Rigado
mbed-src updated for BMD-200 evaluation board. Just pin numbers are updated.
Dependents: mbed_blinky-bmd-200 bmd-200_accel_demo firstRig
Fork of
mbed-src
by 
mbed official
Replacement for the "mbed" or "mbed-src" library when using the BMD-200 Evaluation kit. This library only remaps the pin names (i.e. LED1 points to p0.01 instead of p0.18, etc) as used by the BMD-200 Evaluation board (select the nRF51822_mkit platform). All other code is untouched.
Diff: common/BusIn.cpp
- Revision:
- 10:3bc89ef62ce7
- Parent:
- 9:0ce32e54c9a7
- Child:
- 13:0645d8841f51
diff -r 0ce32e54c9a7 -r 3bc89ef62ce7 common/BusIn.cpp
--- a/common/BusIn.cpp Mon Jun 10 16:03:00 2013 +0100
+++ b/common/BusIn.cpp Fri Jun 14 17:49:17 2013 +0100
@@ -1,58 +1,58 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "BusIn.h"
-
-namespace mbed {
-
-BusIn::BusIn(PinName p0, PinName p1, PinName p2, PinName p3, PinName p4, PinName p5, PinName p6, PinName p7, PinName p8, PinName p9, PinName p10, PinName p11, PinName p12, PinName p13, PinName p14, PinName p15) {
- PinName pins[16] = {p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, p13, p14, p15};
-
- for (int i=0; i<16; i++) {
- _pin[i] = (pins[i] != NC) ? new DigitalIn(pins[i]) : 0;
- }
-}
-
-BusIn::BusIn(PinName pins[16]) {
- for (int i=0; i<16; i++) {
- _pin[i] = (pins[i] != NC) ? new DigitalIn(pins[i]) : 0;
- }
-}
-
-BusIn::~BusIn() {
- for (int i=0; i<16; i++) {
- if (_pin[i] != 0) {
- delete _pin[i];
- }
- }
-}
-
-int BusIn::read() {
- int v = 0;
- for (int i=0; i<16; i++) {
- if (_pin[i] != 0) {
- v |= _pin[i]->read() << i;
- }
- }
- return v;
-}
-
-#ifdef MBED_OPERATORS
-BusIn::operator int() {
- return read();
-}
-#endif
-
-} // namespace mbed
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "BusIn.h"
+
+namespace mbed {
+
+BusIn::BusIn(PinName p0, PinName p1, PinName p2, PinName p3, PinName p4, PinName p5, PinName p6, PinName p7, PinName p8, PinName p9, PinName p10, PinName p11, PinName p12, PinName p13, PinName p14, PinName p15) {
+ PinName pins[16] = {p0, p1, p2, p3, p4, p5, p6, p7, p8, p9, p10, p11, p12, p13, p14, p15};
+
+ for (int i=0; i<16; i++) {
+ _pin[i] = (pins[i] != NC) ? new DigitalIn(pins[i]) : 0;
+ }
+}
+
+BusIn::BusIn(PinName pins[16]) {
+ for (int i=0; i<16; i++) {
+ _pin[i] = (pins[i] != NC) ? new DigitalIn(pins[i]) : 0;
+ }
+}
+
+BusIn::~BusIn() {
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ delete _pin[i];
+ }
+ }
+}
+
+int BusIn::read() {
+ int v = 0;
+ for (int i=0; i<16; i++) {
+ if (_pin[i] != 0) {
+ v |= _pin[i]->read() << i;
+ }
+ }
+ return v;
+}
+
+#ifdef MBED_OPERATORS
+BusIn::operator int() {
+ return read();
+}
+#endif
+
+} // namespace mbed