RZ/A1H CMSIS-RTOS RTX BSP for GR-PEACH.
... more
Fork of
R_BSP
by Daiki Kato
« Back to documentation index
R_BSP_SsifDef.h File Reference
SSIF defines.
More...
Go to the source code of this file.
struct ssif_chcfg_romdec_t It's used for ROMDEC direct transfer mode and the call back function registration. More... struct ssif_channel_cfg_t This structure contains the configuration settings. More... enum ssif_chcfg_cks_t { SSIF_CFG_CKS_AUDIO_X1 = 0,
SSIF_CFG_CKS_AUDIO_CLK = 1,
SSIF_CFG_CKS_AUDIO_X1 = 0,
SSIF_CFG_CKS_AUDIO_CLK = 1
} SSICR:CKS(Clock source for oversampling)
More... enum ssif_chcfg_multi_ch_t { SSIF_CFG_MULTI_CH_1 = 0,
SSIF_CFG_MULTI_CH_2 = 1,
SSIF_CFG_MULTI_CH_3 = 2,
SSIF_CFG_MULTI_CH_4 = 3,
SSIF_CFG_MULTI_CH_1 = 0,
SSIF_CFG_MULTI_CH_2 = 1,
SSIF_CFG_MULTI_CH_3 = 2,
SSIF_CFG_MULTI_CH_4 = 3
SSICR:CHNL(Audio channels per system word)
More... enum ssif_chcfg_data_word_t { SSIF_CFG_DATA_WORD_8 = 0,
SSIF_CFG_DATA_WORD_16 = 1,
SSIF_CFG_DATA_WORD_18 = 2,
SSIF_CFG_DATA_WORD_20 = 3,
SSIF_CFG_DATA_WORD_22 = 4,
SSIF_CFG_DATA_WORD_24 = 5,
SSIF_CFG_DATA_WORD_32 = 6,
SSIF_CFG_DATA_WORD_8 = 0,
SSIF_CFG_DATA_WORD_16 = 1,
SSIF_CFG_DATA_WORD_18 = 2,
SSIF_CFG_DATA_WORD_20 = 3,
SSIF_CFG_DATA_WORD_22 = 4,
SSIF_CFG_DATA_WORD_24 = 5,
SSIF_CFG_DATA_WORD_32 = 6
SSICR:DWL(Data word length)
More... enum ssif_chcfg_system_word_t { SSIF_CFG_SYSTEM_WORD_8 = 0,
SSIF_CFG_SYSTEM_WORD_16 = 1,
SSIF_CFG_SYSTEM_WORD_24 = 2,
SSIF_CFG_SYSTEM_WORD_32 = 3,
SSIF_CFG_SYSTEM_WORD_48 = 4,
SSIF_CFG_SYSTEM_WORD_64 = 5,
SSIF_CFG_SYSTEM_WORD_128 = 6,
SSIF_CFG_SYSTEM_WORD_256 = 7,
SSIF_CFG_SYSTEM_WORD_8 = 0,
SSIF_CFG_SYSTEM_WORD_16 = 1,
SSIF_CFG_SYSTEM_WORD_24 = 2,
SSIF_CFG_SYSTEM_WORD_32 = 3,
SSIF_CFG_SYSTEM_WORD_48 = 4,
SSIF_CFG_SYSTEM_WORD_64 = 5,
SSIF_CFG_SYSTEM_WORD_128 = 6,
SSIF_CFG_SYSTEM_WORD_256 = 7
SSICR:SWL(System word length)
More... enum ssif_chcfg_clock_pol_t { SSIF_CFG_FALLING = 0,
SSIF_CFG_RISING = 1,
SSIF_CFG_FALLING = 0,
SSIF_CFG_RISING = 1
} SSICR:SCKP(Clock polarity)
More... enum ssif_chcfg_ws_pol_t { SSIF_CFG_WS_LOW = 0,
SSIF_CFG_WS_HIGH = 1,
SSIF_CFG_WS_LOW = 0,
SSIF_CFG_WS_HIGH = 1
} SSICR:SWSP(Word select polarity)
More... enum ssif_chcfg_padding_pol_t { SSIF_CFG_PADDING_LOW = 0,
SSIF_CFG_PADDING_HIGH = 1,
SSIF_CFG_PADDING_LOW = 0,
SSIF_CFG_PADDING_HIGH = 1
} SSICR:SPDP(Serial padding polarity)
More... enum ssif_chcfg_serial_alignment_t { SSIF_CFG_DATA_FIRST = 0,
SSIF_CFG_PADDING_FIRST = 1,
SSIF_CFG_DATA_FIRST = 0,
SSIF_CFG_PADDING_FIRST = 1
} SSICR:SDTA(Serial data alignment)
More... enum ssif_chcfg_parallel_alignment_t { SSIF_CFG_LEFT = 0,
SSIF_CFG_RIGHT = 1,
SSIF_CFG_LEFT = 0,
SSIF_CFG_RIGHT = 1
} SSICR:PDTA(Parallel data alignment)
More... enum ssif_chcfg_ws_delay_t { SSIF_CFG_DELAY = 0,
SSIF_CFG_NO_DELAY = 1,
SSIF_CFG_DELAY = 0,
SSIF_CFG_NO_DELAY = 1
} SSICR:DEL(Serial data delay)
More... enum ssif_chcfg_ckdv_t SSICR:CKDV(Serial oversampling clock division ratio)
More... enum ssif_chcfg_noise_cancel_t { SSIF_CFG_DISABLE_NOISE_CANCEL = 0,
SSIF_CFG_ENABLE_NOISE_CANCEL = 1,
SSIF_CFG_DISABLE_NOISE_CANCEL = 0,
SSIF_CFG_ENABLE_NOISE_CANCEL = 1
} SNCR:SSIxNL(Serial sound interface channel x noise canceler enable)
More... enum ssif_chcfg_tdm_t { SSIF_CFG_DISABLE_TDM = 0,
SSIF_CFG_ENABLE_TDM = 1,
SSIF_CFG_DISABLE_TDM = 0,
SSIF_CFG_ENABLE_TDM = 1
} SSITDMR:TDM(TDM mode)
More...
Detailed Description
SSIF defines.
Definition in file R_BSP_SsifDef.h .
Enumeration Type Documentation
SSICR:CKDV(Serial oversampling clock division ratio)
Definition at line 144 of file R_BSP_SsifDef.h .
SSICR:CKS(Clock source for oversampling)
Enumerator:
select AUDIO_X1
select AUIDIO_CLK
Definition at line 61 of file R_BSP_SsifDef.h .
SSICR:SCKP(Clock polarity)
Enumerator:
Falling edge.
Rising edge.
Definition at line 102 of file R_BSP_SsifDef.h .
SSICR:DWL(Data word length)
Enumerator:
Data word length 8.
Data word length 16.
Data word length 18.
Data word length 20.
Data word length 22.
Data word length 24.
Data word length 32.
Definition at line 77 of file R_BSP_SsifDef.h .
SSICR:CHNL(Audio channels per system word)
Enumerator:
1ch within systemword (on tdm=0)
2ch within systemword (on tdm=0)
3ch within systemword (on tdm=0)
4ch within systemword (on tdm=0)
Definition at line 68 of file R_BSP_SsifDef.h .
SNCR:SSIxNL(Serial sound interface channel x noise canceler enable)
Enumerator:
Not use noise cancel function.
Use noise cancel function.
Definition at line 163 of file R_BSP_SsifDef.h .
SSICR:SPDP(Serial padding polarity)
Enumerator:
Padding bits are low.
Padding bits are high.
Definition at line 116 of file R_BSP_SsifDef.h .
SSICR:PDTA(Parallel data alignment)
Enumerator:
Left aligned.
Right aligned.
Definition at line 130 of file R_BSP_SsifDef.h .
SSICR:SDTA(Serial data alignment)
Enumerator:
Data first.
Padding bits first.
Definition at line 123 of file R_BSP_SsifDef.h .
SSICR:SWL(System word length)
Enumerator:
System word length 8.
System word length 16.
System word length 24.
System word length 32.
System word length 48.
System word length 64.
System word length 128.
System word length 256.
Definition at line 89 of file R_BSP_SsifDef.h .
SSITDMR:TDM(TDM mode)
Enumerator:
not TDM mode
set TDM mode
Definition at line 171 of file R_BSP_SsifDef.h .
SSICR:DEL(Serial data delay)
Enumerator:
1 clock delay
No delay.
Definition at line 137 of file R_BSP_SsifDef.h .
SSICR:SWSP(Word select polarity)
Enumerator:
Low for ther 1st channel(not TDM)
High for the 1st channel(not TDM)
Definition at line 109 of file R_BSP_SsifDef.h .
Renesas
Daiki Kato
1.7.2