Rigado
mbed-src updated for BMD-200 evaluation board. Just pin numbers are updated.
Dependents: mbed_blinky-bmd-200 bmd-200_accel_demo firstRig
Fork of
mbed-src
by 
mbed official
Replacement for the "mbed" or "mbed-src" library when using the BMD-200 Evaluation kit. This library only remaps the pin names (i.e. LED1 points to p0.01 instead of p0.18, etc) as used by the BMD-200 Evaluation board (select the nRF51822_mkit platform). All other code is untouched.
Diff: targets/cmsis/TARGET_NXP/TARGET_LPC81X/LPC8xx.h
- Revision:
- 483:69aad4cbc07a
- Parent:
- 46:bebbbd80dd87
--- a/targets/cmsis/TARGET_NXP/TARGET_LPC81X/LPC8xx.h Sat Feb 21 15:00:07 2015 +0000
+++ b/targets/cmsis/TARGET_NXP/TARGET_LPC81X/LPC8xx.h Tue Feb 24 13:45:08 2015 +0000
@@ -368,23 +368,46 @@
} LPC_WKT_TypeDef;
/*@}*/ /* end of group LPC8xx_WKT */
-
/*------------- Multi-Rate Timer(MRT) --------------------------------------------------*/
-typedef struct {
-__IO uint32_t INTVAL;
-__IO uint32_t TIMER;
-__IO uint32_t CTRL;
-__IO uint32_t STAT;
-} MRT_Channel_cfg_Type;
-
-typedef struct {
- MRT_Channel_cfg_Type Channel[4];
- uint32_t Reserved0[1];
- __IO uint32_t IDLE_CH;
- __IO uint32_t IRQ_FLAG;
+//New, Copied from lpc824
+/**
+ * @brief Multi-Rate Timer (MRT) (MRT)
+ */
+typedef struct { /*!< (@ 0x40004000) MRT Structure */
+ __IO uint32_t INTVAL0; /*!< (@ 0x40004000) MRT0 Time interval value register. This value
+ is loaded into the TIMER0 register. */
+ __I uint32_t TIMER0; /*!< (@ 0x40004004) MRT0 Timer register. This register reads the
+ value of the down-counter. */
+ __IO uint32_t CTRL0; /*!< (@ 0x40004008) MRT0 Control register. This register controls
+ the MRT0 modes. */
+ __IO uint32_t STAT0; /*!< (@ 0x4000400C) MRT0 Status register. */
+ __IO uint32_t INTVAL1; /*!< (@ 0x40004010) MRT0 Time interval value register. This value
+ is loaded into the TIMER0 register. */
+ __I uint32_t TIMER1; /*!< (@ 0x40004014) MRT0 Timer register. This register reads the
+ value of the down-counter. */
+ __IO uint32_t CTRL1; /*!< (@ 0x40004018) MRT0 Control register. This register controls
+ the MRT0 modes. */
+ __IO uint32_t STAT1; /*!< (@ 0x4000401C) MRT0 Status register. */
+ __IO uint32_t INTVAL2; /*!< (@ 0x40004020) MRT0 Time interval value register. This value
+ is loaded into the TIMER0 register. */
+ __I uint32_t TIMER2; /*!< (@ 0x40004024) MRT0 Timer register. This register reads the
+ value of the down-counter. */
+ __IO uint32_t CTRL2; /*!< (@ 0x40004028) MRT0 Control register. This register controls
+ the MRT0 modes. */
+ __IO uint32_t STAT2; /*!< (@ 0x4000402C) MRT0 Status register. */
+ __IO uint32_t INTVAL3; /*!< (@ 0x40004030) MRT0 Time interval value register. This value
+ is loaded into the TIMER0 register. */
+ __I uint32_t TIMER3; /*!< (@ 0x40004034) MRT0 Timer register. This register reads the
+ value of the down-counter. */
+ __IO uint32_t CTRL3; /*!< (@ 0x40004038) MRT0 Control register. This register controls
+ the MRT0 modes. */
+ __IO uint32_t STAT3; /*!< (@ 0x4000403C) MRT0 Status register. */
+ __I uint32_t RESERVED0[45];
+ __I uint32_t IDLE_CH; /*!< (@ 0x400040F4) Idle channel register. This register returns
+ the number of the first idle channel. */
+ __IO uint32_t IRQ_FLAG; /*!< (@ 0x400040F8) Global interrupt flag register */
} LPC_MRT_TypeDef;
-
/*------------- Universal Asynchronous Receiver Transmitter (USART) -----------*/
/** @addtogroup LPC8xx_UART LPC8xx Universal Asynchronous Receiver/Transmitter
@{