Renesas / Mbed OS SDG_Mouse_Sample

Dependencies:   Sound_Generator USBHost_custom

Fork of SDG_Mouse_Sample by GR-PEACH_producer_meeting

Information

Japanese version is available in lower part of this page.
このページの後半に日本語版が用意されています.

What is this?

This program is a demonstration that sounds the sound by mouse operation by using USBHost(Mouse) and Sound Generator.

Settings

Close JP3 of GR-PEACH.
/media/uploads/RyoheiHagimoto/sdg-mouse.jpg

Operation

operationeffect
Right clickSounds
Left clickReset to base tone (C)
Moves the mouse to the rightLower the sound
Moves the mouse to the leftHigher the sound
Center cursorAdjust the sensitivity.
Reset the reference value in the click.

Others

The default setting of serial communication (baud rate etc.) in mbed is shown the following link.
Please refer to the link and change the settings of your PC terminal software.
The default value of baud rate in mbed is 9600, and this application uses baud rate 9600.
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication


概要

このプログラムは、USBHost(Mouse) + Sound Generatorで、マウス操作による擬似笛デモです。

設定

GR-PEACHのJP3をショートする必要があります。
/media/uploads/RyoheiHagimoto/sdg-mouse.jpg

操作方法

操作内容
右クリック音出力開始
左クリック基準音(ド)にリセット
マウス右移動高音になります
マウス左移動低音になります
センターカーソル音高低の変化量調整(クリックで基準値にリセット)

Others

mbedのシリアル通信(ボーレート等)のデフォルト設定は以下のリンクに示しています。
リンクを参考に、お使いのPCターミナルソフトの設定を変更して下さい。
mbedでのボーレートのデフォルト値は9600で、このサンプルではボーレート9600を使います。
https://developer.mbed.org/teams/Renesas/wiki/GR-PEACH-Getting-Started#install-the-usb-serial-communication

Committer:
MasaoHamanaka
Date:
Tue Mar 31 07:44:06 2015 +0000
Revision:
29:181839dc8cb0
Parent:
24:868cbfe611a7
change USBHost lib

Who changed what in which revision?

UserRevisionLine numberNew contents of line
samux 8:93da8ea2708b 1 /* mbed USBHost Library
samux 8:93da8ea2708b 2 * Copyright (c) 2006-2013 ARM Limited
samux 8:93da8ea2708b 3 *
samux 8:93da8ea2708b 4 * Licensed under the Apache License, Version 2.0 (the "License");
samux 8:93da8ea2708b 5 * you may not use this file except in compliance with the License.
samux 8:93da8ea2708b 6 * You may obtain a copy of the License at
samux 8:93da8ea2708b 7 *
samux 8:93da8ea2708b 8 * http://www.apache.org/licenses/LICENSE-2.0
samux 8:93da8ea2708b 9 *
samux 8:93da8ea2708b 10 * Unless required by applicable law or agreed to in writing, software
samux 8:93da8ea2708b 11 * distributed under the License is distributed on an "AS IS" BASIS,
samux 8:93da8ea2708b 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
samux 8:93da8ea2708b 13 * See the License for the specific language governing permissions and
samux 8:93da8ea2708b 14 * limitations under the License.
samux 8:93da8ea2708b 15 */
mbed_official 0:a554658735bf 16
mbed_official 0:a554658735bf 17 #include "USBHostKeyboard.h"
mbed_official 0:a554658735bf 18
mbed_official 0:a554658735bf 19 #if USBHOST_KEYBOARD
mbed_official 0:a554658735bf 20
mbed_official 24:868cbfe611a7 21 static uint8_t keymap[4][0x39] = {
mbed_official 0:a554658735bf 22 { 0, 0, 0, 0, 'a', 'b' /*0x05*/,
mbed_official 0:a554658735bf 23 'c', 'd', 'e', 'f', 'g' /*0x0a*/,
mbed_official 0:a554658735bf 24 'h', 'i', 'j', 'k', 'l'/*0x0f*/,
mbed_official 0:a554658735bf 25 'm', 'n', 'o', 'p', 'q'/*0x14*/,
mbed_official 0:a554658735bf 26 'r', 's', 't', 'u', 'v'/*0x19*/,
mbed_official 0:a554658735bf 27 'w', 'x', 'y', 'z', '1'/*0x1E*/,
mbed_official 0:a554658735bf 28 '2', '3', '4', '5', '6'/*0x23*/,
mbed_official 0:a554658735bf 29 '7', '8', '9', '0', 0x0A /*enter*/, /*0x28*/
mbed_official 0:a554658735bf 30 0x1B /*escape*/, 0x08 /*backspace*/, 0x09/*tab*/, 0x20/*space*/, '-', /*0x2d*/
mbed_official 0:a554658735bf 31 '=', '[', ']', '\\', '#', /*0x32*/
mbed_official 0:a554658735bf 32 ';', '\'', 0, ',', '.', /*0x37*/
mbed_official 0:a554658735bf 33 '/'},
mbed_official 0:a554658735bf 34
mbed_official 0:a554658735bf 35 /* CTRL MODIFIER */
mbed_official 0:a554658735bf 36 { 0, 0, 0, 0, 0, 0 /*0x05*/,
mbed_official 0:a554658735bf 37 0, 0, 0, 0, 0 /*0x0a*/,
mbed_official 0:a554658735bf 38 0, 0, 0, 0, 0/*0x0f*/,
mbed_official 0:a554658735bf 39 0, 0, 0, 0, 0/*0x14*/,
mbed_official 0:a554658735bf 40 0, 0, 0, 0, 0/*0x19*/,
mbed_official 0:a554658735bf 41 0, 0, 0, 0, 0/*0x1E*/,
mbed_official 0:a554658735bf 42 0, 0, 0, 0, 0/*0x23*/,
mbed_official 0:a554658735bf 43 0, 0, 0, 0, 0 /*enter*/, /*0x28*/
mbed_official 0:a554658735bf 44 0, 0, 0, 0, 0, /*0x2d*/
mbed_official 0:a554658735bf 45 0, 0, 0, 0, 0, /*0x32*/
mbed_official 0:a554658735bf 46 0, 0, 0, 0, 0, /*0x37*/
mbed_official 0:a554658735bf 47 0},
mbed_official 0:a554658735bf 48
mbed_official 0:a554658735bf 49 /* SHIFT MODIFIER */
mbed_official 0:a554658735bf 50 { 0, 0, 0, 0, 'A', 'B' /*0x05*/,
mbed_official 0:a554658735bf 51 'C', 'D', 'E', 'F', 'G' /*0x0a*/,
mbed_official 0:a554658735bf 52 'H', 'I', 'J', 'K', 'L'/*0x0f*/,
mbed_official 0:a554658735bf 53 'M', 'N', 'O', 'P', 'Q'/*0x14*/,
mbed_official 0:a554658735bf 54 'R', 'S', 'T', 'U', 'V'/*0x19*/,
mbed_official 0:a554658735bf 55 'W', 'X', 'Y', 'Z', '!'/*0x1E*/,
mbed_official 0:a554658735bf 56 '@', '#', '$', '%', '^'/*0x23*/,
mbed_official 0:a554658735bf 57 '&', '*', '(', ')', 0, /*0x28*/
mbed_official 0:a554658735bf 58 0, 0, 0, 0, 0, /*0x2d*/
mbed_official 0:a554658735bf 59 '+', '{', '}', '|', '~', /*0x32*/
mbed_official 0:a554658735bf 60 ':', '"', 0, '<', '>', /*0x37*/
mbed_official 0:a554658735bf 61 '?'},
mbed_official 0:a554658735bf 62
mbed_official 0:a554658735bf 63 /* ALT MODIFIER */
mbed_official 0:a554658735bf 64 { 0, 0, 0, 0, 0, 0 /*0x05*/,
mbed_official 0:a554658735bf 65 0, 0, 0, 0, 0 /*0x0a*/,
mbed_official 0:a554658735bf 66 0, 0, 0, 0, 0/*0x0f*/,
mbed_official 0:a554658735bf 67 0, 0, 0, 0, 0/*0x14*/,
mbed_official 0:a554658735bf 68 0, 0, 0, 0, 0/*0x19*/,
mbed_official 0:a554658735bf 69 0, 0, 0, 0, 0/*0x1E*/,
mbed_official 0:a554658735bf 70 0, 0, 0, 0, 0/*0x23*/,
mbed_official 0:a554658735bf 71 0, 0, 0, 0, 0 /*enter*/, /*0x28*/
mbed_official 0:a554658735bf 72 0, 0, 0, 0, 0, /*0x2d*/
mbed_official 0:a554658735bf 73 0, 0, 0, 0, 0, /*0x32*/
mbed_official 0:a554658735bf 74 0, 0, 0, 0, 0, /*0x37*/
mbed_official 0:a554658735bf 75 0}
mbed_official 0:a554658735bf 76
mbed_official 0:a554658735bf 77 };
mbed_official 0:a554658735bf 78
mbed_official 0:a554658735bf 79
mbed_official 0:a554658735bf 80 USBHostKeyboard::USBHostKeyboard() {
mbed_official 0:a554658735bf 81 host = USBHost::getHostInst();
mbed_official 0:a554658735bf 82 init();
mbed_official 0:a554658735bf 83 }
mbed_official 0:a554658735bf 84
mbed_official 0:a554658735bf 85
mbed_official 0:a554658735bf 86 void USBHostKeyboard::init() {
mbed_official 0:a554658735bf 87 dev = NULL;
mbed_official 0:a554658735bf 88 int_in = NULL;
mbed_official 0:a554658735bf 89 report_id = 0;
mbed_official 0:a554658735bf 90 onKey = NULL;
mbed_official 0:a554658735bf 91 onKeyCode = NULL;
mbed_official 0:a554658735bf 92 dev_connected = false;
mbed_official 0:a554658735bf 93 keyboard_intf = -1;
mbed_official 0:a554658735bf 94 keyboard_device_found = false;
mbed_official 0:a554658735bf 95 }
mbed_official 0:a554658735bf 96
mbed_official 0:a554658735bf 97 bool USBHostKeyboard::connected() {
mbed_official 0:a554658735bf 98 return dev_connected;
mbed_official 0:a554658735bf 99 }
mbed_official 0:a554658735bf 100
mbed_official 0:a554658735bf 101
mbed_official 0:a554658735bf 102 bool USBHostKeyboard::connect() {
mbed_official 24:868cbfe611a7 103
mbed_official 0:a554658735bf 104 if (dev_connected) {
mbed_official 0:a554658735bf 105 return true;
mbed_official 0:a554658735bf 106 }
mbed_official 24:868cbfe611a7 107
samux 5:e48791a1ef18 108 for (uint8_t i = 0; i < MAX_DEVICE_CONNECTED; i++) {
mbed_official 0:a554658735bf 109 if ((dev = host->getDevice(i)) != NULL) {
mbed_official 0:a554658735bf 110
mbed_official 0:a554658735bf 111 if (host->enumerate(dev, this))
mbed_official 0:a554658735bf 112 break;
mbed_official 24:868cbfe611a7 113
mbed_official 0:a554658735bf 114 if (keyboard_device_found) {
mbed_official 0:a554658735bf 115 int_in = dev->getEndpoint(keyboard_intf, INTERRUPT_ENDPOINT, IN);
mbed_official 24:868cbfe611a7 116
mbed_official 0:a554658735bf 117 if (!int_in)
mbed_official 0:a554658735bf 118 break;
mbed_official 24:868cbfe611a7 119
samux 4:b320d68e98e7 120 USB_INFO("New Keyboard device: VID:%04x PID:%04x [dev: %p - intf: %d]", dev->getVid(), dev->getPid(), dev, keyboard_intf);
samux 4:b320d68e98e7 121 dev->setName("Keyboard", keyboard_intf);
mbed_official 0:a554658735bf 122 host->registerDriver(dev, keyboard_intf, this, &USBHostKeyboard::init);
mbed_official 24:868cbfe611a7 123
mbed_official 0:a554658735bf 124 int_in->attach(this, &USBHostKeyboard::rxHandler);
mbed_official 0:a554658735bf 125 host->interruptRead(dev, int_in, report, int_in->getSize(), false);
mbed_official 24:868cbfe611a7 126
mbed_official 0:a554658735bf 127 dev_connected = true;
mbed_official 0:a554658735bf 128 return true;
mbed_official 0:a554658735bf 129 }
mbed_official 0:a554658735bf 130 }
mbed_official 0:a554658735bf 131 }
mbed_official 0:a554658735bf 132 init();
mbed_official 0:a554658735bf 133 return false;
mbed_official 0:a554658735bf 134 }
mbed_official 0:a554658735bf 135
mbed_official 0:a554658735bf 136 void USBHostKeyboard::rxHandler() {
mbed_official 0:a554658735bf 137 int len = int_in->getLengthTransferred();
mbed_official 0:a554658735bf 138 int index = (len == 9) ? 1 : 0;
mbed_official 0:a554658735bf 139 int len_listen = int_in->getSize();
mbed_official 0:a554658735bf 140 uint8_t key = 0;
mbed_official 0:a554658735bf 141 if (len == 8 || len == 9) {
mbed_official 0:a554658735bf 142 uint8_t modifier = (report[index] == 4) ? 3 : report[index];
mbed_official 0:a554658735bf 143 len_listen = len;
mbed_official 0:a554658735bf 144 key = keymap[modifier][report[index + 2]];
mbed_official 0:a554658735bf 145 if (key && onKey) {
mbed_official 0:a554658735bf 146 (*onKey)(key);
mbed_official 0:a554658735bf 147 }
samux 5:e48791a1ef18 148 if ((report[index + 2] || modifier) && onKeyCode) {
mbed_official 0:a554658735bf 149 (*onKeyCode)(report[index + 2], modifier);
mbed_official 0:a554658735bf 150 }
mbed_official 0:a554658735bf 151 }
samux 5:e48791a1ef18 152 if (dev && int_in)
mbed_official 0:a554658735bf 153 host->interruptRead(dev, int_in, report, len_listen, false);
mbed_official 0:a554658735bf 154 }
mbed_official 0:a554658735bf 155
mbed_official 0:a554658735bf 156 /*virtual*/ void USBHostKeyboard::setVidPid(uint16_t vid, uint16_t pid)
mbed_official 0:a554658735bf 157 {
mbed_official 0:a554658735bf 158 // we don't check VID/PID for keyboard driver
mbed_official 0:a554658735bf 159 }
mbed_official 0:a554658735bf 160
mbed_official 0:a554658735bf 161 /*virtual*/ bool USBHostKeyboard::parseInterface(uint8_t intf_nb, uint8_t intf_class, uint8_t intf_subclass, uint8_t intf_protocol) //Must return true if the interface should be parsed
mbed_official 0:a554658735bf 162 {
mbed_official 0:a554658735bf 163 if ((keyboard_intf == -1) &&
mbed_official 0:a554658735bf 164 (intf_class == HID_CLASS) &&
mbed_official 0:a554658735bf 165 (intf_subclass == 0x01) &&
mbed_official 0:a554658735bf 166 (intf_protocol == 0x01)) {
mbed_official 0:a554658735bf 167 keyboard_intf = intf_nb;
mbed_official 0:a554658735bf 168 return true;
mbed_official 0:a554658735bf 169 }
mbed_official 0:a554658735bf 170 return false;
mbed_official 0:a554658735bf 171 }
mbed_official 0:a554658735bf 172
mbed_official 0:a554658735bf 173 /*virtual*/ bool USBHostKeyboard::useEndpoint(uint8_t intf_nb, ENDPOINT_TYPE type, ENDPOINT_DIRECTION dir) //Must return true if the endpoint will be used
mbed_official 0:a554658735bf 174 {
mbed_official 0:a554658735bf 175 if (intf_nb == keyboard_intf) {
mbed_official 0:a554658735bf 176 if (type == INTERRUPT_ENDPOINT && dir == IN) {
mbed_official 0:a554658735bf 177 keyboard_device_found = true;
mbed_official 0:a554658735bf 178 return true;
mbed_official 0:a554658735bf 179 }
mbed_official 0:a554658735bf 180 }
mbed_official 0:a554658735bf 181 return false;
mbed_official 0:a554658735bf 182 }
mbed_official 0:a554658735bf 183
mbed_official 0:a554658735bf 184 #endif