Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependencies: HC_SR04_Ultrasonic_Library Servo mbed
Fork of
FIP_REV1
by 
Robotique FIP
lps25h.h File Reference
This file contains definitions for the lps25h.c firmware driver. More...
Go to the source code of this file.
Functions | |
| void | LPS25H_Init (PRESSURE_InitTypeDef *LPS25H_Init) |
| Set LPS25H Initialization. | |
| uint8_t | LPS25H_ReadID (void) |
| Read ID address of LPS25H. | |
| void | LPS25H_RebootCmd (void) |
| Reboot memory content of LPS25H. | |
| void | LPS25H_GetPressure (float *pfData) |
| Read LPS25H output register, and calculate the pressure in mbar. | |
| void | LPS25H_GetTemperature (float *pfData) |
| Read LPS25H output register, and calculate the temperature. | |
| void | LPS25H_PowerOff (void) |
| Enter the shutdown mode for LPS25H. | |
| void | LPS25H_SlaveAddrRemap (uint8_t) |
| Set the slave address according to SA0 bit. | |
| void | PRESSURE_IO_Init (void) |
| Configures Pressure I2C interface. | |
| void | PRESSURE_IO_Write (uint8_t *pBuffer, uint8_t DeviceAddr, uint8_t WriteAddr, uint16_t NumByteToWrite) |
| Writes a buffer to the Pressure sensor. | |
| void | PRESSURE_IO_Read (uint8_t *pBuffer, uint8_t DeviceAddr, uint8_t RegisterAddr, uint16_t NumByteToRead) |
| Reads a buffer from the Pressure sensor. | |
Detailed Description
This file contains definitions for the lps25h.c firmware driver.
- Version:
- V1.0.0
- Date:
- 30-July-2014
- Attention:
© COPYRIGHT(c) 2014 STMicroelectronics
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of STMicroelectronics nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Definition in file lps25h.h.
Generated on Tue Jul 12 2022 21:42:00 by
1.7.2