Video library for GR-PEACH
Dependents: Trace_Program2 GR-PEACH_Camera_in_barcode GR-PEACH_LCD_sample GR-PEACH_LCD_4_3inch_sample ... more
Video library for GR-PEACH.
Hello World!
Import programGR-PEACH_Camera_in
Camera in sample for GR-PEACH. This sample works on GR-LYCHEE besides GR-PEACH.
API
Import library
Interface
See the Pinout page for more details
common/lcd_panel/lcd_analog_rgb_ch1.c
- Committer:
- dkato
- Date:
- 2016-06-30
- Revision:
- 4:aeefe5171463
- Parent:
- 0:853f5b7408a7
File content as of revision 4:aeefe5171463:
/******************************************************************************* * DISCLAIMER * This software is supplied by Renesas Electronics Corporation and is only * intended for use with Renesas products. No other uses are authorized. This * software is owned by Renesas Electronics Corporation and is protected under * all applicable laws, including copyright laws. * THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING * THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT * LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE * AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED. * TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS * ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE * FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR * ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE * BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. * Renesas reserves the right, without notice, to make changes to this software * and to discontinue the availability of this software. By using this software, * you agree to the additional terms and conditions found by accessing the * following link: * http://www.renesas.com/disclaimer * Copyright (C) 2012 - 2015 Renesas Electronics Corporation. All rights reserved. *******************************************************************************/ /**************************************************************************//** * @file lcd_analog_rgb_ch1.c * @version 1.00 * $Rev: 199 $ * $Date:: 2014-05-23 16:33:52 +0900#$ * @brief LCD panel for vdc5 channel 1 function ******************************************************************************/ /****************************************************************************** Includes <System Includes> , "Project Includes" ******************************************************************************/ #include <string.h> #include "r_typedefs.h" #include "r_vdc5.h" #include "iodefine.h" #include "lcd_panel.h" #if (LCD_VDC5_CH1_PANEL==1) /****************************************************************************** Macro definitions ******************************************************************************/ /* Port 4 */ #define LCD_PORT4_2ND (0x5400u) /* Port 9 */ #define LCD_PORT9_1ST (0x00FCu) /* Port 5 */ #define LCD_PORT5_7TH (0x0600u) #define LCD_PORT5_2ND (0x00FFu) /* Port 2 */ #define LCD_PORT2_7TH (0xF000u) #define LCD_PORT2_6TH (0x0F00u) #define FH_1_2_CYCLE (2u) /****************************************************************************** Typedef definitions ******************************************************************************/ /****************************************************************************** Imported global variables and functions (from other files) ******************************************************************************/ /****************************************************************************** Exported global variables (to be accessed by other files) ******************************************************************************/ /****************************************************************************** Private global variables and functions ******************************************************************************/ /**************************************************************************//** * @brief LCD panel I/O port setup (VDC5 channel 1) * @param[in] void * @retval None ******************************************************************************/ void GRAPHICS_SetLcdPanel_Ch1 (void) { volatile uint32_t dummy_read; uint32_t reg_data; /* Analog RGB D-sub15 (RGB888) VSYNC : LCD1_TCON1 ... P4_14, 2nd alternative function : LCD1_CLK ... P4_12, 2nd alternative function HSYNC : LCD1_TCON5 ... P4_10, 2nd alternative function LCD1_DATA R[7:0] : LCD1_DATA[23:18] ... P9_7 ~ P9_2, 1st alternative function : [17:16] ... P5_10 ~ P5_9, 7th alternative function G[7:0] : LCD1_DATA[15:12] ... P2_15 ~ P2_12, 7th alternative function : [11:8] ... P2_11 ~ P2_8, 6th alternative function B[7:0] : LCD1_DATA[7:0] ... P5_7 ~ P5_0, 2nd alternative function */ /* Port 4 */ reg_data = (uint32_t)GPIO.PMC4 & (uint32_t)~LCD_PORT4_2ND; GPIO.PMC4 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PMC4; dummy_read = reg_data; /* PFCAE4, PFCE4, PFC4 ... 2nd alternative function PIPC4, PMC4 b14 : P4_14 b12 : P4_12 b10 : P4_10 */ reg_data = (uint32_t)GPIO.PFCAE4 & (uint32_t)~LCD_PORT4_2ND; GPIO.PFCAE4 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PFCE4 & (uint32_t)~LCD_PORT4_2ND; GPIO.PFCE4 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PFC4 | (uint32_t)LCD_PORT4_2ND; GPIO.PFC4 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PIPC4 | (uint32_t)LCD_PORT4_2ND; GPIO.PIPC4 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PMC4 | (uint32_t)LCD_PORT4_2ND; GPIO.PMC4 = (uint16_t)reg_data; /* Port 9 */ reg_data = (uint32_t)GPIO.PMC9 & (uint32_t)~LCD_PORT9_1ST; GPIO.PMC9 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PMC9; dummy_read = reg_data; /* PFCAE9, PFCE9, PFC9 ... 1st alternative function PIPC9, PMC9 b7:b2 : P9_7 ~ P9_2 */ reg_data = (uint32_t)GPIO.PFCAE9 & (uint32_t)~LCD_PORT9_1ST; GPIO.PFCAE9 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PFCE9 & (uint32_t)~LCD_PORT9_1ST; GPIO.PFCE9 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PFC9 & (uint32_t)~LCD_PORT9_1ST; GPIO.PFC9 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PIPC9 | (uint32_t)LCD_PORT9_1ST; GPIO.PIPC9 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PMC9 | (uint32_t)LCD_PORT9_1ST; GPIO.PMC9 = (uint16_t)reg_data; /* Port 5 */ reg_data = (uint32_t)GPIO.PMC5 & (uint32_t)~(LCD_PORT5_7TH|LCD_PORT5_2ND); GPIO.PMC5 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PMC5; dummy_read = reg_data; /* PFCAE5, PFCE5, PFC5 ... 7th alternative function b10:b9 : P5_10 ~ P5_9 */ reg_data = (uint32_t)GPIO.PFCAE5 | (uint32_t)LCD_PORT5_7TH; GPIO.PFCAE5 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PFCE5 | (uint32_t)LCD_PORT5_7TH; GPIO.PFCE5 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PFC5 & (uint32_t)~LCD_PORT5_7TH; GPIO.PFC5 = (uint16_t)reg_data; /* PFCAE5, PFCE5, PFC5 ... 2nd alternative function b7:b0 : P5_7 ~ P5_0 */ reg_data = (uint32_t)GPIO.PFCAE5 & (uint32_t)~LCD_PORT5_2ND; GPIO.PFCAE5 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PFCE5 & (uint32_t)~LCD_PORT5_2ND; GPIO.PFCE5 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PFC5 | (uint32_t)LCD_PORT5_2ND; GPIO.PFC5 = (uint16_t)reg_data; /* PIPC5, PMC5 b10:b9 : P5_10 ~ P5_9 b7:b0 : P5_7 ~ P5_0 */ reg_data = (uint32_t)GPIO.PIPC5 | (uint32_t)(LCD_PORT5_7TH|LCD_PORT5_2ND); GPIO.PIPC5 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PMC5 | (uint32_t)(LCD_PORT5_7TH|LCD_PORT5_2ND); GPIO.PMC5 = (uint16_t)reg_data; /* Port 2 */ reg_data = (uint32_t)GPIO.PMC2 & (uint32_t)~(LCD_PORT2_7TH|LCD_PORT2_6TH); GPIO.PMC2 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PMC2; dummy_read = reg_data; /* PFCAE2, PFCE2, PFC2 ... 7th alternative function b15:b12 : P2_15 ~ P2_12 */ reg_data = (uint32_t)GPIO.PFCAE2 | (uint32_t)LCD_PORT2_7TH; GPIO.PFCAE2 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PFCE2 | (uint32_t)LCD_PORT2_7TH; GPIO.PFCE2 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PFC2 & (uint32_t)~LCD_PORT2_7TH; GPIO.PFC2 = (uint16_t)reg_data; /* PFCAE2, PFCE2, PFC2 ... 6th alternative function b11:b8 : P2_11 ~ P2_8 */ reg_data = (uint32_t)GPIO.PFCAE2 | (uint32_t)LCD_PORT2_6TH; GPIO.PFCAE2 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PFCE2 & (uint32_t)~LCD_PORT2_6TH; GPIO.PFCE2 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PFC2 | (uint32_t)LCD_PORT2_6TH; GPIO.PFC2 = (uint16_t)reg_data; /* PIPC2, PMC2 b15:b8 : P2_15 ~ P2_8 */ reg_data = (uint32_t)GPIO.PIPC2 | (uint32_t)(LCD_PORT2_7TH|LCD_PORT2_6TH); GPIO.PIPC2 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PMC2 | (uint32_t)(LCD_PORT2_7TH|LCD_PORT2_6TH); GPIO.PMC2 = (uint16_t)reg_data; } /* End of function GRAPHICS_SetLcdPanel_Ch1() */ /**************************************************************************//** * @brief LCD TCON setup parameter acquisition processing (VDC5 channel 1) * @param[out] outctrl : Address of the area for storing the LCD TCON timing setup data table * @retval None ******************************************************************************/ void GRAPHICS_SetLcdTconSettings_Ch1 (const vdc5_lcd_tcon_timing_t * * const outctrl) { /* Analog RGB D-sub15 (RGB888), SVGA signal 800x600 */ /* TCON timing setting, VS */ static const vdc5_lcd_tcon_timing_t lcd_tcon_timing_VS = { (uint16_t)(LCD_CH1_S_VSYNC * FH_1_2_CYCLE), /* Signal pulse start position */ (uint16_t)(LCD_CH1_W_VSYNC * FH_1_2_CYCLE), /* Pulse width */ VDC5_LCD_TCON_POLMD_NORMAL, VDC5_LCD_TCON_REFSEL_HSYNC, LCD_CH1_POL_VSYNC, /* Polarity inversion control of signal */ VDC5_LCD_TCON_PIN_1, /* Output pin for LCD driving signal */ LCD_CH1_OUT_EDGE /* Output phase control of signal */ }; /* TCON timing setting, HS */ static const vdc5_lcd_tcon_timing_t lcd_tcon_timing_HS = { (uint16_t)LCD_CH1_S_HSYNC, /* Signal pulse start position */ (uint16_t)LCD_CH1_W_HSYNC, /* Pulse width */ VDC5_LCD_TCON_POLMD_NORMAL, VDC5_LCD_TCON_REFSEL_HSYNC, /* Signal operating reference select */ LCD_CH1_POL_HSYNC, /* Polarity inversion control of signal */ VDC5_LCD_TCON_PIN_5, /* Output pin for LCD driving signal */ LCD_CH1_OUT_EDGE /* Output phase control of signal */ }; if (outctrl != NULL) { outctrl[VDC5_LCD_TCONSIG_STVA_VS] = &lcd_tcon_timing_VS; /* STVA/VS: Vsync */ outctrl[VDC5_LCD_TCONSIG_STVB_VE] = NULL; /* STVB/VE: Not used */ outctrl[VDC5_LCD_TCONSIG_STH_SP_HS] = &lcd_tcon_timing_HS; /* STH/SP/HS: Hsync */ outctrl[VDC5_LCD_TCONSIG_STB_LP_HE] = NULL; /* STB/LP/HE: Not used */ outctrl[VDC5_LCD_TCONSIG_CPV_GCK] = NULL; /* CPV/GCK: Not used */ outctrl[VDC5_LCD_TCONSIG_POLA] = NULL; /* POLA: Not used */ outctrl[VDC5_LCD_TCONSIG_POLB] = NULL; /* POLB: Not used */ outctrl[VDC5_LCD_TCONSIG_DE] = NULL; /* DE: Not used */ } } /* End of function GRAPHICS_SetLcdTconSettings_Ch1() */ #endif /* LCD_VDC5_CH1_PANEL==LCD_CH1_PANEL_ANALOG_RGB */