mbed-src updated for BMD-200 evaluation board. Just pin numbers are updated.

Dependents:   mbed_blinky-bmd-200 bmd-200_accel_demo firstRig

Fork of mbed-src by mbed official

Replacement for the "mbed" or "mbed-src" library when using the BMD-200 Evaluation kit. This library only remaps the pin names (i.e. LED1 points to p0.01 instead of p0.18, etc) as used by the BMD-200 Evaluation board (select the nRF51822_mkit platform). All other code is untouched.

Revision:
10:3bc89ef62ce7
Parent:
9:0ce32e54c9a7
Child:
13:0645d8841f51
--- a/common/Serial.cpp	Mon Jun 10 16:03:00 2013 +0100
+++ b/common/Serial.cpp	Fri Jun 14 17:49:17 2013 +0100
@@ -1,70 +1,70 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#include "Serial.h"
-
-#if DEVICE_SERIAL
-
-namespace mbed {
-
-Serial::Serial(PinName tx, PinName rx, const char *name) : Stream(name) {
-    serial_init(&_serial, tx, rx);
-    serial_irq_handler(&_serial, Serial::_irq_handler, (uint32_t)this);
-}
-
-void Serial::baud(int baudrate) {
-    serial_baud(&_serial, baudrate);
-}
-
-void Serial::format(int bits, Parity parity, int stop_bits) {
-    serial_format(&_serial, bits, (SerialParity)parity, stop_bits);
-}
-
-int Serial::readable() {
-    return serial_readable(&_serial);
-}
-
-
-int Serial::writeable() {
-    return serial_writable(&_serial);
-}
-
-void Serial::attach(void (*fptr)(void), IrqType type) {
-    if (fptr) {
-        _irq[type].attach(fptr);
-        serial_irq_set(&_serial, (SerialIrq)type, 1);
-    } else {
-        serial_irq_set(&_serial, (SerialIrq)type, 0);
-    }
-}
-
-
-void Serial::_irq_handler(uint32_t id, SerialIrq irq_type) {
-    Serial *handler = (Serial*)id;
-    handler->_irq[irq_type].call();
-}
-
-int Serial::_getc() {
-    return serial_getc(&_serial);
-}
-
-int Serial::_putc(int c) {
-    serial_putc(&_serial, c);
-    return c;
-}
-
-} // namespace mbed
-
-#endif
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "Serial.h"
+
+#if DEVICE_SERIAL
+
+namespace mbed {
+
+Serial::Serial(PinName tx, PinName rx, const char *name) : Stream(name) {
+    serial_init(&_serial, tx, rx);
+    serial_irq_handler(&_serial, Serial::_irq_handler, (uint32_t)this);
+}
+
+void Serial::baud(int baudrate) {
+    serial_baud(&_serial, baudrate);
+}
+
+void Serial::format(int bits, Parity parity, int stop_bits) {
+    serial_format(&_serial, bits, (SerialParity)parity, stop_bits);
+}
+
+int Serial::readable() {
+    return serial_readable(&_serial);
+}
+
+
+int Serial::writeable() {
+    return serial_writable(&_serial);
+}
+
+void Serial::attach(void (*fptr)(void), IrqType type) {
+    if (fptr) {
+        _irq[type].attach(fptr);
+        serial_irq_set(&_serial, (SerialIrq)type, 1);
+    } else {
+        serial_irq_set(&_serial, (SerialIrq)type, 0);
+    }
+}
+
+
+void Serial::_irq_handler(uint32_t id, SerialIrq irq_type) {
+    Serial *handler = (Serial*)id;
+    handler->_irq[irq_type].call();
+}
+
+int Serial::_getc() {
+    return serial_getc(&_serial);
+}
+
+int Serial::_putc(int c) {
+    serial_putc(&_serial, c);
+    return c;
+}
+
+} // namespace mbed
+
+#endif