mbed library sources. Supersedes mbed-src.
Fork of mbed by
Diff: targets/hal/TARGET_WIZNET/TARGET_W7500x/TARGET_WIZwiki_W7500P/PinNames.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
--- a/targets/hal/TARGET_WIZNET/TARGET_W7500x/TARGET_WIZwiki_W7500P/PinNames.h Tue Aug 02 14:07:36 2016 +0000 +++ b/targets/hal/TARGET_WIZNET/TARGET_W7500x/TARGET_WIZwiki_W7500P/PinNames.h Fri Sep 02 15:07:44 2016 +0100 @@ -1,230 +1,230 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2015 WIZnet Co.,Ltd. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of ARM Limited nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PINNAMES_H -#define MBED_PINNAMES_H - -#include "cmsis.h" - -#ifdef __cplusplus -extern "C" { -#endif - - -// See W7500x_hal_gpio.h for values of MODE, PUPD and AFNUM -#define WIZ_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE) << 8) | ((PUPD) << 4) | ((AFNUM) << 0))) -#define WIZ_PIN_PUPD(X) (((X) >> 4) & 0x0F) -#define WIZ_PIN_AFNUM(X) (((X) >> 0) & 0x0F) -#define WIZ_PIN_MODE(X) (((X) >> 8) & 0x0F) -#define WIZ_MODE_INPUT (0) -#define WIZ_MODE_OUTPUT (1) -#define WIZ_MODE_AF (2) - -#define WIZ_GPIO_NOPULL (0) /*!< No Pull-up or Pull-down activation */ -#define WIZ_GPIO_PULLDOWN (1) /*!< Pull-down activation */ -#define WIZ_GPIO_PULLUP (2) /*!< Pull-up activation */ -#define WIZ_GPIO_OPEN_DRAIN (3) /*!< Open Drain activation */ - - -#define WIZ_PORT(X) (((uint32_t)(X) >> 4) & 0xF) // port number (0=A, 1=B, 2=C, 3=D) -#define WIZ_PIN_NUM(X) ((uint32_t)(X) & 0xF) // pin number -#define WIZ_PIN_INDEX(X) (1 << ((uint32_t)(X) & 0xF)) // pin index : flag bit - - -typedef enum { - PIN_INPUT, - PIN_OUTPUT -} PinDirection; - - -typedef enum { - // W7500x PORT[5:4] + PIN[3:0]) - PA_0 = 0x000, - PA_1 = 0x001, - PA_2 = 0x002, - PA_3 = 0x003, - PA_4 = 0x004, - PA_5 = 0x005, - PA_6 = 0x006, - PA_7 = 0x007, - PA_8 = 0x008, - PA_9 = 0x009, - PA_10 = 0x00A, - PA_11 = 0x00B, - PA_12 = 0x00C, - PA_13 = 0x00D, - PA_14 = 0x00E, - PA_15 = 0x00F, - - PB_0 = 0x010, - PB_1 = 0x011, - PB_2 = 0x012, - PB_3 = 0x013, - PB_4 = 0x014, - PB_5 = 0x015, - PB_6 = 0x016, - PB_7 = 0x017, - PB_8 = 0x018, - PB_9 = 0x019, - PB_10 = 0x01A, - PB_11 = 0x01B, - PB_12 = 0x01C, - PB_13 = 0x01D, - PB_14 = 0x01E, - PB_15 = 0x01F, - - PC_0 = 0x020, - PC_1 = 0x021, - PC_2 = 0x022, - PC_3 = 0x023, - PC_4 = 0x024, - PC_5 = 0x025, - PC_6 = 0x026, - PC_7 = 0x027, - PC_8 = 0x028, - PC_9 = 0x029, - - PC_10 = 0x02A, - PC_11 = 0x02B, - PC_12 = 0x02C, - PC_13 = 0x02D, - PC_14 = 0x02E, - PC_15 = 0x02F, - - PD_0 = 0x030, - PD_1 = 0x031, - PD_2 = 0x032, - PD_3 = 0x033, - PD_4 = 0x034, - - PA_00 = PA_0, - PA_01 = PA_1, - PA_02 = PA_2, - PA_03 = PA_3, - PA_04 = PA_4, - PA_05 = PA_5, - PA_06 = PA_6, - PA_07 = PA_7, - PA_08 = PA_8, - PA_09 = PA_9, - - PB_00 = PB_0, - PB_01 = PB_1, - PB_02 = PB_2, - PB_03 = PB_3, - PB_04 = PB_4, - PB_05 = PB_5, - PB_06 = PB_6, - PB_07 = PB_7, - PB_08 = PB_8, - PB_09 = PB_9, - - PC_00 = PC_0, - PC_01 = PC_1, - PC_02 = PC_2, - PC_03 = PC_3, - PC_04 = PC_4, - PC_05 = PC_5, - PC_06 = PC_6, - PC_07 = PC_7, - PC_08 = PC_8, - PC_09 = PC_9, - - PD_00 = PD_0, - PD_01 = PD_1, - PD_02 = PD_2, - PD_03 = PD_3, - PD_04 = PD_4, - - // Arduino connector namings - A0 = PC_15, // AIN0 - A1 = PC_14, // AIN1 - A2 = PC_13, // AIN2 - A3 = PC_12, // AIN3 - A4 = PC_9, // AIN4 - A5 = PC_8, // AIN5 - - D0 = PA_14, - D1 = PA_13, - D2 = PC_3, - D3 = PC_2, - D4 = PA_2, - D5 = PA_1, - D6 = PA_0, - D7 = PA_12, - D8 = PA_11, - D9 = PC_1, - D10 = PA_5, - D11 = PA_8, - D12 = PA_7, - D13 = PA_6, - D14 = PA_10, - D15 = PA_9, - - // Generic signals namings - LED_RED = PC_0, - LED_GREEN = PC_4, - LED_BLUE = PC_5, - - LED1 = LED_RED, - LED2 = LED_GREEN, - LED3 = LED_BLUE, - LED4 = LED_BLUE, - - LEDR = LED_RED, - LEDG = LED_GREEN, - LEDB = LED_BLUE, - - USBTX = PC_10, - USBRX = PC_11, - - //Use SPI1 - SD_SEL = PB_0, // SPI1_CS - SD_CLK = PB_1, // SPI1_CLK - SD_MISO = PB_2, // MOSI1 - SD_MOSI = PB_3, // MISO1 - - // Not connected - NC = (int)0xFFFFFFFF -} PinName; - -typedef enum { - PullNone = 0, - PullDown = 1, - PullUp = 2, - PullDefault = PullNone -} PinMode; - - -#ifdef __cplusplus -} -#endif - -#endif +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2015 WIZnet Co.,Ltd. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of ARM Limited nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + + +// See W7500x_hal_gpio.h for values of MODE, PUPD and AFNUM +#define WIZ_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE) << 8) | ((PUPD) << 4) | ((AFNUM) << 0))) +#define WIZ_PIN_PUPD(X) (((X) >> 4) & 0x0F) +#define WIZ_PIN_AFNUM(X) (((X) >> 0) & 0x0F) +#define WIZ_PIN_MODE(X) (((X) >> 8) & 0x0F) +#define WIZ_MODE_INPUT (0) +#define WIZ_MODE_OUTPUT (1) +#define WIZ_MODE_AF (2) + +#define WIZ_GPIO_NOPULL (0) /*!< No Pull-up or Pull-down activation */ +#define WIZ_GPIO_PULLDOWN (1) /*!< Pull-down activation */ +#define WIZ_GPIO_PULLUP (2) /*!< Pull-up activation */ +#define WIZ_GPIO_OPEN_DRAIN (3) /*!< Open Drain activation */ + + +#define WIZ_PORT(X) (((uint32_t)(X) >> 4) & 0xF) // port number (0=A, 1=B, 2=C, 3=D) +#define WIZ_PIN_NUM(X) ((uint32_t)(X) & 0xF) // pin number +#define WIZ_PIN_INDEX(X) (1 << ((uint32_t)(X) & 0xF)) // pin index : flag bit + + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + + +typedef enum { + // W7500x PORT[5:4] + PIN[3:0]) + PA_0 = 0x000, + PA_1 = 0x001, + PA_2 = 0x002, + PA_3 = 0x003, + PA_4 = 0x004, + PA_5 = 0x005, + PA_6 = 0x006, + PA_7 = 0x007, + PA_8 = 0x008, + PA_9 = 0x009, + PA_10 = 0x00A, + PA_11 = 0x00B, + PA_12 = 0x00C, + PA_13 = 0x00D, + PA_14 = 0x00E, + PA_15 = 0x00F, + + PB_0 = 0x010, + PB_1 = 0x011, + PB_2 = 0x012, + PB_3 = 0x013, + PB_4 = 0x014, + PB_5 = 0x015, + PB_6 = 0x016, + PB_7 = 0x017, + PB_8 = 0x018, + PB_9 = 0x019, + PB_10 = 0x01A, + PB_11 = 0x01B, + PB_12 = 0x01C, + PB_13 = 0x01D, + PB_14 = 0x01E, + PB_15 = 0x01F, + + PC_0 = 0x020, + PC_1 = 0x021, + PC_2 = 0x022, + PC_3 = 0x023, + PC_4 = 0x024, + PC_5 = 0x025, + PC_6 = 0x026, + PC_7 = 0x027, + PC_8 = 0x028, + PC_9 = 0x029, + + PC_10 = 0x02A, + PC_11 = 0x02B, + PC_12 = 0x02C, + PC_13 = 0x02D, + PC_14 = 0x02E, + PC_15 = 0x02F, + + PD_0 = 0x030, + PD_1 = 0x031, + PD_2 = 0x032, + PD_3 = 0x033, + PD_4 = 0x034, + + PA_00 = PA_0, + PA_01 = PA_1, + PA_02 = PA_2, + PA_03 = PA_3, + PA_04 = PA_4, + PA_05 = PA_5, + PA_06 = PA_6, + PA_07 = PA_7, + PA_08 = PA_8, + PA_09 = PA_9, + + PB_00 = PB_0, + PB_01 = PB_1, + PB_02 = PB_2, + PB_03 = PB_3, + PB_04 = PB_4, + PB_05 = PB_5, + PB_06 = PB_6, + PB_07 = PB_7, + PB_08 = PB_8, + PB_09 = PB_9, + + PC_00 = PC_0, + PC_01 = PC_1, + PC_02 = PC_2, + PC_03 = PC_3, + PC_04 = PC_4, + PC_05 = PC_5, + PC_06 = PC_6, + PC_07 = PC_7, + PC_08 = PC_8, + PC_09 = PC_9, + + PD_00 = PD_0, + PD_01 = PD_1, + PD_02 = PD_2, + PD_03 = PD_3, + PD_04 = PD_4, + + // Arduino connector namings + A0 = PC_15, // AIN0 + A1 = PC_14, // AIN1 + A2 = PC_13, // AIN2 + A3 = PC_12, // AIN3 + A4 = PC_9, // AIN4 + A5 = PC_8, // AIN5 + + D0 = PA_14, + D1 = PA_13, + D2 = PC_3, + D3 = PC_2, + D4 = PA_2, + D5 = PA_1, + D6 = PA_0, + D7 = PA_12, + D8 = PA_11, + D9 = PC_1, + D10 = PA_5, + D11 = PA_8, + D12 = PA_7, + D13 = PA_6, + D14 = PA_10, + D15 = PA_9, + + // Generic signals namings + LED_RED = PC_0, + LED_GREEN = PC_4, + LED_BLUE = PC_5, + + LED1 = LED_RED, + LED2 = LED_GREEN, + LED3 = LED_BLUE, + LED4 = LED_BLUE, + + LEDR = LED_RED, + LEDG = LED_GREEN, + LEDB = LED_BLUE, + + USBTX = PC_10, + USBRX = PC_11, + + //Use SPI1 + SD_SEL = PB_0, // SPI1_CS + SD_CLK = PB_1, // SPI1_CLK + SD_MISO = PB_2, // MOSI1 + SD_MOSI = PB_3, // MISO1 + + // Not connected + NC = (int)0xFFFFFFFF +} PinName; + +typedef enum { + PullNone = 0, + PullDown = 1, + PullUp = 2, + PullDefault = PullNone +} PinMode; + + +#ifdef __cplusplus +} +#endif + +#endif