Renesas / GR-PEACH_video

Video library for GR-PEACH

Dependents:   Trace_Program2 GR-PEACH_Camera_in_barcode GR-PEACH_LCD_sample GR-PEACH_LCD_4_3inch_sample ... more

Video ｌibrary for GR-PEACH.

Hello World!

Import programGR-PEACH_Camera_in

Camera in sample for GR-PEACH. This sample works on GR-LYCHEE besides GR-PEACH.

Last commit 28 Dec 2018 by Renesas

API

Import library
GR-PEACH_video - DisplayBase Class Reference

Data Structures

struct lcd_config_t
LCD configuration. More...
struct rect_t
The relative position within the graphics display area. More...
struct video_ext_in_config_t
Digital Video Input configuration. More...

Public Types

enum video_input_channel_t { VIDEO_INPUT_CHANNEL_0 = 0, VIDEO_INPUT_CHANNEL_1 }

Video input channel select.

More...
enum graphics_layer_t { GRAPHICS_LAYER_0 = 0, GRAPHICS_LAYER_1 , GRAPHICS_LAYER_2 , GRAPHICS_LAYER_3 }

Graphics layer select.

More...
enum graphics_error_t {
GRAPHICS_OK = 0, GRAPHICS_VDC5_ERR = -1, GRAPHICS_FORMA_ERR = -2, GRAPHICS_LAYER_ERR = -3,
GRAPHICS_CHANNLE_ERR = -4, GRAPHICS_VIDEO_NTSC_SIZE_ERR = -5, GRAPHICS_VIDEO_PAL_SIZE_ERR = -6, GRAPHICS_PARAM_RANGE_ERR = -7
}

Error codes.

More...
enum graphics_format_t { GRAPHICS_FORMAT_YCBCR422 = 0, GRAPHICS_FORMAT_RGB565 , GRAPHICS_FORMAT_RGB888 , GRAPHICS_FORMAT_ARGB8888 }

Graphics layer read format selects.

More...
enum video_format_t { VIDEO_FORMAT_YCBCR422 = 0, VIDEO_FORMAT_RGB565 , VIDEO_FORMAT_RGB888 }

Video writing format selects.

More...
enum wr_rd_swa_t {
WR_RD_WRSWA_NON = 0, WR_RD_WRSWA_8BIT , WR_RD_WRSWA_16BIT , WR_RD_WRSWA_16_8BIT ,
WR_RD_WRSWA_32BIT , WR_RD_WRSWA_32_8BIT , WR_RD_WRSWA_32_16BIT , WR_RD_WRSWA_32_16_8BIT
}

Frame buffer swap setting.

More...
enum lcd_tcon_pin_t { LCD_TCON_PIN_NON = -1, LCD_TCON_PIN_0 , LCD_TCON_PIN_1 , LCD_TCON_PIN_2 }

LCD tcon output pin selects.

More...
enum lcd_outformat_t { LCD_OUTFORMAT_RGB888 = 0, LCD_OUTFORMAT_RGB666 , LCD_OUTFORMAT_RGB565 }

LCD output format selects.

More...
enum edge_t { EDGE_RISING = 0, EDGE_FALLING = 1 }

Edge of a signal.

More...
enum lcd_type_t { LCD_TYPE_LVDS = 0, LCD_TYPE_PARALLEL_RGB }

LCD type.

More...
enum sig_pol_t { SIG_POL_NOT_INVERTED = 0, SIG_POL_INVERTED }

Polarity of a signal.

More...
enum int_type_t {
INT_TYPE_S0_VI_VSYNC = 0, INT_TYPE_S0_LO_VSYNC , INT_TYPE_S0_VSYNCERR , INT_TYPE_VLINE ,
INT_TYPE_S0_VFIELD , INT_TYPE_IV1_VBUFERR , INT_TYPE_IV3_VBUFERR , INT_TYPE_IV5_VBUFERR ,
INT_TYPE_IV6_VBUFERR , INT_TYPE_S0_WLINE , INT_TYPE_S1_VI_VSYNC , INT_TYPE_S1_LO_VSYNC ,
INT_TYPE_S1_VSYNCERR , INT_TYPE_S1_VFIELD , INT_TYPE_IV2_VBUFERR , INT_TYPE_IV4_VBUFERR ,
INT_TYPE_S1_WLINE , INT_TYPE_OIR_VI_VSYNC , INT_TYPE_OIR_LO_VSYNC , INT_TYPE_OIR_VLINE ,
INT_TYPE_OIR_VFIELD , INT_TYPE_IV7_VBUFERR , INT_TYPE_IV8_VBUFERR , INT_TYPE_NUM
}

Interrupt type.

More...
enum graphics_video_col_sys_t {
COL_SYS_NTSC_358 = 0, COL_SYS_NTSC_443 = 1, COL_SYS_PAL_443 = 2, COL_SYS_PAL_M = 3,
COL_SYS_PAL_N = 4, COL_SYS_SECAM = 5, COL_SYS_NTSC_443_60 = 6, COL_SYS_PAL_60 = 7
}

Video color system.

More...
enum video_input_sel_t { INPUT_SEL_VDEC = 0, INPUT_SEL_EXT = 1 }

External Input select.

More...
enum video_extin_format_t {
VIDEO_EXTIN_FORMAT_RGB888 = 0, VIDEO_EXTIN_FORMAT_RGB666 , VIDEO_EXTIN_FORMAT_RGB565 , VIDEO_EXTIN_FORMAT_BT656 ,
VIDEO_EXTIN_FORMAT_BT601 , VIDEO_EXTIN_FORMAT_YCBCR422 , VIDEO_EXTIN_FORMAT_YCBCR444
}

External input format select.

More...
enum onoff_t { OFF = 0, ON = 1 }

On/off.

More...
enum extin_input_line_t { EXTIN_LINE_525 = 0, EXTIN_LINE_625 = 1 }

Number of lines for BT.656 external input.

More...
enum extin_h_pos_t { EXTIN_H_POS_CBYCRY = 0, EXTIN_H_POS_YCRYCB , EXTIN_H_POS_CRYCBY , EXTIN_H_POS_YCBYCR }

Y/Cb/Y/Cr data string start timing.

More...

Public Member Functions

DisplayBase (void)
Constructor method of display base object.
graphics_error_t Graphics_init ( lcd_config_t *lcd_config)
Graphics initialization processing
If not using display, set NULL in parameter.
graphics_error_t Graphics_Video_init ( video_input_sel_t video_input_sel, video_ext_in_config_t *video_ext_in_config)
Graphics Video initialization processing
If setting INPUT_SEL_VDEC in video_input_sel parameter, set NULL in video_ext_in_config parameter.
graphics_error_t Graphics_Lcd_Port_Init (PinName *pin, unsigned int pin_count)
LCD output port initialization processing.
graphics_error_t Graphics_Lvds_Port_Init (PinName *pin, unsigned int pin_count)
LVDS output port initialization processing.
graphics_error_t Graphics_Dvinput_Port_Init (PinName *pin, unsigned int pin_count)
Digital video input port initialization processing.
graphics_error_t Graphics_Irq_Handler_Set ( int_type_t Graphics_Irq_Handler_Set, unsigned short num, void(*callback)( int_type_t ))
Interrupt callback setup This function performs the following processing:

  • Enables the interrupt when the pointer to the corresponding interrupt callback function is specified.

graphics_error_t Graphics_Start ( graphics_layer_t layer_id)
Start the graphics surface read process.
graphics_error_t Graphics_Stop ( graphics_layer_t layer_id)
Stop the graphics surface read process.
graphics_error_t Video_Start ( video_input_channel_t video_input_channel)
Start the video surface write process.
graphics_error_t Video_Stop ( video_input_channel_t video_input_channel)
Stop the video surface write process.
graphics_error_t Graphics_Read_Setting ( graphics_layer_t layer_id, void *framebuff, unsigned int fb_stride, graphics_format_t gr_format, wr_rd_swa_t wr_rd_swa, rect_t *gr_rect)
Graphics surface read process setting.
graphics_error_t Graphics_Read_Change ( graphics_layer_t layer_id, void *framebuff)
Graphics surface read buffer change process.
graphics_error_t Video_Write_Setting ( video_input_channel_t video_input_channel, graphics_video_col_sys_t col_sys, void *framebuff, unsigned int fb_stride, video_format_t video_format, wr_rd_swa_t wr_rd_swa, unsigned short video_write_buff_vw, unsigned short video_write_buff_hw)
Video surface write process setting.
graphics_error_t Video_Write_Change ( video_input_channel_t video_input_channel, void *framebuff, uint32_t fb_stride)
Video surface write buffer change process.

Interface

See the Pinout page for more details

inc/lcd_analog_rgb_ch1.h@4:aeefe5171463, 2016-06-30 (annotated)

Committer:
dkato
Date:
Thu Jun 30 11:00:37 2016 +0000
Revision:
4:aeefe5171463
Parent:
0:853f5b7408a7 
Add ARGB4444 to graphics layer read format.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
dkato 0:853f5b7408a7 1 /*******************************************************************************
dkato 0:853f5b7408a7 2 * DISCLAIMER
dkato 0:853f5b7408a7 3 * This software is supplied by Renesas Electronics Corporation and is only
dkato 0:853f5b7408a7 4 * intended for use with Renesas products. No other uses are authorized. This
dkato 0:853f5b7408a7 5 * software is owned by Renesas Electronics Corporation and is protected under
dkato 0:853f5b7408a7 6 * all applicable laws, including copyright laws.
dkato 0:853f5b7408a7 7 * THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
dkato 0:853f5b7408a7 8 * THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
dkato 0:853f5b7408a7 9 * LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
dkato 0:853f5b7408a7 10 * AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
dkato 0:853f5b7408a7 11 * TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
dkato 0:853f5b7408a7 12 * ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
dkato 0:853f5b7408a7 13 * FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
dkato 0:853f5b7408a7 14 * ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
dkato 0:853f5b7408a7 15 * BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
dkato 0:853f5b7408a7 16 * Renesas reserves the right, without notice, to make changes to this software
dkato 0:853f5b7408a7 17 * and to discontinue the availability of this software. By using this software,
dkato 0:853f5b7408a7 18 * you agree to the additional terms and conditions found by accessing the
dkato 0:853f5b7408a7 19 * following link:
dkato 0:853f5b7408a7 20 * http://www.renesas.com/disclaimer
dkato 0:853f5b7408a7 21 * Copyright (C) 2012 - 2015 Renesas Electronics Corporation. All rights reserved.
dkato 0:853f5b7408a7 22 *******************************************************************************/
dkato 0:853f5b7408a7 23 /**************************************************************************//**
dkato 0:853f5b7408a7 24 * @file lcd_analog_rgb_ch1.h
dkato 0:853f5b7408a7 25 * @version 1.00
dkato 0:853f5b7408a7 26 * $Rev: 199 $
dkato 0:853f5b7408a7 27 * $Date:: 2014-05-23 16:33:52 +0900#$
dkato 0:853f5b7408a7 28 * @brief LCD panel for vdc5 channel 1 definition header
dkato 0:853f5b7408a7 29 ******************************************************************************/
dkato 0:853f5b7408a7 30
dkato 0:853f5b7408a7 31 #ifndef LCD_ANALOG_RGB_CH1_H
dkato 0:853f5b7408a7 32 #define LCD_ANALOG_RGB_CH1_H
dkato 0:853f5b7408a7 33
dkato 0:853f5b7408a7 34 #ifndef LCD_PANEL_H
dkato 0:853f5b7408a7 35 #error Do not include this file directly!
dkato 0:853f5b7408a7 36 #else
dkato 0:853f5b7408a7 37 /******************************************************************************
dkato 0:853f5b7408a7 38 Includes <System Includes> , "Project Includes"
dkato 0:853f5b7408a7 39 ******************************************************************************/
dkato 0:853f5b7408a7 40 #include <stdlib.h>
dkato 0:853f5b7408a7 41
dkato 0:853f5b7408a7 42 #include "r_typedefs.h"
dkato 0:853f5b7408a7 43
dkato 0:853f5b7408a7 44 #include "r_vdc5.h"
dkato 0:853f5b7408a7 45
dkato 0:853f5b7408a7 46 #include "lcd_analog_rgb.h"
dkato 0:853f5b7408a7 47
dkato 0:853f5b7408a7 48
dkato 0:853f5b7408a7 49 /******************************************************************************
dkato 0:853f5b7408a7 50 Macro definitions
dkato 0:853f5b7408a7 51 ******************************************************************************/
dkato 0:853f5b7408a7 52 /* Option board (part number: RTK7721000B00000BR)
dkato 0:853f5b7408a7 53 ADV7123 (Video DAC), U10
dkato 0:853f5b7408a7 54 Analog RGB D-sub15 (RGB888), J16 */
dkato 0:853f5b7408a7 55 #define LCD_CH1_S_HSYNC (0u) /* Hsync start position */
dkato 0:853f5b7408a7 56 #define LCD_CH1_W_HSYNC (LCD_SVGA_H_SYNC_WIDTH) /* Hsync width */
dkato 0:853f5b7408a7 57 #define LCD_CH1_POL_HSYNC (LCD_SVGA_H_POLARITY) /* Polarity of Hsync pulse */
dkato 0:853f5b7408a7 58 /* LCD display area size, horizontal start position */
dkato 0:853f5b7408a7 59 #define LCD_CH1_DISP_HS (LCD_SVGA_H_SYNC_WIDTH + LCD_SVGA_H_BACK_PORCH)
dkato 0:853f5b7408a7 60 #define LCD_CH1_DISP_HW (LCD_SVGA_H_VISIBLE_AREA) /* LCD display area size, horizontal width */
dkato 0:853f5b7408a7 61
dkato 0:853f5b7408a7 62 /* Vsync start position */
dkato 0:853f5b7408a7 63 #define LCD_CH1_S_VSYNC (LCD_SVGA_V_BACK_PORCH + LCD_SVGA_V_VISIBLE_AREA + LCD_SVGA_V_FRONT_PORCH)
dkato 0:853f5b7408a7 64 #define LCD_CH1_W_VSYNC (LCD_SVGA_V_SYNC_WIDTH) /* Vsync width */
dkato 0:853f5b7408a7 65 #define LCD_CH1_POL_VSYNC (LCD_SVGA_V_POLARITY) /* Polarity of Vsync pulse */
dkato 0:853f5b7408a7 66 #define LCD_CH1_DISP_VS (LCD_SVGA_V_BACK_PORCH) /* LCD display area size, vertical start position */
dkato 0:853f5b7408a7 67 #define LCD_CH1_DISP_VW (LCD_SVGA_V_VISIBLE_AREA) /* LCD display area size, height (vertical width) */
dkato 0:853f5b7408a7 68
dkato 0:853f5b7408a7 69 #define LCD_CH1_SIG_FV (LCD_SVGA_V_TOTAL - 1u) /* Free-running Vsync period */
dkato 0:853f5b7408a7 70 #define LCD_CH1_SIG_FH (LCD_SVGA_H_TOTAL - 1u) /* Hsync period */
dkato 0:853f5b7408a7 71 /* Pixel data is latched in the rising edge of pixel clock on ADV7123.
dkato 0:853f5b7408a7 72 Therefore, pixel data should be output from VDC5 at the falling edge of the clock. */
dkato 0:853f5b7408a7 73 #define LCD_CH1_OUT_EDGE VDC5_EDGE_FALLING /* Output phase control of LCD_DATA[23:0] signal */
dkato 0:853f5b7408a7 74 #define LCD_CH1_OUT_FORMAT VDC5_LCD_OUTFORMAT_RGB888 /* LCD output format select */
dkato 0:853f5b7408a7 75
dkato 0:853f5b7408a7 76 #define LCD_CH1_PANEL_CLK VDC5_PANEL_ICKSEL_LVDS /* Panel clock select */
dkato 0:853f5b7408a7 77 #define LCD_CH1_PANEL_CLK_DIV VDC5_PANEL_CLKDIV_1_1 /* Panel clock frequency division ratio */
dkato 0:853f5b7408a7 78
dkato 0:853f5b7408a7 79 #define LCD_CH1_TCON_HALF (LCD_CH1_SIG_FH / 2u) /* TCON reference timing, 1/2fH timing */
dkato 0:853f5b7408a7 80 #define LCD_CH1_TCON_OFFSET (0u) /* TCON reference timing, offset Hsync signal timing */
dkato 0:853f5b7408a7 81
dkato 0:853f5b7408a7 82
dkato 0:853f5b7408a7 83 /******************************************************************************
dkato 0:853f5b7408a7 84 Typedef definitions
dkato 0:853f5b7408a7 85 ******************************************************************************/
dkato 0:853f5b7408a7 86
dkato 0:853f5b7408a7 87 /******************************************************************************
dkato 0:853f5b7408a7 88 Exported global functions (to be accessed by other files)
dkato 0:853f5b7408a7 89 ******************************************************************************/
dkato 0:853f5b7408a7 90 void GRAPHICS_SetLcdPanel_Ch1(void);
dkato 0:853f5b7408a7 91 void GRAPHICS_SetLcdTconSettings_Ch1(const vdc5_lcd_tcon_timing_t * * const outctrl);
dkato 0:853f5b7408a7 92
dkato 0:853f5b7408a7 93
dkato 0:853f5b7408a7 94 #endif /* LCD_PANEL_H not defined */
dkato 0:853f5b7408a7 95 #endif /* LCD_ANALOG_RGB_CH1_H */