Video library for GR-PEACH
Dependents: Trace_Program2 GR-PEACH_Camera_in_barcode GR-PEACH_LCD_sample GR-PEACH_LCD_4_3inch_sample ... more
Video library for GR-PEACH.
Hello World!
Import programGR-PEACH_Camera_in
Camera in sample for GR-PEACH. This sample works on GR-LYCHEE besides GR-PEACH.
API
Import library
Interface
See the Pinout page for more details
common/lcd_panel/lcd_analog_rgb_ch0.c
- Committer:
- dkato
- Date:
- 2016-06-30
- Revision:
- 4:aeefe5171463
- Parent:
- 0:853f5b7408a7
File content as of revision 4:aeefe5171463:
/******************************************************************************* * DISCLAIMER * This software is supplied by Renesas Electronics Corporation and is only * intended for use with Renesas products. No other uses are authorized. This * software is owned by Renesas Electronics Corporation and is protected under * all applicable laws, including copyright laws. * THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING * THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT * LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE * AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED. * TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS * ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE * FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR * ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE * BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. * Renesas reserves the right, without notice, to make changes to this software * and to discontinue the availability of this software. By using this software, * you agree to the additional terms and conditions found by accessing the * following link: * http://www.renesas.com/disclaimer * Copyright (C) 2012 - 2015 Renesas Electronics Corporation. All rights reserved. *******************************************************************************/ /**************************************************************************//** * @file lcd_analog_rgb_ch0.c * @version 1.00 * $Rev: 199 $ * $Date:: 2014-05-23 16:33:52 +0900#$ * @brief LCD panel for vdc5 channel 0 function ******************************************************************************/ /****************************************************************************** Includes <System Includes> , "Project Includes" ******************************************************************************/ #include <string.h> #include "r_typedefs.h" #include "r_vdc5.h" #include "iodefine.h" #include "lcd_panel.h" #if (LCD_VDC5_CH0_PANEL==1) /****************************************************************************** Macro definitions ******************************************************************************/ /* Port 11 */ #define LCD_PORT11_5TH (0xE0FFu) /* Port 10 */ #define LCD_PORT10_5TH (0xFFFFu) #define FH_1_2_CYCLE (2u) /****************************************************************************** Typedef definitions ******************************************************************************/ /****************************************************************************** Imported global variables and functions (from other files) ******************************************************************************/ /****************************************************************************** Exported global variables (to be accessed by other files) ******************************************************************************/ /****************************************************************************** Private global variables and functions ******************************************************************************/ /**************************************************************************//** * @brief LCD panel I/O port setup (VDC5 channel 0) * @param[in] void * @retval None ******************************************************************************/ void GRAPHICS_SetLcdPanel_Ch0 (void) { volatile uint32_t dummy_read; uint32_t reg_data; /* Analog RGB D-sub15 (RGB888) : LCD0_CLK ... P11_15, 5th alternative function HSYNC : LCD0_TCON0 ... P11_14, 5th alternative function VSYNC : LCD0_TCON1 ... P11_13, 5th alternative function LCD0_DATA R[7:0] : LCD0_DATA[23:16] ... P10_0 ~ P10_7, 5th alternative function G[7:0] : LCD0_DATA[15:8] ... P10_8 ~ P10_15, 5th alternative function B[7:0] : LCD0_DATA[7:0] ... P11_0 ~ P11_7, 5th alternative function */ /* Port 11 */ reg_data = (uint32_t)GPIO.PMC11 & (uint32_t)~LCD_PORT11_5TH; GPIO.PMC11 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PMC11; dummy_read = reg_data; /* PFCAE11, PFCE11, PFC11 ... 5th alternative function PIPC11, PMC11 b15:b13 : P11_15 ~ P11_13 b7:b0 : P11_7 ~ P11_0 */ reg_data = (uint32_t)GPIO.PFCAE11 | (uint32_t)LCD_PORT11_5TH; GPIO.PFCAE11 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PFCE11 & (uint32_t)~LCD_PORT11_5TH; GPIO.PFCE11 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PFC11 & (uint32_t)~LCD_PORT11_5TH; GPIO.PFC11 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PIPC11 | (uint32_t)LCD_PORT11_5TH; GPIO.PIPC11 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PMC11 | (uint32_t)LCD_PORT11_5TH; GPIO.PMC11 = (uint16_t)reg_data; /* Port 10 */ reg_data = (uint32_t)GPIO.PMC10 & (uint32_t)~LCD_PORT10_5TH; GPIO.PMC10 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PMC10; dummy_read = reg_data; /* PFCAE10, PFCE10, PFC10 ... 5th alternative function PIPC10, PMC10 b15:b0 : P10_15 ~ P10_0 */ reg_data = (uint32_t)GPIO.PFCAE10 | (uint32_t)LCD_PORT10_5TH; GPIO.PFCAE10 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PFCE10 & (uint32_t)~LCD_PORT10_5TH; GPIO.PFCE10 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PFC10 & (uint32_t)~LCD_PORT10_5TH; GPIO.PFC10 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PIPC10 | (uint32_t)LCD_PORT10_5TH; GPIO.PIPC10 = (uint16_t)reg_data; reg_data = (uint32_t)GPIO.PMC10 | (uint32_t)LCD_PORT10_5TH; GPIO.PMC10 = (uint16_t)reg_data; } /* End of function GRAPHICS_SetLcdPanel_Ch0() */ /**************************************************************************//** * @brief LCD TCON setup parameter acquisition processing (VDC5 channel 0) * @param[out] outctrl : Address of the area for storing the LCD TCON timing setup data table * @retval None ******************************************************************************/ void GRAPHICS_SetLcdTconSettings_Ch0 (const vdc5_lcd_tcon_timing_t * * const outctrl) { /* Analog RGB D-sub15 (RGB888), SVGA signal 800x600 */ /* TCON timing setting, VS */ static const vdc5_lcd_tcon_timing_t lcd_tcon_timing_VS = { (uint16_t)(LCD_CH0_S_VSYNC * FH_1_2_CYCLE), /* Signal pulse start position */ (uint16_t)(LCD_CH0_W_VSYNC * FH_1_2_CYCLE), /* Pulse width */ VDC5_LCD_TCON_POLMD_NORMAL, VDC5_LCD_TCON_REFSEL_HSYNC, LCD_CH0_POL_VSYNC, /* Polarity inversion control of signal */ VDC5_LCD_TCON_PIN_1, /* Output pin for LCD driving signal */ LCD_CH0_OUT_EDGE /* Output phase control of signal */ }; /* TCON timing setting, HS */ static const vdc5_lcd_tcon_timing_t lcd_tcon_timing_HS = { (uint16_t)LCD_CH0_S_HSYNC, /* Signal pulse start position */ (uint16_t)LCD_CH0_W_HSYNC, /* Pulse width */ VDC5_LCD_TCON_POLMD_NORMAL, VDC5_LCD_TCON_REFSEL_HSYNC, /* Signal operating reference select */ LCD_CH0_POL_HSYNC, /* Polarity inversion control of signal */ VDC5_LCD_TCON_PIN_0, /* Output pin for LCD driving signal */ LCD_CH0_OUT_EDGE /* Output phase control of signal */ }; if (outctrl != NULL) { outctrl[VDC5_LCD_TCONSIG_STVA_VS] = &lcd_tcon_timing_VS; /* STVA/VS: Vsync */ outctrl[VDC5_LCD_TCONSIG_STVB_VE] = NULL; /* STVB/VE: Not used */ outctrl[VDC5_LCD_TCONSIG_STH_SP_HS] = &lcd_tcon_timing_HS; /* STH/SP/HS: Hsync */ outctrl[VDC5_LCD_TCONSIG_STB_LP_HE] = NULL; /* STB/LP/HE: Not used */ outctrl[VDC5_LCD_TCONSIG_CPV_GCK] = NULL; /* CPV/GCK: Not used */ outctrl[VDC5_LCD_TCONSIG_POLA] = NULL; /* POLA: Not used */ outctrl[VDC5_LCD_TCONSIG_POLB] = NULL; /* POLB: Not used */ outctrl[VDC5_LCD_TCONSIG_DE] = NULL; /* DE: Not used */ } } /* End of function GRAPHICS_SetLcdTconSettings_Ch0() */ #endif /* LCD_VDC5_CH0_PANEL==LCD_CH0_PANEL_ANALOG_RGB */