You are viewing an older revision! See the latest version
Variable Motor Speed with Force Sensor
Overview¶
This project demonstrates the use of Flexible Force Sensor to control speed of a motor linearly with force applied. As force applied increases, the speed of motor increases. In addition to this, an RGB LED is used to depict the speed range of motor. Also, the speed scaled to 0.0-1.0 is displayed on LCD.
Code¶
include the mbed library with this snippet
#include "mbed.h"
Wiring¶
| Mbed | FlexiForce Sensor | RGB LED | Motor Switch | uLCD |
|---|---|---|---|---|
| VOUT (3.3V) | Terminal 1 | |||
| VU (5V) | 5V | |||
| GND | GND | GND | ||
| p20 (Analog In) | Terminal 3 | |||
| p24 (PWM Out) | Red | |||
| p23 (PWM Out) | Green | |||
| p22 (PWM Out) | Blue | |||
| p21 (PWM Out) | Base of 2N3904 | |||
| TX (p28) | RX | |||
| RX (p27) | TX | |||
| RX (p30) | Reset |