Rigado / mbed-src-bmd-200

mbed-src updated for BMD-200 evaluation board. Just pin numbers are updated.

Dependents:   mbed_blinky-bmd-200 bmd-200_accel_demo firstRig

Fork of mbed-src by mbed official

Replacement for the "mbed" or "mbed-src" library when using the BMD-200 Evaluation kit. This library only remaps the pin names (i.e. LED1 points to p0.01 instead of p0.18, etc) as used by the BMD-200 Evaluation board (select the nRF51822_mkit platform). All other code is untouched.

Diff: hal/pwmout_api.h

Revision:
10:3bc89ef62ce7
Parent:
9:0ce32e54c9a7
Child:
13:0645d8841f51
--- a/hal/pwmout_api.h	Mon Jun 10 16:03:00 2013 +0100
+++ b/hal/pwmout_api.h	Fri Jun 14 17:49:17 2013 +0100
@@ -1,49 +1,49 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PWMOUT_API_H
-#define MBED_PWMOUT_API_H
-
-#include "device.h"
-
-#if DEVICE_PWMOUT
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct pwmout_s pwmout_t;
-
-void pwmout_init         (pwmout_t* obj, PinName pin);
-void pwmout_free         (pwmout_t* obj);
-
-void  pwmout_write       (pwmout_t* obj, float percent);
-float pwmout_read        (pwmout_t* obj);
-
-void pwmout_period       (pwmout_t* obj, float seconds);
-void pwmout_period_ms    (pwmout_t* obj, int ms);
-void pwmout_period_us    (pwmout_t* obj, int us);
-
-void pwmout_pulsewidth   (pwmout_t* obj, float seconds);
-void pwmout_pulsewidth_ms(pwmout_t* obj, int ms);
-void pwmout_pulsewidth_us(pwmout_t* obj, int us);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-#endif
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PWMOUT_API_H
+#define MBED_PWMOUT_API_H
+
+#include "device.h"
+
+#if DEVICE_PWMOUT
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct pwmout_s pwmout_t;
+
+void pwmout_init         (pwmout_t* obj, PinName pin);
+void pwmout_free         (pwmout_t* obj);
+
+void  pwmout_write       (pwmout_t* obj, float percent);
+float pwmout_read        (pwmout_t* obj);
+
+void pwmout_period       (pwmout_t* obj, float seconds);
+void pwmout_period_ms    (pwmout_t* obj, int ms);
+void pwmout_period_us    (pwmout_t* obj, int us);
+
+void pwmout_pulsewidth   (pwmout_t* obj, float seconds);
+void pwmout_pulsewidth_ms(pwmout_t* obj, int ms);
+void pwmout_pulsewidth_us(pwmout_t* obj, int us);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif