teralytic
mbed library sources. Supersedes mbed-src.
Diff: targets/cmsis/TARGET_NXP/TARGET_LPC81X/TARGET_LPC810/TOOLCHAIN_IAR/startup_LPC8xx.S
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
--- a/targets/cmsis/TARGET_NXP/TARGET_LPC81X/TARGET_LPC810/TOOLCHAIN_IAR/startup_LPC8xx.S Tue Aug 02 14:07:36 2016 +0000 +++ b/targets/cmsis/TARGET_NXP/TARGET_LPC81X/TARGET_LPC810/TOOLCHAIN_IAR/startup_LPC8xx.S Fri Sep 02 15:07:44 2016 +0100 @@ -1,197 +1,197 @@ -/************************************************** - * - * Part one of the system initialization code, contains low-level - * initialization, plain thumb variant. - * - * Copyright 2011 IAR Systems. All rights reserved. - * - * $Revision: 47876 $ - * - **************************************************/ - -; -; The modules in this file are included in the libraries, and may be replaced -; by any user-defined modules that define the PUBLIC symbol _program_start or -; a user defined start symbol. -; To override the cstartup defined in the library, simply add your modified -; version to the workbench project. -; -; The vector table is normally located at address 0. -; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. -; The name "__vector_table" has special meaning for C-SPY: -; it is where the SP start value is found, and the NVIC vector -; table register (VTOR) is initialized to this address if != 0. -; -; Cortex-M version -; - - - MODULE ?cstartup - - ;; Forward declaration of sections. - SECTION CSTACK:DATA:NOROOT(3) - - SECTION .intvec:CODE:NOROOT(2) - - EXTERN __iar_program_start - EXTERN SystemInit - PUBLIC __vector_table - PUBLIC __vector_table_0x1c - PUBLIC __Vectors - PUBLIC __Vectors_End - PUBLIC __Vectors_Size - - DATA - -__vector_table - DCD sfe(CSTACK) - DCD Reset_Handler - DCD NMI_Handler - DCD HardFault_Handler - DCD 0 - DCD 0 - DCD 0 -__vector_table_0x1c - DCD 0 - DCD 0 - DCD 0 - DCD 0 - DCD SVC_Handler - DCD 0 - DCD 0 - DCD PendSV_Handler - DCD SysTick_Handler - - ; External Interrupts - DCD SPI0_IRQHandler ; SPI0 controller - DCD SPI1_IRQHandler ; SPI1 controller - DCD 0 ; Reserved - DCD UART0_IRQHandler ; UART0 - DCD UART1_IRQHandler ; UART1 - DCD UART2_IRQHandler ; UART2 - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD I2C_IRQHandler ; I2C controller - DCD SCT_IRQHandler ; Smart Counter Timer - DCD MRT_IRQHandler ; Multi-Rate Timer - DCD CMP_IRQHandler ; Comparator - DCD WDT_IRQHandler ; PIO1 (0:11) - DCD BOD_IRQHandler ; Brown Out Detect - DCD 0 ; Reserved - DCD WKT_IRQHandler ; Wakeup timer - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD PININT0_IRQHandler ; PIO INT0 - DCD PININT1_IRQHandler ; PIO INT1 - DCD PININT2_IRQHandler ; PIO INT2 - DCD PININT3_IRQHandler ; PIO INT3 - DCD PININT4_IRQHandler ; PIO INT4 - DCD PININT5_IRQHandler ; PIO INT5 - DCD PININT6_IRQHandler ; PIO INT6 - DCD PININT7_IRQHandler ; PIO INT7 -__Vectors_End - -__Vectors EQU __vector_table -__Vectors_Size EQU __Vectors_End - __Vectors - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;; Default interrupt handlers. -;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - - THUMB - PUBWEAK Reset_Handler - SECTION .text:CODE:NOROOT:REORDER(2) -Reset_Handler - LDR R0, =SystemInit - BLX R0 - LDR R0, =__iar_program_start - BX R0 - - PUBWEAK NMI_Handler - PUBWEAK HardFault_Handler - PUBWEAK SVC_Handler - PUBWEAK PendSV_Handler - PUBWEAK SysTick_Handler - PUBWEAK SPI0_IRQHandler - PUBWEAK SPI1_IRQHandler - PUBWEAK UART0_IRQHandler - PUBWEAK UART1_IRQHandler - PUBWEAK UART2_IRQHandler - PUBWEAK I2C_IRQHandler - PUBWEAK SCT_IRQHandler - PUBWEAK MRT_IRQHandler - PUBWEAK CMP_IRQHandler - PUBWEAK WDT_IRQHandler - PUBWEAK BOD_IRQHandler - PUBWEAK WKT_IRQHandler - PUBWEAK PININT0_IRQHandler - PUBWEAK PININT1_IRQHandler - PUBWEAK PININT2_IRQHandler - PUBWEAK PININT3_IRQHandler - PUBWEAK PININT4_IRQHandler - PUBWEAK PININT5_IRQHandler - PUBWEAK PININT6_IRQHandler - PUBWEAK PININT7_IRQHandler - - SECTION .text:CODE:REORDER:NOROOT(1) - THUMB -NMI_Handler -HardFault_Handler -SVC_Handler -PendSV_Handler -SysTick_Handler -SPI0_IRQHandler -SPI1_IRQHandler -UART0_IRQHandler -UART1_IRQHandler -UART2_IRQHandler -I2C_IRQHandler -SCT_IRQHandler -MRT_IRQHandler -CMP_IRQHandler -WDT_IRQHandler -BOD_IRQHandler -WKT_IRQHandler -PININT0_IRQHandler -PININT1_IRQHandler -PININT2_IRQHandler -PININT3_IRQHandler -PININT4_IRQHandler -PININT5_IRQHandler -PININT6_IRQHandler -PININT7_IRQHandler -Default_IRQHandler - B Default_IRQHandler - - SECTION .crp:CODE:ROOT(2) - DATA -/* Code Read Protection -NO_ISP 0x4E697370 - Prevents sampling of pin PIO0_1 for entering ISP mode -CRP1 0x12345678 - Write to RAM command cannot access RAM below 0x10000300. - - Copy RAM to flash command can not write to Sector 0. - - Erase command can erase Sector 0 only when all sectors - are selected for erase. - - Compare command is disabled. - - Read Memory command is disabled. -CRP2 0x87654321 - Read Memory is disabled. - - Write to RAM is disabled. - - "Go" command is disabled. - - Copy RAM to flash is disabled. - - Compare is disabled. -CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry - by pulling PIO0_1 LOW is disabled if a valid user code is - present in flash sector 0. -Caution: If CRP3 is selected, no future factory testing can be -performed on the device. -*/ - DCD 0xFFFFFFFF - - END +/************************************************** + * + * Part one of the system initialization code, contains low-level + * initialization, plain thumb variant. + * + * Copyright 2011 IAR Systems. All rights reserved. + * + * $Revision: 47876 $ + * + **************************************************/ + +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + PUBLIC __vector_table_0x1c + PUBLIC __Vectors + PUBLIC __Vectors_End + PUBLIC __Vectors_Size + + DATA + +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler + DCD NMI_Handler + DCD HardFault_Handler + DCD 0 + DCD 0 + DCD 0 +__vector_table_0x1c + DCD 0 + DCD 0 + DCD 0 + DCD 0 + DCD SVC_Handler + DCD 0 + DCD 0 + DCD PendSV_Handler + DCD SysTick_Handler + + ; External Interrupts + DCD SPI0_IRQHandler ; SPI0 controller + DCD SPI1_IRQHandler ; SPI1 controller + DCD 0 ; Reserved + DCD UART0_IRQHandler ; UART0 + DCD UART1_IRQHandler ; UART1 + DCD UART2_IRQHandler ; UART2 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD I2C_IRQHandler ; I2C controller + DCD SCT_IRQHandler ; Smart Counter Timer + DCD MRT_IRQHandler ; Multi-Rate Timer + DCD CMP_IRQHandler ; Comparator + DCD WDT_IRQHandler ; PIO1 (0:11) + DCD BOD_IRQHandler ; Brown Out Detect + DCD 0 ; Reserved + DCD WKT_IRQHandler ; Wakeup timer + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD PININT0_IRQHandler ; PIO INT0 + DCD PININT1_IRQHandler ; PIO INT1 + DCD PININT2_IRQHandler ; PIO INT2 + DCD PININT3_IRQHandler ; PIO INT3 + DCD PININT4_IRQHandler ; PIO INT4 + DCD PININT5_IRQHandler ; PIO INT5 + DCD PININT6_IRQHandler ; PIO INT6 + DCD PININT7_IRQHandler ; PIO INT7 +__Vectors_End + +__Vectors EQU __vector_table +__Vectors_Size EQU __Vectors_End - __Vectors + +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; + + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + PUBWEAK HardFault_Handler + PUBWEAK SVC_Handler + PUBWEAK PendSV_Handler + PUBWEAK SysTick_Handler + PUBWEAK SPI0_IRQHandler + PUBWEAK SPI1_IRQHandler + PUBWEAK UART0_IRQHandler + PUBWEAK UART1_IRQHandler + PUBWEAK UART2_IRQHandler + PUBWEAK I2C_IRQHandler + PUBWEAK SCT_IRQHandler + PUBWEAK MRT_IRQHandler + PUBWEAK CMP_IRQHandler + PUBWEAK WDT_IRQHandler + PUBWEAK BOD_IRQHandler + PUBWEAK WKT_IRQHandler + PUBWEAK PININT0_IRQHandler + PUBWEAK PININT1_IRQHandler + PUBWEAK PININT2_IRQHandler + PUBWEAK PININT3_IRQHandler + PUBWEAK PININT4_IRQHandler + PUBWEAK PININT5_IRQHandler + PUBWEAK PININT6_IRQHandler + PUBWEAK PININT7_IRQHandler + + SECTION .text:CODE:REORDER:NOROOT(1) + THUMB +NMI_Handler +HardFault_Handler +SVC_Handler +PendSV_Handler +SysTick_Handler +SPI0_IRQHandler +SPI1_IRQHandler +UART0_IRQHandler +UART1_IRQHandler +UART2_IRQHandler +I2C_IRQHandler +SCT_IRQHandler +MRT_IRQHandler +CMP_IRQHandler +WDT_IRQHandler +BOD_IRQHandler +WKT_IRQHandler +PININT0_IRQHandler +PININT1_IRQHandler +PININT2_IRQHandler +PININT3_IRQHandler +PININT4_IRQHandler +PININT5_IRQHandler +PININT6_IRQHandler +PININT7_IRQHandler +Default_IRQHandler + B Default_IRQHandler + + SECTION .crp:CODE:ROOT(2) + DATA +/* Code Read Protection +NO_ISP 0x4E697370 - Prevents sampling of pin PIO0_1 for entering ISP mode +CRP1 0x12345678 - Write to RAM command cannot access RAM below 0x10000300. + - Copy RAM to flash command can not write to Sector 0. + - Erase command can erase Sector 0 only when all sectors + are selected for erase. + - Compare command is disabled. + - Read Memory command is disabled. +CRP2 0x87654321 - Read Memory is disabled. + - Write to RAM is disabled. + - "Go" command is disabled. + - Copy RAM to flash is disabled. + - Compare is disabled. +CRP3 0x43218765 - Access to chip via the SWD pins is disabled. ISP entry + by pulling PIO0_1 LOW is disabled if a valid user code is + present in flash sector 0. +Caution: If CRP3 is selected, no future factory testing can be +performed on the device. +*/ + DCD 0xFFFFFFFF + + END