SAKURA Internet / mbed-dev

Fork of mbed-dev by mbed official

Committer:
<>
Date:
Thu Feb 02 17:01:33 2017 +0000
Revision:
157:ff67d9f36b67
Parent:
149:156823d33999
This updates the lib to the mbed lib v135

Who changed what in which revision?

UserRevisionLine numberNew contents of line
<> 144:ef7eb2e8f9f7 1 /**
<> 144:ef7eb2e8f9f7 2 ******************************************************************************
<> 144:ef7eb2e8f9f7 3 * @file stm32f3xx_hal_smartcard_ex.c
<> 144:ef7eb2e8f9f7 4 * @author MCD Application Team
<> 157:ff67d9f36b67 5 * @version V1.4.0
<> 157:ff67d9f36b67 6 * @date 16-December-2016
<> 144:ef7eb2e8f9f7 7 * @brief SMARTCARD HAL module driver.
<> 144:ef7eb2e8f9f7 8 * This file provides extended firmware functions to manage the following
<> 144:ef7eb2e8f9f7 9 * functionalities of the SmartCard.
<> 157:ff67d9f36b67 10 * + Initialization and de-initialization functions
<> 157:ff67d9f36b67 11 * + Peripheral Control functions
<> 144:ef7eb2e8f9f7 12 *
<> 144:ef7eb2e8f9f7 13 *
<> 144:ef7eb2e8f9f7 14 @verbatim
<> 144:ef7eb2e8f9f7 15 =============================================================================
<> 144:ef7eb2e8f9f7 16 ##### SMARTCARD peripheral extended features #####
<> 144:ef7eb2e8f9f7 17 =============================================================================
<> 144:ef7eb2e8f9f7 18 [..]
<> 144:ef7eb2e8f9f7 19 The Extended SMARTCARD HAL driver can be used as follows:
<> 144:ef7eb2e8f9f7 20
<> 144:ef7eb2e8f9f7 21 (#) After having configured the SMARTCARD basic features with HAL_SMARTCARD_Init(),
<> 144:ef7eb2e8f9f7 22 then program SMARTCARD advanced features if required (TX/RX pins swap, TimeOut,
<> 144:ef7eb2e8f9f7 23 auto-retry counter,...) in the hsmartcard AdvancedInit structure.
<> 144:ef7eb2e8f9f7 24
<> 144:ef7eb2e8f9f7 25
<> 144:ef7eb2e8f9f7 26
<> 144:ef7eb2e8f9f7 27 @endverbatim
<> 144:ef7eb2e8f9f7 28 ******************************************************************************
<> 144:ef7eb2e8f9f7 29 * @attention
<> 144:ef7eb2e8f9f7 30 *
<> 144:ef7eb2e8f9f7 31 * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
<> 144:ef7eb2e8f9f7 32 *
<> 144:ef7eb2e8f9f7 33 * Redistribution and use in source and binary forms, with or without modification,
<> 144:ef7eb2e8f9f7 34 * are permitted provided that the following conditions are met:
<> 144:ef7eb2e8f9f7 35 * 1. Redistributions of source code must retain the above copyright notice,
<> 144:ef7eb2e8f9f7 36 * this list of conditions and the following disclaimer.
<> 144:ef7eb2e8f9f7 37 * 2. Redistributions in binary form must reproduce the above copyright notice,
<> 144:ef7eb2e8f9f7 38 * this list of conditions and the following disclaimer in the documentation
<> 144:ef7eb2e8f9f7 39 * and/or other materials provided with the distribution.
<> 144:ef7eb2e8f9f7 40 * 3. Neither the name of STMicroelectronics nor the names of its contributors
<> 144:ef7eb2e8f9f7 41 * may be used to endorse or promote products derived from this software
<> 144:ef7eb2e8f9f7 42 * without specific prior written permission.
<> 144:ef7eb2e8f9f7 43 *
<> 144:ef7eb2e8f9f7 44 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
<> 144:ef7eb2e8f9f7 45 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
<> 144:ef7eb2e8f9f7 46 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
<> 144:ef7eb2e8f9f7 47 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
<> 144:ef7eb2e8f9f7 48 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
<> 144:ef7eb2e8f9f7 49 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
<> 144:ef7eb2e8f9f7 50 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
<> 144:ef7eb2e8f9f7 51 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
<> 144:ef7eb2e8f9f7 52 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
<> 144:ef7eb2e8f9f7 53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
<> 144:ef7eb2e8f9f7 54 *
<> 144:ef7eb2e8f9f7 55 ******************************************************************************
<> 144:ef7eb2e8f9f7 56 */
<> 144:ef7eb2e8f9f7 57
<> 144:ef7eb2e8f9f7 58 /* Includes ------------------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 59 #include "stm32f3xx_hal.h"
<> 144:ef7eb2e8f9f7 60
<> 144:ef7eb2e8f9f7 61 /** @addtogroup STM32F3xx_HAL_Driver
<> 144:ef7eb2e8f9f7 62 * @{
<> 144:ef7eb2e8f9f7 63 */
<> 144:ef7eb2e8f9f7 64
<> 144:ef7eb2e8f9f7 65 /** @defgroup SMARTCARDEx SMARTCARDEx
<> 144:ef7eb2e8f9f7 66 * @brief SMARTCARD Extension HAL module driver
<> 144:ef7eb2e8f9f7 67 * @{
<> 144:ef7eb2e8f9f7 68 */
<> 157:ff67d9f36b67 69 #ifdef HAL_SMARTCARD_MODULE_ENABLED
<> 144:ef7eb2e8f9f7 70
<> 144:ef7eb2e8f9f7 71 /* Private typedef -----------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 72 /* Private define ------------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 73 /* Private macros ------------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 74 /* Private variables ---------------------------------------------------------*/
<> 144:ef7eb2e8f9f7 75 /* Private function prototypes -----------------------------------------------*/
<> 144:ef7eb2e8f9f7 76
<> 144:ef7eb2e8f9f7 77 /* Exported functions --------------------------------------------------------*/
<> 157:ff67d9f36b67 78 /** @defgroup SMARTCARDEx_Exported_Functions SMARTCARD Extended Exported Functions
<> 144:ef7eb2e8f9f7 79 * @{
<> 144:ef7eb2e8f9f7 80 */
<> 144:ef7eb2e8f9f7 81
<> 144:ef7eb2e8f9f7 82 /** @defgroup SMARTCARDEx_Exported_Functions_Group1 Extended Peripheral Control functions
<> 144:ef7eb2e8f9f7 83 * @brief Extended control functions
<> 144:ef7eb2e8f9f7 84 *
<> 144:ef7eb2e8f9f7 85 @verbatim
<> 144:ef7eb2e8f9f7 86 ===============================================================================
<> 144:ef7eb2e8f9f7 87 ##### Peripheral Control functions #####
<> 144:ef7eb2e8f9f7 88 ===============================================================================
<> 144:ef7eb2e8f9f7 89 [..]
<> 144:ef7eb2e8f9f7 90 This subsection provides a set of functions allowing to initialize the SMARTCARD.
<> 144:ef7eb2e8f9f7 91 (+) HAL_SMARTCARDEx_BlockLength_Config() API allows to configure the Block Length on the fly
<> 144:ef7eb2e8f9f7 92 (+) HAL_SMARTCARDEx_TimeOut_Config() API allows to configure the receiver timeout value on the fly
<> 144:ef7eb2e8f9f7 93 (+) HAL_SMARTCARDEx_EnableReceiverTimeOut() API enables the receiver timeout feature
<> 144:ef7eb2e8f9f7 94 (+) HAL_SMARTCARDEx_DisableReceiverTimeOut() API disables the receiver timeout feature
<> 144:ef7eb2e8f9f7 95
<> 144:ef7eb2e8f9f7 96 @endverbatim
<> 144:ef7eb2e8f9f7 97 * @{
<> 144:ef7eb2e8f9f7 98 */
<> 144:ef7eb2e8f9f7 99
<> 144:ef7eb2e8f9f7 100 /**
<> 144:ef7eb2e8f9f7 101 * @brief Update on the fly the SMARTCARD block length in RTOR register.
<> 144:ef7eb2e8f9f7 102 * @param hsmartcard: Pointer to a SMARTCARD_HandleTypeDef structure that contains
<> 144:ef7eb2e8f9f7 103 * the configuration information for the specified SMARTCARD module.
<> 144:ef7eb2e8f9f7 104 * @param BlockLength: SMARTCARD block length (8-bit long at most)
<> 144:ef7eb2e8f9f7 105 * @retval None
<> 144:ef7eb2e8f9f7 106 */
<> 144:ef7eb2e8f9f7 107 void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength)
<> 144:ef7eb2e8f9f7 108 {
<> 144:ef7eb2e8f9f7 109 MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_BLEN, ((uint32_t)BlockLength << SMARTCARD_RTOR_BLEN_LSB_POS));
<> 144:ef7eb2e8f9f7 110 }
<> 144:ef7eb2e8f9f7 111
<> 144:ef7eb2e8f9f7 112 /**
<> 144:ef7eb2e8f9f7 113 * @brief Update on the fly the receiver timeout value in RTOR register.
<> 144:ef7eb2e8f9f7 114 * @param hsmartcard: Pointer to a SMARTCARD_HandleTypeDef structure that contains
<> 144:ef7eb2e8f9f7 115 * the configuration information for the specified SMARTCARD module.
<> 144:ef7eb2e8f9f7 116 * @param TimeOutValue: receiver timeout value in number of baud blocks. The timeout
<> 144:ef7eb2e8f9f7 117 * value must be less or equal to 0x0FFFFFFFF.
<> 144:ef7eb2e8f9f7 118 * @retval None
<> 144:ef7eb2e8f9f7 119 */
<> 144:ef7eb2e8f9f7 120 void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue)
<> 144:ef7eb2e8f9f7 121 {
<> 144:ef7eb2e8f9f7 122 assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue));
<> 144:ef7eb2e8f9f7 123 MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_RTO, TimeOutValue);
<> 144:ef7eb2e8f9f7 124 }
<> 144:ef7eb2e8f9f7 125
<> 144:ef7eb2e8f9f7 126 /**
<> 144:ef7eb2e8f9f7 127 * @brief Enable the SMARTCARD receiver timeout feature.
<> 144:ef7eb2e8f9f7 128 * @param hsmartcard: Pointer to a SMARTCARD_HandleTypeDef structure that contains
<> 144:ef7eb2e8f9f7 129 * the configuration information for the specified SMARTCARD module.
<> 144:ef7eb2e8f9f7 130 * @retval HAL status
<> 144:ef7eb2e8f9f7 131 */
<> 144:ef7eb2e8f9f7 132 HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard)
<> 144:ef7eb2e8f9f7 133 {
<> 144:ef7eb2e8f9f7 134
<> 157:ff67d9f36b67 135 if(hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
<> 157:ff67d9f36b67 136 {
<> 157:ff67d9f36b67 137 /* Process Locked */
<> 157:ff67d9f36b67 138 __HAL_LOCK(hsmartcard);
<> 144:ef7eb2e8f9f7 139
<> 157:ff67d9f36b67 140 hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY;
<> 157:ff67d9f36b67 141
<> 157:ff67d9f36b67 142 /* Set the USART RTOEN bit */
<> 157:ff67d9f36b67 143 SET_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN);
<> 144:ef7eb2e8f9f7 144
<> 157:ff67d9f36b67 145 hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
<> 144:ef7eb2e8f9f7 146
<> 157:ff67d9f36b67 147 /* Process Unlocked */
<> 157:ff67d9f36b67 148 __HAL_UNLOCK(hsmartcard);
<> 144:ef7eb2e8f9f7 149
<> 157:ff67d9f36b67 150 return HAL_OK;
<> 157:ff67d9f36b67 151 }
<> 157:ff67d9f36b67 152 else
<> 157:ff67d9f36b67 153 {
<> 157:ff67d9f36b67 154 return HAL_BUSY;
<> 157:ff67d9f36b67 155 }
<> 144:ef7eb2e8f9f7 156 }
<> 144:ef7eb2e8f9f7 157
<> 144:ef7eb2e8f9f7 158 /**
<> 144:ef7eb2e8f9f7 159 * @brief Disable the SMARTCARD receiver timeout feature.
<> 144:ef7eb2e8f9f7 160 * @param hsmartcard: Pointer to a SMARTCARD_HandleTypeDef structure that contains
<> 144:ef7eb2e8f9f7 161 * the configuration information for the specified SMARTCARD module.
<> 144:ef7eb2e8f9f7 162 * @retval HAL status
<> 144:ef7eb2e8f9f7 163 */
<> 144:ef7eb2e8f9f7 164 HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard)
<> 144:ef7eb2e8f9f7 165 {
<> 144:ef7eb2e8f9f7 166
<> 157:ff67d9f36b67 167 if(hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
<> 157:ff67d9f36b67 168 {
<> 157:ff67d9f36b67 169 /* Process Locked */
<> 157:ff67d9f36b67 170 __HAL_LOCK(hsmartcard);
<> 144:ef7eb2e8f9f7 171
<> 157:ff67d9f36b67 172 hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY;
<> 144:ef7eb2e8f9f7 173
<> 157:ff67d9f36b67 174 /* Clear the USART RTOEN bit */
<> 157:ff67d9f36b67 175 CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN);
<> 144:ef7eb2e8f9f7 176
<> 157:ff67d9f36b67 177 hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
<> 144:ef7eb2e8f9f7 178
<> 157:ff67d9f36b67 179 /* Process Unlocked */
<> 157:ff67d9f36b67 180 __HAL_UNLOCK(hsmartcard);
<> 144:ef7eb2e8f9f7 181
<> 157:ff67d9f36b67 182 return HAL_OK;
<> 157:ff67d9f36b67 183 }
<> 157:ff67d9f36b67 184 else
<> 157:ff67d9f36b67 185 {
<> 157:ff67d9f36b67 186 return HAL_BUSY;
<> 157:ff67d9f36b67 187 }
<> 157:ff67d9f36b67 188 }
<> 144:ef7eb2e8f9f7 189
<> 144:ef7eb2e8f9f7 190 /**
<> 144:ef7eb2e8f9f7 191 * @}
<> 144:ef7eb2e8f9f7 192 */
<> 144:ef7eb2e8f9f7 193
<> 144:ef7eb2e8f9f7 194 /**
<> 144:ef7eb2e8f9f7 195 * @}
<> 144:ef7eb2e8f9f7 196 */
<> 144:ef7eb2e8f9f7 197
<> 144:ef7eb2e8f9f7 198 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
<> 144:ef7eb2e8f9f7 199
<> 157:ff67d9f36b67 200 /**
<> 157:ff67d9f36b67 201 * @}
<> 157:ff67d9f36b67 202 */
<> 157:ff67d9f36b67 203
<> 157:ff67d9f36b67 204 /**
<> 157:ff67d9f36b67 205 * @}
<> 157:ff67d9f36b67 206 */
<> 157:ff67d9f36b67 207
<> 144:ef7eb2e8f9f7 208 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/