C++ Library for the PsiSwarm Robot - Version 0.7
Fork of PsiSwarmV7 by
display.h
- Committer:
- jah128
- Date:
- 2016-02-04
- Revision:
- 0:d6269d17c8cf
- Child:
- 2:c6986ee3c7c5
File content as of revision 0:d6269d17c8cf:
/* University of York Robotics Laboratory PsiSwarm Library: Display Driver Header File * * File: display.h * * (C) Dept. Electronics & Computer Science, University of York * James Hilder, Alan Millard, Alexander Horsfield, Homero Elizondo, Jon Timmis * * PsiSwarm Library Version: 0.4 * * February 2016 * * * Driver for the Midas 16x2 I2C LCD Display (MCCOG21605x6W) LCD * * Farnell part 2218942 or 2063206 * */ #ifndef DISPLAY_H #define DISPLAY_H #define PAGE_TIME 0.4 #define CLEAR_TIME 0.8 class Display : public Stream { // Public Functions public: /** Create the LCD Display object connected to the default pins * * @param sda pin - default is p28 * @param scl pin - default is p27 * @param reset pin - default is p29 * @param backlight pin - default is p30 */ Display(); /** Create the LCD Display object connected to specific pins * */ Display(PinName sda, PinName scl, PinName reset, PinName backlight); //Print string message void write_string(char * message); //Print string message of given length void write_string(char * message, char length); //Set the row and column of cursor position void set_position(char row, char column); // Enable or disable cursor void set_cursor(char enable); // Enable or disable cursor blink void set_blink(char enable); // Enable or disable display void set_display(char enable); // Set the brightness of the backlight void set_backlight_brightness(float brightness); // Special function for when debug messages are sent to display void debug_page(char * message, char length); void IF_restore_page(void); void IF_debug_multipage(void); void IF_backlight_toggle(void); //Parts of initialisation routine void post_init(void); void post_post_init(void); // Clear display void clear_display(); //Set cursor to home position void home(); // Send a 1-byte control message to the display int i2c_message(char byte); // Default initialisation sequence for the display void init_display(char mode); int disp_putc(int c); private : I2C _i2c; DigitalOut _reset; DigitalOut _backlight; char display_on; char cursor_on; char blink_on; void _set_display(); virtual int _putc(int c); virtual int _getc(); }; #endif // DISPLAY_H