Code Example for ROHM Mutli-Sensor Shield on the Nordic Semiconductor nRF51-DK¶

This code was written to be used with the Nordic Semiconductor nRF51-DK.

This is the basic example code for interfacing ROHM's Multi-sensor Shield Board onto this board.

Additional information about the ROHM MultiSensor Shield Board can be found at the following link: https://github.com/ROHMUSDC/ROHM_SensorPlatform_Multi-Sensor-Shield

For code example for the ROHM SENSORSHLD1-EVK-101, please see the following link: https://developer.mbed.org/teams/ROHMUSDC/code/Nordic_UART_TEMPLATE_ROHM_SHLD1Update/

Operation¶

Ultimately, this code will initialize all the sensors on the Multi-sensor shield board and then poll the sensors. The sensor data will then be returned to the BTLE COM port link and will be view-able on any BTLE enabled phone that can connect to the Nordic UART Application.

Supported ROHM Sensor Devices¶

• BDE0600G Temperature Sensor
• BM1383GLV Pressure Sensor
• BU52014 Hall Sensor
• ML8511 UV Sensor
• RPR-0521 ALS/PROX Sensor
• BH1745NUC Color Sensor
• KMX62 Accel/Mag Sensor
• KX122 Accel Sensor
• KXG03 Gyro/Accel Sensor

Sensor Applicable Code Sections¶

• Added a Section in "Main" to act as initialization
• Added to the "Periodic Callback" to read sensor data and return to Phone/Host

Questions/Feedback¶

Please feel free to let us know any questions/feedback/comments/concerns on the shield implementation by contacting the following e-mail:

• engineering@rohmsemiconductor.com