Diff: inc/lcd_analog_rgb_ch0.h

Revision:

0:853f5b7408a7

diff -r 000000000000 -r 853f5b7408a7 inc/lcd_analog_rgb_ch0.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/inc/lcd_analog_rgb_ch0.h	Fri Jun 26 02:17:53 2015 +0000
@@ -0,0 +1,95 @@
+/*******************************************************************************
+* DISCLAIMER
+* This software is supplied by Renesas Electronics Corporation and is only
+* intended for use with Renesas products. No other uses are authorized. This
+* software is owned by Renesas Electronics Corporation and is protected under
+* all applicable laws, including copyright laws.
+* THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
+* THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
+* LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+* AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
+* TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
+* ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
+* FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
+* ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
+* BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
+* Renesas reserves the right, without notice, to make changes to this software
+* and to discontinue the availability of this software. By using this software,
+* you agree to the additional terms and conditions found by accessing the
+* following link:
+* http://www.renesas.com/disclaimer
+* Copyright (C) 2012 - 2015 Renesas Electronics Corporation. All rights reserved.
+*******************************************************************************/
+/**************************************************************************//**
+* @file         lcd_analog_rgb_ch0.h
+* @version      1.00
+* $Rev: 199 $
+* $Date:: 2014-05-23 16:33:52 +0900#$
+* @brief        LCD panel for vdc5 channel 0 definition header
+******************************************************************************/
+
+#ifndef LCD_ANALOG_RGB_CH0_H
+#define LCD_ANALOG_RGB_CH0_H
+
+#ifndef LCD_PANEL_H
+#error  Do not include this file directly!
+#else
+/******************************************************************************
+Includes   <System Includes> , "Project Includes"
+******************************************************************************/
+#include    <stdlib.h>
+
+#include    "r_typedefs.h"
+
+#include    "r_vdc5.h"
+
+#include    "lcd_analog_rgb.h"
+
+
+/******************************************************************************
+Macro definitions
+******************************************************************************/
+/* Option board (part number: RTK7721000B00000BR)
+    ADV7123 (Video DAC), U8
+    Analog RGB D-sub15 (RGB888), J15 */
+#define     LCD_CH0_S_HSYNC         (0u)                        /* Hsync start position */
+#define     LCD_CH0_W_HSYNC         (LCD_SVGA_H_SYNC_WIDTH)     /* Hsync width */
+#define     LCD_CH0_POL_HSYNC       (LCD_SVGA_H_POLARITY)       /* Polarity of Hsync pulse */
+/* LCD display area size, horizontal start position */
+#define     LCD_CH0_DISP_HS         (LCD_SVGA_H_SYNC_WIDTH + LCD_SVGA_H_BACK_PORCH)
+#define     LCD_CH0_DISP_HW         (LCD_SVGA_H_VISIBLE_AREA)   /* LCD display area size, horizontal width */
+
+/* Vsync start position */
+#define     LCD_CH0_S_VSYNC         (LCD_SVGA_V_BACK_PORCH + LCD_SVGA_V_VISIBLE_AREA + LCD_SVGA_V_FRONT_PORCH)
+#define     LCD_CH0_W_VSYNC         (LCD_SVGA_V_SYNC_WIDTH)     /* Vsync width */
+#define     LCD_CH0_POL_VSYNC       (LCD_SVGA_V_POLARITY)       /* Polarity of Vsync pulse */
+#define     LCD_CH0_DISP_VS         (LCD_SVGA_V_BACK_PORCH)     /* LCD display area size, vertical start position */
+#define     LCD_CH0_DISP_VW         (LCD_SVGA_V_VISIBLE_AREA)   /* LCD display area size, height (vertical width) */
+
+#define     LCD_CH0_SIG_FV          (LCD_SVGA_V_TOTAL - 1u)     /* Free-running Vsync period */
+#define     LCD_CH0_SIG_FH          (LCD_SVGA_H_TOTAL - 1u)     /* Hsync period */
+/* Pixel data is latched in the rising edge of pixel clock on ADV7123.
+   Therefore, pixel data should be output from VDC5 at the falling edge of the clock. */
+#define     LCD_CH0_OUT_EDGE        VDC5_EDGE_FALLING           /* Output phase control of LCD_DATA[23:0] signal */
+#define     LCD_CH0_OUT_FORMAT      VDC5_LCD_OUTFORMAT_RGB888   /* LCD output format select */
+
+#define     LCD_CH0_PANEL_CLK       VDC5_PANEL_ICKSEL_LVDS      /* Panel clock select */
+#define     LCD_CH0_PANEL_CLK_DIV   VDC5_PANEL_CLKDIV_1_1       /* Panel clock frequency division ratio */
+
+#define     LCD_CH0_TCON_HALF       (LCD_CH0_SIG_FH / 2u)       /* TCON reference timing, 1/2fH timing */
+#define     LCD_CH0_TCON_OFFSET     (0u)                        /* TCON reference timing, offset Hsync signal timing */
+
+
+/******************************************************************************
+Typedef definitions
+******************************************************************************/
+
+/******************************************************************************
+Exported global functions (to be accessed by other files)
+******************************************************************************/
+void GRAPHICS_SetLcdPanel_Ch0(void);
+void GRAPHICS_SetLcdTconSettings_Ch0(const vdc5_lcd_tcon_timing_t * * const outctrl);
+
+
+#endif  /* LCD_PANEL_H not defined */
+#endif  /* LCD_ANALOG_RGB_CH0_H */