
sjallouli 0:a948f5f3904c 558 uint8_t nameLen = 0;
sjallouli 0:a948f5f3904c 559
sjallouli 0:a948f5f3904c 560 DeviceName = (uint8_t *)deviceName;
sjallouli 0:a948f5f3904c 561 //DEBUG("SetDeviceName=%s\n\r", DeviceName);
sjallouli 0:a948f5f3904c 562
sjallouli 0:a948f5f3904c 563 nameLen = strlen((const char*)DeviceName);
sjallouli 0:a948f5f3904c 564 //DEBUG("DeviceName Size=%d\n\r", nameLen);
sjallouli 0:a948f5f3904c 565
sjallouli 0:a948f5f3904c 566 ret = aci_gatt_update_char_value(g_gap_service_handle,
sjallouli 0:a948f5f3904c 567 g_device_name_char_handle,
sjallouli 0:a948f5f3904c 568 0,
sjallouli 0:a948f5f3904c 569 nameLen,
sjallouli 0:a948f5f3904c 570 (tHalUint8 *)DeviceName);
sjallouli 0:a948f5f3904c 571
sjallouli 0:a948f5f3904c 572 if(ret){
sjallouli 0:a948f5f3904c 573 DEBUG("device set name failed\n\r");
sjallouli 0:a948f5f3904c 574 return BLE_ERROR_PARAM_OUT_OF_RANGE;//TODO:Wrong error code
sjallouli 0:a948f5f3904c 575 }
sjallouli 0:a948f5f3904c 576
sjallouli 0:a948f5f3904c 577 return BLE_ERROR_NONE;
sjallouli 0:a948f5f3904c 578 }
sjallouli 0:a948f5f3904c 579
sjallouli 0:a948f5f3904c 580 /**************************************************************************/
sjallouli 0:a948f5f3904c 581 /*!
sjallouli 0:a948f5f3904c 582 @brief gets device name characteristic
sjallouli 0:a948f5f3904c 583
sjallouli 0:a948f5f3904c 584 @param[in] deviceName
sjallouli 0:a948f5f3904c 585 pointer to device name
sjallouli 0:a948f5f3904c 586
sjallouli 0:a948f5f3904c 587
sjallouli 0:a948f5f3904c 588 @param[in] lengthP
sjallouli 0:a948f5f3904c 589 pointer to device name length
sjallouli 0:a948f5f3904c 590
sjallouli 0:a948f5f3904c 591 @returns ble_error_t
sjallouli 0:a948f5f3904c 592
sjallouli 0:a948f5f3904c 593 @retval BLE_ERROR_NONE
sjallouli 0:a948f5f3904c 594 Everything executed properly
sjallouli 0:a948f5f3904c 595
sjallouli 0:a948f5f3904c 596 @section EXAMPLE
sjallouli 0:a948f5f3904c 597
sjallouli 0:a948f5f3904c 598 @code
sjallouli 0:a948f5f3904c 599
sjallouli 0:a948f5f3904c 600 @endcode
sjallouli 0:a948f5f3904c 601 */
sjallouli 0:a948f5f3904c 602 /**************************************************************************/
sjallouli 0:a948f5f3904c 603 ble_error_t BlueNRGGap::getDeviceName(uint8_t *deviceName, unsigned *lengthP)
sjallouli 0:a948f5f3904c 604 {
sjallouli 0:a948f5f3904c 605 int ret;
sjallouli 0:a948f5f3904c 606
sjallouli 0:a948f5f3904c 607 if(DeviceName==NULL)
sjallouli 0:a948f5f3904c 608 return BLE_ERROR_PARAM_OUT_OF_RANGE;
sjallouli 0:a948f5f3904c 609
sjallouli 0:a948f5f3904c 610 strcpy((char*)deviceName, (const char*)DeviceName);
sjallouli 0:a948f5f3904c 611 //DEBUG("GetDeviceName=%s\n\r", deviceName);
sjallouli 0:a948f5f3904c 612
sjallouli 0:a948f5f3904c 613 *lengthP = strlen((const char*)DeviceName);
sjallouli 0:a948f5f3904c 614 //DEBUG("DeviceName Size=%d\n\r", *lengthP);
sjallouli 0:a948f5f3904c 615
sjallouli 0:a948f5f3904c 616 return BLE_ERROR_NONE;
sjallouli 0:a948f5f3904c 617 }
sjallouli 0:a948f5f3904c 618
sjallouli 0:a948f5f3904c 619 /**************************************************************************/
sjallouli 0:a948f5f3904c 620 /*!
sjallouli 0:a948f5f3904c 621 @brief sets device appearance characteristic
sjallouli 0:a948f5f3904c 622
sjallouli 0:a948f5f3904c 623 @param[in] appearance
sjallouli 0:a948f5f3904c 624 device appearance
sjallouli 0:a948f5f3904c 625
sjallouli 0:a948f5f3904c 626 @returns ble_error_t
sjallouli 0:a948f5f3904c 627
sjallouli 0:a948f5f3904c 628 @retval BLE_ERROR_NONE
sjallouli 0:a948f5f3904c 629 Everything executed properly
sjallouli 0:a948f5f3904c 630
sjallouli 0:a948f5f3904c 631 @section EXAMPLE
sjallouli 0:a948f5f3904c 632
sjallouli 0:a948f5f3904c 633 @code
sjallouli 0:a948f5f3904c 634
sjallouli 0:a948f5f3904c 635 @endcode
sjallouli 0:a948f5f3904c 636 */
sjallouli 0:a948f5f3904c 637 /**************************************************************************/
sjallouli 0:a948f5f3904c 638 ble_error_t BlueNRGGap::setAppearance(uint16_t appearance)
sjallouli 0:a948f5f3904c 639 {
sjallouli 0:a948f5f3904c 640 /*
sjallouli 0:a948f5f3904c 641 Tested with GapAdvertisingData::GENERIC_PHONE.
sjallouli 0:a948f5f3904c 642 for other appearances BLE Scanner android app is not behaving properly
sjallouli 0:a948f5f3904c 643 */
sjallouli 0:a948f5f3904c 644 //char deviceAppearance[2];
sjallouli 0:a948f5f3904c 645 STORE_LE_16(deviceAppearance, appearance);
sjallouli 0:a948f5f3904c 646 DEBUG("input: incoming = %d deviceAppearance= 0x%x 0x%x\n\r", appearance, deviceAppearance[1], deviceAppearance[0]);
sjallouli 0:a948f5f3904c 647
sjallouli 0:a948f5f3904c 648 aci_gatt_update_char_value(g_gap_service_handle, g_appearance_char_handle, 0, 2, (tHalUint8 *)deviceAppearance);
sjallouli 0:a948f5f3904c 649
sjallouli 0:a948f5f3904c 650 return BLE_ERROR_NONE;
sjallouli 0:a948f5f3904c 651 }
sjallouli 0:a948f5f3904c 652
sjallouli 0:a948f5f3904c 653 /**************************************************************************/
sjallouli 0:a948f5f3904c 654 /*!
sjallouli 0:a948f5f3904c 655 @brief gets device appearance
sjallouli 0:a948f5f3904c 656
sjallouli 0:a948f5f3904c 657 @param[in] appearance
sjallouli 0:a948f5f3904c 658 pointer to device appearance value
sjallouli 0:a948f5f3904c 659
sjallouli 0:a948f5f3904c 660 @returns ble_error_t
sjallouli 0:a948f5f3904c 661
sjallouli 0:a948f5f3904c 662 @retval BLE_ERROR_NONE
sjallouli 0:a948f5f3904c 663 Everything executed properly
sjallouli 0:a948f5f3904c 664
sjallouli 0:a948f5f3904c 665 @section EXAMPLE
sjallouli 0:a948f5f3904c 666
sjallouli 0:a948f5f3904c 667 @code
sjallouli 0:a948f5f3904c 668
sjallouli 0:a948f5f3904c 669 @endcode
sjallouli 0:a948f5f3904c 670 */
sjallouli 0:a948f5f3904c 671 /**************************************************************************/
sjallouli 0:a948f5f3904c 672 ble_error_t BlueNRGGap::getAppearance(uint16_t *appearanceP)
sjallouli 0:a948f5f3904c 673 {
sjallouli 0:a948f5f3904c 674 uint16_t devP;
sjallouli 0:a948f5f3904c 675 if(!appearanceP) return BLE_ERROR_PARAM_OUT_OF_RANGE;
sjallouli 0:a948f5f3904c 676 devP = ((uint16_t)(0x0000|deviceAppearance[0])) | (((uint16_t)(0x0000|deviceAppearance[1]))<<8);
sjallouli 0:a948f5f3904c 677 strcpy((char*)appearanceP, (const char*)&devP);
sjallouli 0:a948f5f3904c 678
sjallouli 0:a948f5f3904c 679 return BLE_ERROR_NONE;
sjallouli 0:a948f5f3904c 680 }