Diff: targets/hal/TARGET_NXP/TARGET_LPC2460/PeripheralNames.h

Revision:

558:edd95c0879f8

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC2460/PeripheralNames.h	Mon Jun 01 11:00:11 2015 +0100
@@ -0,0 +1,120 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    UART_0 = (int)LPC_UART0_BASE,
+    UART_1 = (int)LPC_UART1_BASE,
+    UART_2 = (int)LPC_UART2_BASE,
+    UART_3 = (int)LPC_UART3_BASE
+} UARTName;
+
+typedef enum {
+    ADC0_0 = 0,
+    ADC0_1,
+    ADC0_2,
+    ADC0_3,
+    ADC0_4,
+    ADC0_5,
+    ADC0_6,
+    ADC0_7
+} ADCName;
+
+typedef enum {
+    DAC_0 = 0
+} DACName;
+
+typedef enum {
+    SPI_0 = (int)LPC_SSP0_BASE,
+    SPI_1 = (int)LPC_SSP1_BASE
+} SPIName;
+
+typedef enum {
+    I2C_0 = (int)LPC_I2C0_BASE,
+    I2C_1 = (int)LPC_I2C1_BASE,
+    I2C_2 = (int)LPC_I2C2_BASE
+} I2CName;
+
+typedef enum {
+    PWM_1 = 1,
+    PWM_2,
+    PWM_3,
+    PWM_4,
+    PWM_5,
+    PWM_6
+} PWMName;
+
+typedef enum {
+     CAN_1 = (int)LPC_CAN1_BASE,
+     CAN_2 = (int)LPC_CAN2_BASE
+} CANName;
+
+#define STDIO_UART_TX     USBTX
+#define STDIO_UART_RX     USBRX
+#define STDIO_UART        UART_2
+
+// Default peripherals
+#define MBED_SPI0         p5, p6, p7, p8
+//#define MBED_SPI1         p11, p12, p13, p14
+
+#define MBED_UART0        p9, p10
+#define MBED_UART1        p13, p14
+#define MBED_UART2        p15, p16
+#define MBED_UARTUSB      USBTX, USBRX
+
+#define MBED_I2C0         p17, p18
+//#define MBED_I2C1         p9, p10
+
+#define MBED_CAN0         p19, p20
+
+#define MBED_ANALOGOUT0   p21
+
+#define MBED_ANALOGIN0    p22
+#define MBED_ANALOGIN1    p23
+//#define MBED_ANALOGIN2    p17
+//#define MBED_ANALOGIN3    p18
+//#define MBED_ANALOGIN4    p19
+//#define MBED_ANALOGIN5    p20
+
+#define MBED_PWMOUT0      p24
+#define MBED_PWMOUT1      p25
+#define MBED_PWMOUT2      p26
+#define MBED_PWMOUT3      p27
+//#define MBED_PWMOUT4      p22
+//#define MBED_PWMOUT5      p21
+
+#define MBED_USB_D_PLUS   p28
+#define MBED_USB_D_MINUS  p29
+
+#define MBED_MCICLK       p30
+#define MBED_MCICMD       p31
+#define MBED_MCIDAT0      p32
+#define MBED_MCIDAT1      p33
+#define MBED_MCIDAT2      p34
+#define MBED_MCIDAT3      p35
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif