This is a mbed Client sample where ZXing is incorporated, and works on GR-PEACH and GR-LYCHEE.
Dependencies: DisplayApp AsciiFont
Overview
This sample program shows how to use mbed Client together with ZXing which is an open-source, multi-format 1D/2D barcode image processing library. For more info on ZXing, please refer to https://github.com/zxing/zxing.
Required hardware
- GR-PEACH ( https://developer.mbed.org/platforms/Renesas-GR-PEACH/ )
- Audio Camera Shield ( https://developer.mbed.org/teams/Renesas/wiki/Audio_Camera-shield )
- LCD Shield ( https://developer.mbed.org/teams/Renesas/wiki/LCD-shield )
- Ethernet cable and connection to the internet
- Wireless Camera shieled (This is GR-PEACH' Wifi(ESP32) optional.)
- GR-LYCHEE ( https://developer.mbed.org/platforms/Renesas-GR-LYCHEE/ )
Application setup
- Select the connection type. For details, please refer to the following wiki:
https://os.mbed.com/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Connection-type. - Set the client credentials. For details, please refer to the following wiki:
https://os.mbed.com/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Client-credentials. - Change Ethernet settings. For details, please refer to the following wiki:
https://developer.mbed.org/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Ethernet-settings. - Change Wifi settings. For details, please refer to the following wiki:
https://os.mbed.com/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Wifi-settings. - Set up an IP address. (This step is optional.) For details, please refer to the following wiki:
https://os.mbed.com/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/IP-address-setup.
Building the example
To build this example:
- Import this example onto mbed Compiler.
- Configure the example in accordance with Application setup.
- Compile the example on mbed Compiler and download the resultant binary file.
- Plug the Ethernet cable into GR-PEACH or GR-LYCHEE if you are using Ethernet mode.
- Plug the micro-USB cable into the OpenSDA port which lies on the next to the RESET button.
- Copy the binary previously downloaded to your PC to GR-PEACH or GR-LYCHEE to flash this example. When the copy is successfully completed, the board is ready to work.
- Press the RESET button on the board to run the example.
- For verification, please refer to the following wiki:
https://developer.mbed.org/teams/Renesas/code/GR-PEACH_mbed-os-client-ZXingSample/wiki/Monitoring-the-application.
Application resources
This example exposes four resources listed below:
- 3202/0/5700. Decode result of barcode data input from camera (GET).
- 3201/0/5850. Blink function, blinks LED when executed (POST).
- 3201/0/5853. Blink pattern, used by the blink function to determine how to blink. In the format of 1000:500:1000:500:1000:500 (PUT).
- 3201/0/5855. Blink color, used by the blink function. Any of red, green, blue, cyan, yellow and magenta is acceptable if you are using GR-PEACH board (PUT).
- 3201/0/5855. Blink color, used by the blink function. Any of green, yellow, orange and red is acceptable if you are using GR-LYCHEE board (PUT).
For more info on how to get notifications when resource 1 changes, or how to use resource 2, 3 and 4, please look at
Import programGR-PEACH_mbed-connector-ZXingSample-node
Node.js based Web Application for mbed Device Connector specific to GR-PEACH_mbed-os-client-ZXingSample
mbedtls_mbed_client_config.h@5:6b6540e303f2, 2017-04-17 (annotated)
- Committer:
- 1050186
- Date:
- Mon Apr 17 05:28:29 2017 +0000
- Revision:
- 5:6b6540e303f2
- Parent:
- 2:6ec5c1c1d41c
- Child:
- 6:ea24d9271ff1
Support GCC_ARM, and update libraries.
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
dkato | 2:6ec5c1c1d41c | 1 | /** |
<> | 0:eb73febb2bba | 2 | * Minimal configuration for using mbedtls as part of mbed-client |
<> | 0:eb73febb2bba | 3 | * |
dkato | 2:6ec5c1c1d41c | 4 | * NOTE! This is an optimized, minimal configuration for mbed Client. |
dkato | 2:6ec5c1c1d41c | 5 | * We know it works with mbed Client but if you want to add more |
dkato | 2:6ec5c1c1d41c | 6 | * services/communications to the application yourself - please ensure |
dkato | 2:6ec5c1c1d41c | 7 | * you update this configuration accordingly. The default configuration |
dkato | 2:6ec5c1c1d41c | 8 | * can be found from mbedTLS Github: |
dkato | 2:6ec5c1c1d41c | 9 | * |
dkato | 2:6ec5c1c1d41c | 10 | * https://github.com/ARMmbed/mbedtls/blob/development/include/mbedtls/config.h |
dkato | 2:6ec5c1c1d41c | 11 | * |
dkato | 2:6ec5c1c1d41c | 12 | * |
<> | 0:eb73febb2bba | 13 | * Copyright (C) 2006-2016, ARM Limited, All Rights Reserved |
<> | 0:eb73febb2bba | 14 | * SPDX-License-Identifier: Apache-2.0 |
<> | 0:eb73febb2bba | 15 | * |
<> | 0:eb73febb2bba | 16 | * Licensed under the Apache License, Version 2.0 (the "License"); you may |
<> | 0:eb73febb2bba | 17 | * not use this file except in compliance with the License. |
<> | 0:eb73febb2bba | 18 | * You may obtain a copy of the License at |
<> | 0:eb73febb2bba | 19 | * |
<> | 0:eb73febb2bba | 20 | * http://www.apache.org/licenses/LICENSE-2.0 |
<> | 0:eb73febb2bba | 21 | * |
<> | 0:eb73febb2bba | 22 | * Unless required by applicable law or agreed to in writing, software |
<> | 0:eb73febb2bba | 23 | * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
<> | 0:eb73febb2bba | 24 | * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
<> | 0:eb73febb2bba | 25 | * See the License for the specific language governing permissions and |
<> | 0:eb73febb2bba | 26 | * limitations under the License. |
<> | 0:eb73febb2bba | 27 | * |
<> | 0:eb73febb2bba | 28 | * This file is part of mbed TLS (https://tls.mbed.org) |
<> | 0:eb73febb2bba | 29 | */ |
<> | 0:eb73febb2bba | 30 | |
<> | 0:eb73febb2bba | 31 | |
<> | 0:eb73febb2bba | 32 | #ifndef MBEDTLS_CUSTOM_CONFIG_H |
<> | 0:eb73febb2bba | 33 | #define MBEDTLS_CUSTOM_CONFIG_H |
<> | 0:eb73febb2bba | 34 | |
<> | 0:eb73febb2bba | 35 | /* System support */ |
<> | 0:eb73febb2bba | 36 | #define MBEDTLS_HAVE_ASM |
<> | 0:eb73febb2bba | 37 | |
<> | 0:eb73febb2bba | 38 | /* mbed TLS feature support */ |
<> | 0:eb73febb2bba | 39 | #define MBEDTLS_ECP_DP_SECP256R1_ENABLED |
<> | 0:eb73febb2bba | 40 | #define MBEDTLS_ECP_NIST_OPTIM |
<> | 0:eb73febb2bba | 41 | #define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH |
<> | 0:eb73febb2bba | 42 | #define MBEDTLS_SSL_PROTO_TLS1_2 |
<> | 0:eb73febb2bba | 43 | #define MBEDTLS_SSL_PROTO_DTLS |
<> | 0:eb73febb2bba | 44 | #define MBEDTLS_SSL_DTLS_ANTI_REPLAY |
<> | 0:eb73febb2bba | 45 | #define MBEDTLS_SSL_DTLS_HELLO_VERIFY |
<> | 0:eb73febb2bba | 46 | #define MBEDTLS_SSL_EXPORT_KEYS |
<> | 0:eb73febb2bba | 47 | |
<> | 0:eb73febb2bba | 48 | /* mbed TLS modules */ |
<> | 0:eb73febb2bba | 49 | #define MBEDTLS_AES_C |
<> | 0:eb73febb2bba | 50 | #define MBEDTLS_ASN1_PARSE_C |
<> | 0:eb73febb2bba | 51 | #define MBEDTLS_ASN1_WRITE_C |
<> | 0:eb73febb2bba | 52 | #define MBEDTLS_BIGNUM_C |
<> | 0:eb73febb2bba | 53 | #define MBEDTLS_CIPHER_C |
<> | 0:eb73febb2bba | 54 | #define MBEDTLS_CTR_DRBG_C |
<> | 0:eb73febb2bba | 55 | #define MBEDTLS_ECP_C |
<> | 0:eb73febb2bba | 56 | #define MBEDTLS_ENTROPY_C |
<> | 0:eb73febb2bba | 57 | #define MBEDTLS_MD_C |
<> | 0:eb73febb2bba | 58 | #define MBEDTLS_OID_C |
<> | 0:eb73febb2bba | 59 | #define MBEDTLS_PK_C |
<> | 0:eb73febb2bba | 60 | #define MBEDTLS_PK_PARSE_C |
<> | 0:eb73febb2bba | 61 | #define MBEDTLS_SHA256_C |
<> | 0:eb73febb2bba | 62 | #define MBEDTLS_SSL_COOKIE_C |
<> | 0:eb73febb2bba | 63 | #define MBEDTLS_SSL_CLI_C |
<> | 0:eb73febb2bba | 64 | #define MBEDTLS_SSL_SRV_C |
<> | 0:eb73febb2bba | 65 | #define MBEDTLS_SSL_TLS_C |
<> | 0:eb73febb2bba | 66 | |
<> | 0:eb73febb2bba | 67 | // XXX mbedclient needs these: mbedtls_x509_crt_free, mbedtls_x509_crt_init, mbedtls_x509_crt_parse |
<> | 0:eb73febb2bba | 68 | #define MBEDTLS_X509_USE_C |
<> | 0:eb73febb2bba | 69 | #define MBEDTLS_X509_CRT_PARSE_C |
<> | 0:eb73febb2bba | 70 | |
<> | 0:eb73febb2bba | 71 | // XXX: clean these up!! |
<> | 0:eb73febb2bba | 72 | #define MBEDTLS_SHA512_C |
<> | 0:eb73febb2bba | 73 | #define MBEDTLS_ECDH_C |
<> | 0:eb73febb2bba | 74 | #define MBEDTLS_GCM_C |
<> | 0:eb73febb2bba | 75 | |
<> | 0:eb73febb2bba | 76 | #define MBEDTLS_ECDH_C |
<> | 0:eb73febb2bba | 77 | #define MBEDTLS_ECDSA_C |
<> | 0:eb73febb2bba | 78 | #define MBEDTLS_X509_CRT_PARSE_C |
<> | 0:eb73febb2bba | 79 | |
<> | 0:eb73febb2bba | 80 | // Remove RSA, save 20KB at total |
<> | 0:eb73febb2bba | 81 | #undef MBEDTLS_RSA_C |
<> | 0:eb73febb2bba | 82 | #undef MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED |
<> | 0:eb73febb2bba | 83 | |
<> | 0:eb73febb2bba | 84 | // Remove error messages, save 10KB of ROM |
<> | 0:eb73febb2bba | 85 | #undef MBEDTLS_ERROR_C |
<> | 0:eb73febb2bba | 86 | |
<> | 0:eb73febb2bba | 87 | // Remove selftesting and save 11KB of ROM |
<> | 0:eb73febb2bba | 88 | #undef MBEDTLS_SELF_TEST |
<> | 0:eb73febb2bba | 89 | |
<> | 0:eb73febb2bba | 90 | // Reduces ROM size by 30 kB |
<> | 0:eb73febb2bba | 91 | #undef MBEDTLS_ERROR_STRERROR_DUMMY |
<> | 0:eb73febb2bba | 92 | #undef MBEDTLS_VERSION_FEATURES |
<> | 0:eb73febb2bba | 93 | #undef MBEDTLS_DEBUG_C |
<> | 0:eb73febb2bba | 94 | |
<> | 0:eb73febb2bba | 95 | // needed for parsing the certificates |
<> | 0:eb73febb2bba | 96 | #define MBEDTLS_PEM_PARSE_C |
<> | 0:eb73febb2bba | 97 | // dep of the previous |
<> | 0:eb73febb2bba | 98 | #define MBEDTLS_BASE64_C |
<> | 0:eb73febb2bba | 99 | |
dkato | 2:6ec5c1c1d41c | 100 | // Reduce IO buffer to save RAM, default is 16KB |
<> | 0:eb73febb2bba | 101 | #define MBEDTLS_SSL_MAX_CONTENT_LEN 2048 |
<> | 0:eb73febb2bba | 102 | |
<> | 0:eb73febb2bba | 103 | // define to save 8KB RAM at the expense of ROM |
<> | 0:eb73febb2bba | 104 | #undef MBEDTLS_AES_ROM_TABLES |
<> | 0:eb73febb2bba | 105 | |
<> | 0:eb73febb2bba | 106 | // Save ROM and a few bytes of RAM by specifying our own ciphersuite list |
<> | 0:eb73febb2bba | 107 | #define MBEDTLS_SSL_CIPHERSUITES MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 |
<> | 0:eb73febb2bba | 108 | |
<> | 0:eb73febb2bba | 109 | #include "mbedtls/check_config.h" |
<> | 0:eb73febb2bba | 110 | |
<> | 0:eb73febb2bba | 111 | #endif /* MBEDTLS_CUSTOM_CONFIG_H */ |