Fork of mbed-dsp. CMSIS-DSP library of supporting NEON

Dependents:   mbed-os-example-cmsis_dsp_neon

Fork of mbed-dsp by mbed official

Information

Japanese version is available in lower part of this page.
このページの後半に日本語版が用意されています.

CMSIS-DSP of supporting NEON

What is this ?

A library for CMSIS-DSP of supporting NEON.
We supported the NEON to CMSIS-DSP Ver1.4.3(CMSIS V4.1) that ARM supplied, has achieved the processing speed improvement.
If you use the mbed-dsp library, you can use to replace this library.
CMSIS-DSP of supporting NEON is provied as a library.

Library Creation environment

CMSIS-DSP library of supporting NEON was created by the following environment.

  • Compiler
    ARMCC Version 5.03
  • Compile option switch[C Compiler]
   -DARM_MATH_MATRIX_CHECK -DARM_MATH_ROUNDING -O3 -Otime --cpu=Cortex-A9 --littleend --arm 
   --apcs=/interwork --no_unaligned_access --fpu=vfpv3_fp16 --fpmode=fast --apcs=/hardfp 
   --vectorize --asm
  • Compile option switch[Assembler]
   --cpreproc --cpu=Cortex-A9 --littleend --arm --apcs=/interwork --no_unaligned_access 
   --fpu=vfpv3_fp16 --fpmode=fast --apcs=/hardfp


Effects of NEON support

In the data which passes to each function, large size will be expected more effective than small size.
Also if the data is a multiple of 16, effect will be expected in every function in the CMSIS-DSP.


NEON対応CMSIS-DSP

概要

NEON対応したCMSIS-DSPのライブラリです。
ARM社提供のCMSIS-DSP Ver1.4.3(CMSIS V4.1)をターゲットにNEON対応を行ない、処理速度向上を実現しております。
mbed-dspライブラリを使用している場合は、本ライブラリに置き換えて使用することができます。
NEON対応したCMSIS-DSPはライブラリで提供します。

ライブラリ作成環境

NEON対応CMSIS-DSPライブラリは、以下の環境で作成しています。

  • コンパイラ
    ARMCC Version 5.03
  • コンパイルオプションスイッチ[C Compiler]
   -DARM_MATH_MATRIX_CHECK -DARM_MATH_ROUNDING -O3 -Otime --cpu=Cortex-A9 --littleend --arm 
   --apcs=/interwork --no_unaligned_access --fpu=vfpv3_fp16 --fpmode=fast --apcs=/hardfp 
   --vectorize --asm
  • コンパイルオプションスイッチ[Assembler]
   --cpreproc --cpu=Cortex-A9 --littleend --arm --apcs=/interwork --no_unaligned_access 
   --fpu=vfpv3_fp16 --fpmode=fast --apcs=/hardfp


NEON対応による効果について

CMSIS-DSP内の各関数へ渡すデータは、小さいサイズよりも大きいサイズの方が効果が見込めます。
また、16の倍数のデータであれば、CMSIS-DSP内のどの関数でも効果が見込めます。


Revision:
1:fdd22bb7aa52
Child:
2:da51fb522205
diff -r 83d0537c7d84 -r fdd22bb7aa52 cmsis_dsp/MatrixFunctions/arm_mat_add_q31.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/cmsis_dsp/MatrixFunctions/arm_mat_add_q31.c	Wed Nov 28 12:30:09 2012 +0000
@@ -0,0 +1,205 @@
+/* ----------------------------------------------------------------------    
+* Copyright (C) 2010 ARM Limited. All rights reserved.    
+*    
+* $Date:        15. February 2012  
+* $Revision:     V1.1.0  
+*    
+* Project:         CMSIS DSP Library    
+* Title:        arm_mat_add_q31.c    
+*    
+* Description:    Q31 matrix addition    
+*    
+* Target Processor: Cortex-M4/Cortex-M3/Cortex-M0
+*  
+* Version 1.1.0 2012/02/15 
+*    Updated with more optimizations, bug fixes and minor API changes.  
+*   
+* Version 1.0.10 2011/7/15  
+*    Big Endian support added and Merged M0 and M3/M4 Source code.   
+*    
+* Version 1.0.3 2010/11/29   
+*    Re-organized the CMSIS folders and updated documentation.    
+*     
+* Version 1.0.2 2010/11/11    
+*    Documentation updated.     
+*    
+* Version 1.0.1 2010/10/05     
+*    Production release and review comments incorporated.    
+*    
+* Version 1.0.0 2010/09/20     
+*    Production release and review comments incorporated.    
+*    
+* Version 0.0.5  2010/04/26     
+*    incorporated review comments and updated with latest CMSIS layer    
+*    
+* Version 0.0.3  2010/03/10     
+*    Initial version    
+* -------------------------------------------------------------------- */
+
+#include "arm_math.h"
+
+/**      
+ * @ingroup groupMatrix      
+ */
+
+/**      
+ * @addtogroup MatrixAdd      
+ * @{      
+ */
+
+/**      
+ * @brief Q31 matrix addition.      
+ * @param[in]       *pSrcA points to the first input matrix structure      
+ * @param[in]       *pSrcB points to the second input matrix structure      
+ * @param[out]      *pDst points to output matrix structure      
+ * @return             The function returns either      
+ * <code>ARM_MATH_SIZE_MISMATCH</code> or <code>ARM_MATH_SUCCESS</code> based on the outcome of size checking.      
+ *      
+ * <b>Scaling and Overflow Behavior:</b>      
+ * \par      
+ * The function uses saturating arithmetic.      
+ * Results outside of the allowable Q31 range [0x80000000 0x7FFFFFFF] will be saturated.      
+ */
+
+arm_status arm_mat_add_q31(
+  const arm_matrix_instance_q31 * pSrcA,
+  const arm_matrix_instance_q31 * pSrcB,
+  arm_matrix_instance_q31 * pDst)
+{
+  q31_t *pIn1 = pSrcA->pData;                    /* input data matrix pointer A */
+  q31_t *pIn2 = pSrcB->pData;                    /* input data matrix pointer B */
+  q31_t *pOut = pDst->pData;                     /* output data matrix pointer */
+  q31_t inA1, inB1;                              /* temporary variables */
+
+#ifndef ARM_MATH_CM0
+
+  q31_t inA2, inB2;                              /* temporary variables */
+  q31_t out1, out2;                              /* temporary variables */
+
+#endif //      #ifndef ARM_MATH_CM0
+
+  uint32_t numSamples;                           /* total number of elements in the matrix  */
+  uint32_t blkCnt;                               /* loop counters */
+  arm_status status;                             /* status of matrix addition */
+
+#ifdef ARM_MATH_MATRIX_CHECK
+  /* Check for matrix mismatch condition */
+  if((pSrcA->numRows != pSrcB->numRows) ||
+     (pSrcA->numCols != pSrcB->numCols) ||
+     (pSrcA->numRows != pDst->numRows) || (pSrcA->numCols != pDst->numCols))
+  {
+    /* Set status as ARM_MATH_SIZE_MISMATCH */
+    status = ARM_MATH_SIZE_MISMATCH;
+  }
+  else
+#endif
+  {
+    /* Total number of samples in the input matrix */
+    numSamples = (uint32_t) pSrcA->numRows * pSrcA->numCols;
+
+#ifndef ARM_MATH_CM0
+
+    /* Run the below code for Cortex-M4 and Cortex-M3 */
+
+    /* Loop Unrolling */
+    blkCnt = numSamples >> 2u;
+
+
+    /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.    
+     ** a second loop below computes the remaining 1 to 3 samples. */
+    while(blkCnt > 0u)
+    {
+      /* C(m,n) = A(m,n) + B(m,n) */
+      /* Add, saturate and then store the results in the destination buffer. */
+      /* Read values from source A */
+      inA1 = pIn1[0];
+
+      /* Read values from source B */
+      inB1 = pIn2[0];
+
+      /* Read values from source A */
+      inA2 = pIn1[1];
+
+      /* Add and saturate */
+      out1 = __QADD(inA1, inB1);
+
+      /* Read values from source B */
+      inB2 = pIn2[1];
+
+      /* Read values from source A */
+      inA1 = pIn1[2];
+
+      /* Add and saturate */
+      out2 = __QADD(inA2, inB2);
+
+      /* Read values from source B */
+      inB1 = pIn2[2];
+
+      /* Store result in destination */
+      pOut[0] = out1;
+      pOut[1] = out2;
+
+      /* Read values from source A */
+      inA2 = pIn1[3];
+
+      /* Read values from source B */
+      inB2 = pIn2[3];
+
+      /* Add and saturate */
+      out1 = __QADD(inA1, inB1);
+      out2 = __QADD(inA2, inB2);
+
+      /* Store result in destination */
+      pOut[2] = out1;
+      pOut[3] = out2;
+
+      /* update pointers to process next sampels */
+      pIn1 += 4u;
+      pIn2 += 4u;
+      pOut += 4u;
+
+      /* Decrement the loop counter */
+      blkCnt--;
+    }
+
+    /* If the numSamples is not a multiple of 4, compute any remaining output samples here.      
+     ** No loop unrolling is used. */
+    blkCnt = numSamples % 0x4u;
+
+#else
+
+    /* Run the below code for Cortex-M0 */
+
+    /* Initialize blkCnt with number of samples */
+    blkCnt = numSamples;
+
+
+#endif /* #ifndef ARM_MATH_CM0 */
+
+    while(blkCnt > 0u)
+    {
+      /* C(m,n) = A(m,n) + B(m,n) */
+      /* Add, saturate and then store the results in the destination buffer. */
+      inA1 = *pIn1++;
+      inB1 = *pIn2++;
+
+      inA1 = __QADD(inA1, inB1);
+
+      /* Decrement the loop counter */
+      blkCnt--;
+
+      *pOut++ = inA1;
+
+    }
+
+    /* set status as ARM_MATH_SUCCESS */
+    status = ARM_MATH_SUCCESS;
+  }
+
+  /* Return to application */
+  return (status);
+}
+
+/**      
+ * @} end of MatrixAdd group      
+ */