Rigado / mbed-src-bmd-200

mbed-src updated for BMD-200 evaluation board. Just pin numbers are updated.

Dependents:   mbed_blinky-bmd-200 bmd-200_accel_demo firstRig

Fork of mbed-src by mbed official

Replacement for the "mbed" or "mbed-src" library when using the BMD-200 Evaluation kit. This library only remaps the pin names (i.e. LED1 points to p0.01 instead of p0.18, etc) as used by the BMD-200 Evaluation board (select the nRF51822_mkit platform). All other code is untouched.

targets/hal/TARGET_NXP/TARGET_LPC23XX/pinmap.c

Committer:
bogdanm
Date:
2013-08-05
Revision:
13:0645d8841f51
Parent:
vendor/NXP/LPC2368/hal/pinmap.c@ 10:3bc89ef62ce7
Child:
23:8d50de55f208

File content as of revision 13:0645d8841f51:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "pinmap.h"
#include "error.h"

void pin_function(PinName pin, int function) {
    if (pin == (uint32_t)NC) return;
    
    uint32_t pin_number = (uint32_t)pin - (uint32_t)P0_0;
    int index = pin_number >> 4;
    int offset = (pin_number & 0xF) << 1;
    
    PINCONARRAY->PINSEL[index] &= ~(0x3 << offset);
    PINCONARRAY->PINSEL[index] |= function << offset;
}

void pin_mode(PinName pin, PinMode mode) {
    if (pin == (uint32_t)NC) { return; }
    
    uint32_t pin_number = (uint32_t)pin - (uint32_t)P0_0;
    int index = pin_number >> 5;
    int offset = pin_number & 0x1F;
    uint32_t drain = ((uint32_t) mode & (uint32_t) OpenDrain) >> 2;
    
    if (mode == OpenDrain) error("OpenDrain not supported on LPC2368");
    
    if (!drain) {
        index = pin_number >> 4;
        offset = (pin_number & 0xF) << 1;
        
        PINCONARRAY->PINMODE[index] &= ~(0x3 << offset);
        PINCONARRAY->PINMODE[index] |= (uint32_t)mode << offset;
    }
}