mbed library sources. Supersedes mbed-src.
Fork of mbed by
Diff: targets/hal/TARGET_NXP/TARGET_LPC81X/gpio_api.c
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
--- a/targets/hal/TARGET_NXP/TARGET_LPC81X/gpio_api.c Tue Aug 02 14:07:36 2016 +0000 +++ b/targets/hal/TARGET_NXP/TARGET_LPC81X/gpio_api.c Fri Sep 02 15:07:44 2016 +0100 @@ -1,70 +1,70 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#include "mbed_assert.h" -#include "gpio_api.h" -#include "pinmap.h" - -static int gpio_enabled = 0; -static void gpio_enable(void) { - gpio_enabled = 1; - - /* Enable AHB clock to the GPIO domain. */ - LPC_SYSCON->SYSAHBCLKCTRL |= (1<<6); - - /* Peripheral reset control to GPIO and GPIO INT, a "1" bring it out of reset. */ - LPC_SYSCON->PRESETCTRL &= ~(0x1<<10); - LPC_SYSCON->PRESETCTRL |= (0x1<<10); -} - -uint32_t gpio_set(PinName pin) { - int f = 0; - - if (!gpio_enabled) - gpio_enable(); - - pin_function(pin, f); - - return (1 << ((int)pin & 0x1F)); -} - -void gpio_init(gpio_t *obj, PinName pin) { - obj->pin = pin; - if (pin == (PinName)NC) - return; - - obj->mask = gpio_set(pin); - - obj->reg_set = &LPC_GPIO_PORT->SET0; - obj->reg_clr = &LPC_GPIO_PORT->CLR0; - obj->reg_in = &LPC_GPIO_PORT->PIN0; - obj->reg_dir = &LPC_GPIO_PORT->DIR0; -} - -void gpio_mode(gpio_t *obj, PinMode mode) { - pin_mode(obj->pin, mode); -} - -void gpio_dir(gpio_t *obj, PinDirection direction) { - MBED_ASSERT(obj->pin != (PinName)NC); - switch (direction) { - case PIN_INPUT : - *obj->reg_dir &= ~obj->mask; - break; - case PIN_OUTPUT: - *obj->reg_dir |= obj->mask; - break; - } -} +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include "mbed_assert.h" +#include "gpio_api.h" +#include "pinmap.h" + +static int gpio_enabled = 0; +static void gpio_enable(void) { + gpio_enabled = 1; + + /* Enable AHB clock to the GPIO domain. */ + LPC_SYSCON->SYSAHBCLKCTRL |= (1<<6); + + /* Peripheral reset control to GPIO and GPIO INT, a "1" bring it out of reset. */ + LPC_SYSCON->PRESETCTRL &= ~(0x1<<10); + LPC_SYSCON->PRESETCTRL |= (0x1<<10); +} + +uint32_t gpio_set(PinName pin) { + int f = 0; + + if (!gpio_enabled) + gpio_enable(); + + pin_function(pin, f); + + return (1 << ((int)pin & 0x1F)); +} + +void gpio_init(gpio_t *obj, PinName pin) { + obj->pin = pin; + if (pin == (PinName)NC) + return; + + obj->mask = gpio_set(pin); + + obj->reg_set = &LPC_GPIO_PORT->SET0; + obj->reg_clr = &LPC_GPIO_PORT->CLR0; + obj->reg_in = &LPC_GPIO_PORT->PIN0; + obj->reg_dir = &LPC_GPIO_PORT->DIR0; +} + +void gpio_mode(gpio_t *obj, PinMode mode) { + pin_mode(obj->pin, mode); +} + +void gpio_dir(gpio_t *obj, PinDirection direction) { + MBED_ASSERT(obj->pin != (PinName)NC); + switch (direction) { + case PIN_INPUT : + *obj->reg_dir &= ~obj->mask; + break; + case PIN_OUTPUT: + *obj->reg_dir |= obj->mask; + break; + } +}