Diff: source/bh1726_driver.cpp

Revision:

2:40307a303153

Parent:

1:64629eee9eab

Child:

3:6eb91c7c6560

diff -r 64629eee9eab -r 40307a303153 source/bh1726_driver.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/bh1726_driver.cpp	Wed Sep 14 07:14:36 2016 +0000
@@ -0,0 +1,114 @@
+/*   Copyright 2016 Rohm Semiconductor
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.
+*/
+#include "../../rohm-sensor-hal/rohm-sensor-hal/rohm_hal.h"         //types, DEBUG_print*
+#include "../../rohm-sensor-hal/rohm-sensor-hal/I2CCommon.h"        //read_register, write_register, change_bits
+
+#include "../rohm-bh1726/bh1726.h"      //bh1726_* register definitions
+#include "../rohm-bh1726/bh1726_driver.h"
+//Choose SAD according to setup
+//#define SAD  0x29
+#define SAD 0x39
+
+/* bh1726 driver*/
+uint8_t bh1726_readId(){
+    uint8_t partid;
+    uint8_t read_bytes;
+
+    read_bytes = read_register(SAD, BH1726_ID, &partid, 1);
+    if ( read_bytes > 0 ){
+        DEBUG_printf("Part ID: %u\n\r", partid);
+        return(partid);
+        }
+    else{
+        DEBUG_print("Part ID read failed.\n\r");
+        return 255;
+        }
+}
+
+void bh1726_dumpregs(uint8_t dumpstart, uint8_t dumpend){
+    uint8_t i;
+    uint8_t value;
+    uint8_t read_bytes;
+    
+    for(i = dumpstart;i < dumpend;i++){
+        read_bytes = read_register(SAD, i, &value, 1);
+        if ( read_bytes > 0 ){
+            DEBUG_printf("Register [%3u]=[%3u]\n\r", i, value);
+            }
+        }
+    return;
+}
+
+void bh1726_wait_until_found(){
+  uint8_t id;
+
+  DEBUG_printf("Hoping to find part ID: %u\n\r", BH1726_ID_NUMBER_FOR_PART);
+  id = bh1726_readId();
+  while (id != BH1726_ID_NUMBER_FOR_PART){
+    wait_ms(100);
+    id = bh1726_readId();
+    }
+  return;
+  }
+
+void bh1726_soft_reset(){
+    write_register(SAD, BH1726_SOFTWARE_RESET, 0);
+}
+
+void bh1726_clear_interrupt(){
+    write_register(SAD, BH1726_INTERRUPT_OUTPUT_RESET, 0);
+}
+
+void bh1726_initial_setup(){
+    write_register(SAD, BH1726_TIMING,
+        (BH1726_TIMING_ITIME_38CYCLE)   //105ms measurement time
+        );
+    write_register(SAD, BH1726_INTERRUPT,
+        (BH1726_INTERRUPT_INT_LATCH_YES |
+        BH1726_INTERRUPT_INT_EN_FALSE |
+        BH1726_INTERRUPT_PERSIST_DRDY)
+        );
+    write_register(SAD, BH1726_GAIN,
+        (BH1726_GAIN_GAIN0_X1 |
+         BH1726_GAIN_GAIN1_X1)
+        );
+    write_register(SAD, BH1726_WAIT,
+        (BH1726_WAIT_WAIT_NO)
+        );
+    write_register(SAD, BH1726_CONTROL,
+        (BH1726_CONTROL_ADC_EN_TRUE |
+        BH1726_CONTROL_POWER_ON)
+        );
+}
+
+/* input param: data16, pointer to 4*16bit memory 
+   return: error, true/false */
+bool bh1726_read_data(uint16_t* data16){
+    #define BH1726_DATA_LEN 4
+    uint8_t data[BH1726_DATA_LEN];
+    uint8_t read_bytes;
+
+    read_bytes = read_register(SAD, BH1726_DATA0_LSBS, &data[0], BH1726_DATA_LEN);
+    if (read_bytes == BH1726_DATA_LEN){
+        data16[0] = (data[0]) | (data[1] << 8); //data0
+        data16[1] = (data[2]) | (data[3] << 8); //data1
+        return false;
+        }
+    else{
+        DEBUG_printf("Read error. Read %d bytes\n\r", read_bytes);
+        return true;
+        }
+   
+    }