Diff: targets/TARGET_ONSEMI/TARGET_NCS36510/rtc.c

Revision:

167:e84263d55307

Parent:

150:02e0a0aed4ec

Child:

174:b96e65c34a4d

diff -r c97ed07ec1a8 -r e84263d55307 targets/TARGET_ONSEMI/TARGET_NCS36510/rtc.c
--- a/targets/TARGET_ONSEMI/TARGET_NCS36510/rtc.c	Thu Jun 08 15:02:37 2017 +0100
+++ b/targets/TARGET_ONSEMI/TARGET_NCS36510/rtc.c	Wed Jun 21 17:46:44 2017 +0100
@@ -7,11 +7,11 @@
  * $Rev: 3525 $
  * $Date: 2015-07-20 15:24:25 +0530 (Mon, 20 Jul 2015) $
  ******************************************************************************
- * Copyright 2016 Semiconductor Components Industries LLC (d/b/a “ON Semiconductor”).
+ * Copyright 2016 Semiconductor Components Industries LLC (d/b/a �ON Semiconductor�).
  * All rights reserved.  This software and/or documentation is licensed by ON Semiconductor
  * under limited terms and conditions.  The terms and conditions pertaining to the software
  * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf
- * (“ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software”) and
+ * (�ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software�) and
  * if applicable the software license agreement.  Do not use this software and/or
  * documentation unless you have carefully read and you agree to the limited terms and
  * conditions.  By using this software and/or documentation, you agree to the limited
@@ -45,8 +45,25 @@
 #include "mbed_assert.h"
 #include "lp_ticker_api.h"
 
-static uint16_t SubSecond;
-static uint64_t LastRtcTimeus;
+static volatile uint64_t last_time_read;
+
+/**
+ * Convert sub seconds ticks to micro seconds.
+ * The clock running at 32kHz, a tick is 1/32768 of a second.
+ */
+static inline uint32_t ticks_to_us(uint16_t ticks) {
+	return (((uint64_t)ticks * RTC_SEC_TO_US) / RTC_CLOCK_HZ);
+}
+
+/**
+ * Convert us into sub seconds ticks.
+ * @note result might be troncated to be in the range [0 - RTC_SUB_SEC_MASK].
+ */
+static inline uint16_t us_to_ticks(uint32_t us) {
+	return (((uint64_t) us * RTC_CLOCK_HZ) / RTC_SEC_TO_US) & RTC_SUB_SEC_MASK;
+}
+
+#define RTC_TICK_THRESHOLD 5 
 
 /* See rtc.h for details */
 void fRtcInit(void)
@@ -55,115 +72,131 @@
     CLOCKREG->CCR.BITS.RTCEN = True;     /* Enable RTC clock 32K */
 
     /* Reset RTC control register */
-    RTCREG->CONTROL.WORD     = False;
+    RTCREG->CONTROL.WORD = 0;
 
     /* Initialize all counters */
-    RTCREG->SECOND_COUNTER       = False;
-    RTCREG->SUB_SECOND_COUNTER   = False;
-    RTCREG->SECOND_ALARM         = False;
-    RTCREG->SUB_SECOND_ALARM     = False;
-    LastRtcTimeus = 0;
+    RTCREG->SECOND_COUNTER = 0;
+    RTCREG->SUB_SECOND_COUNTER = 0;
+    RTCREG->SECOND_ALARM = 0;
+    RTCREG->SUB_SECOND_ALARM = 0;
+    last_time_read = 0;
 
     /* Reset RTC Status register */
-    RTCREG->STATUS.WORD      = False;
+    RTCREG->STATUS.WORD = 0;
 
     /* Clear interrupt status */
-    RTCREG->INT_CLEAR.WORD   = False;
+    RTCREG->INT_CLEAR.WORD = (
+        (1 << RTC_INT_CLR_SUB_SEC_BIT_POS) | 
+        (1 << RTC_INT_CLR_SEC_BIT_POS)
+    );
 
+    /* Wait previous write to complete */
+    while(RTCREG->STATUS.BITS.BSY_CTRL_REG_WRT == True);
     /* Start sec & sub_sec counter */
-    while(RTCREG->STATUS.BITS.BSY_CTRL_REG_WRT == True);/* Wait previous write to complete */
-    RTCREG->CONTROL.WORD |= ((True << RTC_CONTROL_SUBSEC_CNT_START_BIT_POS) |
-                             (True << RTC_CONTROL_SEC_CNT_START_BIT_POS));
+    RTCREG->CONTROL.WORD |= (
+        (True << RTC_CONTROL_SUBSEC_CNT_START_BIT_POS) |
+        (True << RTC_CONTROL_SEC_CNT_START_BIT_POS)
+    );
 
     /* enable interruption associated with the rtc at NVIC level */
-    NVIC_SetVector(Rtc_IRQn,(uint32_t)fRtcHandler); /* TODO define lp_ticker_isr */
+    NVIC_SetVector(Rtc_IRQn,(uint32_t) fRtcHandler); /* TODO define lp_ticker_isr */
     NVIC_ClearPendingIRQ(Rtc_IRQn);
     NVIC_EnableIRQ(Rtc_IRQn);
 
-    while(RTCREG->STATUS.BITS.BSY_CTRL_REG_WRT == True); /* Wait for RTC to finish writing register - RTC operates on 32K clock as compared to 32M core*/
-
-    return;
+    /* Wait for RTC to finish writing register */
+    while(RTCREG->STATUS.BITS.BSY_CTRL_REG_WRT == True);
 }
 
 /* See rtc.h for details */
 void fRtcFree(void)
 {
-    /* Reset RTC control register */
-    RTCREG->CONTROL.WORD = False;
+    /* Disable interrupts and counter */
+    RTCREG->CONTROL.WORD = 0;
 
     /* disable interruption associated with the rtc */
     NVIC_DisableIRQ(Rtc_IRQn);
 
-    while(RTCREG->STATUS.BITS.BSY_CTRL_REG_WRT == True); /* Wait for RTC to finish writing register - RTC operates on 32K clock as compared to 32M core*/
+    /* Wait for RTC to finish writing register */
+    while(RTCREG->STATUS.BITS.BSY_CTRL_REG_WRT == True);
 }
 
 /* See rtc.h for details */
 void fRtcSetInterrupt(uint32_t timestamp)
 {
-    SubSecond             = False;
-    uint32_t Second = False, EnableInterrupt = False;
-    uint8_t DividerAdjust = 1;
-
-    if(timestamp) {
-        if(timestamp >= RTC_SEC_TO_US) {
-            /* TimeStamp is big enough to set second alarm */
-            Second =  ((timestamp / RTC_SEC_TO_US) & RTC_SEC_MASK); /* Convert micro second to second */
-            RTCREG->SECOND_ALARM = Second; /* Write to alarm register */
+	uint64_t current_time = fRtcRead();
 
-            /* Enable second interrupt */
-              EnableInterrupt = True << RTC_CONTROL_SEC_CNT_INT_BIT_POS;
-        }
-        timestamp = timestamp - Second * RTC_SEC_TO_US; /* Take out micro second for sub second alarm */
-        if(timestamp > False) {
-            /* We have some thing for sub second */
+	/* compute delta between current time and timestamp.
+	 * Note: the current time used to compute the delta is relative (truncated 
+     * to 32 bits).
+	 */
+	int32_t delta = timestamp - (uint32_t) current_time;
+	if (delta <= 0) {
+		// event considered in the past, set the interrupt as pending.
+		NVIC_SetPendingIRQ(Rtc_IRQn);
+		return;
+	}
 
-            /* Convert micro second to sub_seconds(each count = 30.5 us) */
-            if(timestamp > 131000) {
-                DividerAdjust = 100;
-            }
+	uint64_t full_timestamp = (current_time & ~UINT32_MAX) | timestamp;
+	if ( (uint32_t)current_time > timestamp) {
+		full_timestamp += ((uint64_t) UINT32_MAX) + 1;
+	}
 
-            volatile uint64_t Temp = (timestamp / DividerAdjust * RTC_CLOCK_HZ);
-            Temp = (uint64_t)(Temp / RTC_SEC_TO_US * DividerAdjust);
-            SubSecond = Temp & RTC_SUB_SEC_MASK;
+	uint32_t target_seconds = full_timestamp / RTC_SEC_TO_US;
+	uint16_t target_ticks = us_to_ticks(full_timestamp);
 
-            if(SubSecond <= 5) {
-                SubSecond = 0;
-            }
-
-            if(SubSecond > False) {
-                /* Second interrupt not enabled */
-
-                /* Set SUB SEC_ALARM */
-                RTCREG->SUB_SECOND_ALARM = SubSecond;    /* Write to sub second alarm */
+	/*
+	 * If the interrupt is in more than one second from now then use the
+	 * second alarm, otherwise use the subsecond alarm.
+	 * In case of the second alarm is used, there is no need to preserve the
+	 * remaining subsecond because the irq handler should manage spurious
+	 * interrupts (like when the timestamp is in the past). In such case, irq
+	 * handler will schedule a new interrupt with the remaining us.
+	 */
+	NVIC_DisableIRQ(Rtc_IRQn);
+	if (target_seconds != RTCREG->SECOND_COUNTER) {
+		RTCREG->SECOND_ALARM = target_seconds;
 
-                /* Enable sub second interrupt */
-                EnableInterrupt |= (True << RTC_CONTROL_SUBSEC_CNT_INT_BIT_POS);
-            }
-        }
-        
-        RTCREG->CONTROL.WORD |= EnableInterrupt;
-        /* Enable RTC interrupt */
-        NVIC_EnableIRQ(Rtc_IRQn);
-        
-        /* Wait for RTC to finish writing register - RTC operates on 32K clock as compared to 32M core*/
-        while((RTCREG->STATUS.WORD & ((True << RTC_STATUS_SUB_SEC_ALARM_WRT_BIT_POS) |
-                                      (True << RTC_STATUS_SEC_ALARM_WRT_BIT_POS) |
-                                      (True << RTC_STATUS_CONTROL_WRT_BIT_POS))) == True); 
-    }
-    return;
+		uint32_t rtc_control = RTCREG->CONTROL.WORD;
+		rtc_control |= (1 << RTC_CONTROL_SEC_CNT_INT_BIT_POS); // enable seconds interrupt
+		rtc_control &= ~(1 << RTC_CONTROL_SUBSEC_CNT_INT_BIT_POS); // disable sub sec interrupt
+		RTCREG->CONTROL.WORD = rtc_control;
+	} else {
+		uint16_t current_ticks = RTCREG->SUB_SECOND_COUNTER;
+		if (current_ticks == target_ticks ||
+			((target_ticks > current_ticks) && ((target_ticks - current_ticks) < RTC_TICK_THRESHOLD)) ||
+			((target_ticks < current_ticks) && ((RTC_SUB_SEC_MASK - (current_ticks - target_ticks)) < RTC_TICK_THRESHOLD))) {
+			// target ticks too close; schedule the interrupt immediately
+			NVIC_SetPendingIRQ(Rtc_IRQn);
+		} else {
+			RTCREG->SUB_SECOND_ALARM = target_ticks;
+
+			uint32_t rtc_control = RTCREG->CONTROL.WORD;
+			rtc_control &= ~(1 << RTC_CONTROL_SEC_CNT_INT_BIT_POS); // disable seconds interrupt
+			rtc_control |= (1 << RTC_CONTROL_SUBSEC_CNT_INT_BIT_POS); // enable sub sec interrupt
+			RTCREG->CONTROL.WORD = rtc_control;
+		}
+	}
+	 NVIC_EnableIRQ(Rtc_IRQn);
+
+     /* Wait for RTC to finish writing register - RTC operates on 32K clock as compared to 32M core*/
+     while(RTCREG->STATUS.WORD &
+        (
+        	(True << RTC_STATUS_SUB_SEC_ALARM_WRT_BIT_POS) |
+			(True << RTC_STATUS_SEC_ALARM_WRT_BIT_POS) |
+			(True << RTC_STATUS_CONTROL_WRT_BIT_POS)
+		)
+	);
 }
 
 /* See rtc.h for details */
 void fRtcDisableInterrupt(void)
 {
-    /* Disable RTC interrupt */
     NVIC_DisableIRQ(Rtc_IRQn);
 }
 
 /* See rtc.h for details */
 void fRtcEnableInterrupt(void)
 {
-    /* Enable RTC interrupt */
     NVIC_EnableIRQ(Rtc_IRQn);
 }
 
@@ -176,39 +209,36 @@
                               (True << RTC_INT_CLR_SEC_BIT_POS));
     
     while((RTCREG->STATUS.WORD & ((True << RTC_STATUS_SUB_SEC_INT_CLR_WRT_BIT_POS) |
-                                  (True << RTC_STATUS_SEC_INT_CLR_WRT_BIT_POS))) == True);  /* Wait for RTC to finish writing register - RTC operates on 32K clock as compared to 32M core*/
+                                  (True << RTC_STATUS_SEC_INT_CLR_WRT_BIT_POS))));  /* Wait for RTC to finish writing register - RTC operates on 32K clock as compared to 32M core*/
 }
 
 /* See rtc.h for details */
 uint64_t fRtcRead(void)
 {
-    uint32_t Second;
-    uint16_t SubSecond;
-
     /* Hardware Bug fix: The rollover of the sub-second counter initiates the increment of the second counter.
      * That means there is one cycle where the sub-second has rolled back to zero and the second counter has not incremented
      * and a read during that cycle will be incorrect.  That will occur for one RTC cycle and that is about 31us of exposure.
      * If you read a zero in the sub-second counter then increment the second counter by 1.
      * Alternatively, subtract 1 from the Sub-seconds counter to align the Second and Sub-Second rollover.
      */
-
-    /* Read the Second and Sub-second counters, then read the Second counter again.
-     * If it changed, then the Second rolled over while reading Sub-seconds, so go back and read them both again.
-     */
+	uint32_t seconds = RTCREG->SECOND_COUNTER;
+    uint16_t ticks = (RTCREG->SUB_SECOND_COUNTER - 1) & SUB_SEC_MASK;
 
-    do {
-        Second    = RTCREG->SECOND_COUNTER;                            /* Get SEC_COUNTER reg value */
-        SubSecond = (RTCREG->SUB_SECOND_COUNTER - 1) & SUB_SEC_MASK;   /* Get SUB_SEC_COUNTER reg value */
-    } while (Second != RTCREG->SECOND_COUNTER);                        /* Repeat if the second has changed */
+    /*
+     * If seconds has changed while reading ticks, read them both again.
+     */
+    while (seconds != RTCREG->SECOND_COUNTER) {
+        seconds = RTCREG->SECOND_COUNTER;
+        ticks = (RTCREG->SUB_SECOND_COUNTER - 1) & SUB_SEC_MASK;
+    }
 
-    //note: casting to float removed to avoid reduction in resolution
-    uint64_t RtcTimeus = ((uint64_t)SubSecond * RTC_SEC_TO_US / RTC_CLOCK_HZ) + ((uint64_t)Second * RTC_SEC_TO_US);
+    uint64_t current_time = ((uint64_t) seconds *  RTC_SEC_TO_US) + ticks_to_us(ticks);
 
     /*check that the time did not go backwards */
-    MBED_ASSERT(RtcTimeus >= LastRtcTimeus);
-    LastRtcTimeus = RtcTimeus;
+	MBED_ASSERT(current_time >= last_time_read);
+    last_time_read = current_time;
 
-    return RtcTimeus;
+    return current_time;
 }
 
 /* See rtc.h for details */
@@ -244,43 +274,31 @@
 /* See rtc.h for details */
 void fRtcHandler(void)
 {
-    /* SUB_SECOND/SECOND interrupt occured */
-    volatile uint32_t TempStatus = RTCREG->STATUS.WORD;
-
     /* Disable RTC interrupt */
     NVIC_DisableIRQ(Rtc_IRQn);
 
     /* Clear sec & sub_sec interrupts */
-    RTCREG->INT_CLEAR.WORD = ((True << RTC_INT_CLR_SUB_SEC_BIT_POS) |
-                              (True << RTC_INT_CLR_SEC_BIT_POS));
+    RTCREG->INT_CLEAR.WORD = (
+    	(True << RTC_INT_CLR_SUB_SEC_BIT_POS) |
+        (True << RTC_INT_CLR_SEC_BIT_POS)
+	);
 
-    /* TODO  ANDing SUB_SEC & SEC interrupt - work around for RTC issue - will be resolved in REV G */
-    if(TempStatus & RTC_SEC_INT_STATUS_MASK) {
-        /* Second interrupt occured */
-        if(SubSecond > False) {
-            /* Set SUB SEC_ALARM */
-            RTCREG->SUB_SECOND_ALARM = SubSecond + RTCREG->SUB_SECOND_COUNTER;
-            /* Enable sub second interrupt */
-            RTCREG->CONTROL.WORD |= (True << RTC_CONTROL_SUBSEC_CNT_INT_BIT_POS);
-        } else {
-            /* We reach here after second interrupt is occured */
-            RTCREG->CONTROL.WORD &= ~(True << RTC_CONTROL_SUBSEC_CNT_INT_BIT_POS) |
-                                    (True << RTC_CONTROL_SEC_CNT_INT_BIT_POS);
-        }
-    } else {
-        /* We reach here after sub_second or (Sub second + second) interrupt occured */
-		/* Disable Second and sub_second interrupt */
-        RTCREG->CONTROL.WORD &= ~(True << RTC_CONTROL_SUBSEC_CNT_INT_BIT_POS) |
-                                (True << RTC_CONTROL_SEC_CNT_INT_BIT_POS);
-    }
+    /* Disable sub seconds and seconds interrupts */
+    RTCREG->CONTROL.WORD &= ~(
+    	(True << RTC_CONTROL_SUBSEC_CNT_INT_BIT_POS) |
+        (True << RTC_CONTROL_SEC_CNT_INT_BIT_POS)
+	);
 
 	NVIC_EnableIRQ(Rtc_IRQn);
 	
-    /* Wait for RTC to finish writing register - RTC operates on 32K clock as compared to 32M core*/
-    while((RTCREG->STATUS.WORD & ((True << RTC_STATUS_SUB_SEC_ALARM_WRT_BIT_POS) |
-                                  (True << RTC_STATUS_CONTROL_WRT_BIT_POS) |
-                                  (True << RTC_STATUS_SUB_SEC_INT_CLR_WRT_BIT_POS) |
-                                  (True << RTC_STATUS_SEC_INT_CLR_WRT_BIT_POS))) == True);  
+    /* Wait for RTC to finish writing registers */
+    while(RTCREG->STATUS.WORD &
+    	(
+    		(True << RTC_STATUS_CONTROL_WRT_BIT_POS) |
+			(True << RTC_STATUS_SUB_SEC_INT_CLR_WRT_BIT_POS) |
+            (True << RTC_STATUS_SEC_INT_CLR_WRT_BIT_POS)
+		)
+	);
 	
 	lp_ticker_irq_handler();
 }