Diff: dashboard.cpp

Revision:

0:4788e1df7b55

Child:

12:2ac4b0df4007

diff -r 000000000000 -r 4788e1df7b55 dashboard.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/dashboard.cpp	Fri Mar 13 11:48:04 2020 +0000
@@ -0,0 +1,152 @@
+#include <mbed.h>
+#include "definitions.h"
+#include "dashboard.h"
+
+Dashboard::Dashboard(InterruptIn& hallSensor) : _hallSensor(hallSensor) {    // CONSTRUCTOR
+    
+    _hallSensor.rise(this, &Dashboard::tachoInterrupt);           // Register everytime hall sensor is detected
+    tachoTimer.start();                         // Timer for counting time between hall sensor triggers
+    
+    numberOfMagnets = 1;    // How many magnets on the wheels
+    
+    currentSpeed = 0.00f;
+    passedTime_ms = 0.00f;
+    passedTime = 0.00f;
+    lastTime = 0.00f;
+    wheelCircumference = 0.73513268f; // in meters. Radius = 0.117m
+    
+    currentDistance = 0.00f;
+    tachoCounter = 0;
+    currentTime = 0;
+}
+
+void Dashboard::tachoInterrupt() {
+    
+    currentTime = tachoTimer.read_ms();
+    passedTime = (currentTime - lastTime) / 1000;
+    pc.printf("Passed Time: %.2f\r\n", passedTime);
+    
+//    if (passedTime > 0.03) {
+    
+//        tachoCounter++;     // Increment tacho counter = number of strips detected
+        //pc.printf("count = %d\r\n", tachoCounter);
+        
+    //    getCurrentSpeed();
+    //    //   PASSED TIME IN ms
+    //    passedTime_ms = tachoTimer.read_ms() - lastTime;// - 21;  // 20ms propogation delay
+    //    
+    //    if (passedTime_ms > 100) { // IGNORE SHORT PULSES
+    //        lastTime = tachoTimer.read_ms();
+            currentDistance += (wheelCircumference / numberOfMagnets);
+            pc.printf("Current Distance = %.2f\r\n", currentDistance);
+            
+    //        passedTime = passedTime_ms / 1000.00f;
+    ////        pc.printf("Passed TimeMS Int: %d\r\n", passedTime_ms);
+    ////        pc.printf("Passed Time Int: %.2f\r\n", passedTime);
+    ////        pc.printf("Tacho Interrupt\r\n");
+    //    }
+        
+//        pc.printf("count = %d\r\n", tachoCounter);
+        
+        wheelFreq = 1 / (passedTime * numberOfMagnets);
+//        pc.printf("wheelFreq = %.2f\r\n", wheelFreq);
+        
+//        tachoCounter = 0;   // RESET
+        lastTime = currentTime;
+        
+        
+        if (passedTime > 0.00f) {    // Stops dividing by 0
+    
+            // 1 Hz FREQ = 1 RPS -> x60 for minutes
+            float rpm = wheelFreq * 60.00f;       /// MAX RPM AT 15KPH = 340RPM
+//            pc.printf("RPM = %.2f\r\n",rpm);
+            
+    //        if (rpm < 15.0f) {
+            
+                float kph = (wheelCircumference * rpm * (60.00f / 1000.00f));
+                printf("Speed = %.2f\r\n", kph);
+        
+//                if (kph > 17.0f) {
+//                    currentSpeed = 0;
+//                }
+//                else {
+                currentSpeed = int(kph);
+//                }
+    //        }
+            
+            
+//        }
+//        else {
+//            currentSpeed = 0;
+//             
+//        }
+    }
+
+}
+
+void Dashboard::getCurrentSpeed() {
+    
+    // USE THESE
+//    tachoCounter
+//    currentTime
+//    lastTime
+
+    currentTime = tachoTimer.read_ms();
+    if ((currentTime - lastTime) > 5000) {
+        currentSpeed = 0;
+    }
+//    passedTime = (currentTime - lastTime) / 1000;
+//    pc.printf("Passed Time: %.2f\r\n", passedTime);
+    
+    //pc.printf("count = %d\r\n", tachoCounter);
+//    
+//    wheelFreq = tachoCounter / (passedTime * numberOfMagnets);
+//    pc.printf("wheelFreq = %.2f\r\n", wheelFreq);
+//    
+//    tachoCounter = 0;   // RESET
+//    lastTime = currentTime;
+//    
+//    
+//    if (passedTime > 0.00f) {    // Stops dividing by 0
+        // PASSED TIME IN SECONDS = 1000 / TIME IN ms
+        // FREQ = 1/T = 1 * 1000 / T
+        
+//        pc.printf("Passed Time Calc: %.2f\r\n", passedTime);
+        
+//        if ((tachoTimer.read_ms() / 1000.00f) - lastTime < 10.00f) {
+//             wheelFreq = 1 / (numberOfMagnets * passedTime);
+////             pc.printf("wheelFreq set\r\n");
+//        }
+//        else {
+//            wheelFreq = 0.00f;  // Set frequency to zero if not sensed for more than 10s
+//            passedTime = 0.00f;
+////            pc.printf("wheelFreq Zeroed\r\n"); 
+//        }
+       
+                
+//        pc.printf("wheelFreq = %.4f\r\n", wheelFreq);
+        
+        // 1 Hz FREQ = 1 RPS -> x60 for minutes
+//        float rpm = wheelFreq * 60.00f;       /// MAX RPM AT 15KPH = 340RPM
+//        pc.printf("RPM = %.2f\r\n",rpm);
+//        
+//        // rpm x 60 = rph
+//        // speed = distance / time
+//        // kph = rph / (1km x circumference [m])
+//        
+//        // kph = 2πr × RPM × (60/1000)
+//        float kph = wheelCircumference * rpm * (60.00f / 1000.00f);
+////        float kph = (rpm * 60.00f) / (1000.00f * wheelCircumference);
+////        pc.printf("KM/H = %.2f\r\n",kph);
+//        if (kph > 15) {
+//            currentSpeed = 0;
+//        }
+//        else {
+//            currentSpeed = int(kph);
+//        }
+//    }
+//    else {
+//        currentSpeed = 0;
+//         
+//    }
+}
\ No newline at end of file