File content as of revision 0:d8f79bc0aebe:

#include "mbed.h"
//************************ Complete to Interface ***************************
// configure library with this code ****************************************
SPI dot_matrix(D11,NC,D13); //mosi miso sclk
DigitalOut lat(PA_12); //6
DigitalOut sb(PA_11); //7
DigitalOut rst(D10);
BusOut open_line(D2,D3,D4,D5,D6,D7,D8,D9);
              //c0 c1 c2 c3 c4 c5 c6 c7 dont foget d7
Serial pc(D1, D0);
Timer t;
int check_win = 0;
int main(){

  dot_matrix.frequency(1000000);
  // dot_matrix.format(6,0);
  uint8_t wb[3] = {255,255,255};
  uint8_t rgb2[3] = {3,3,60};
  uint8_t rgb[3] = {3,60,3};
  uint8_t pic[8] = {0x3c,0x42,0xa5,0x81,0xa5,0x99,0x42,0x3c};
  uint8_t pic2[8] = {0x3c,0x42,0xa5,0x81,0x99,0xa5,0x42,0x3c};

  uint8_t temp;
  int line[8] = {1,2,4,8,16,32,64,128};

  rst = 1;
  wait(0.5);
  rst = 0;
  wait(0.5);
  rst = 1;
  wait(0.5);

  //dot_matrix.format(6,0);
  sb = 0; // 6 bit
  for(int i = 0; i<8; i++){
    dot_matrix.write(wb[0]);
    dot_matrix.write(wb[1]);
    dot_matrix.write(wb[2]);
  }
  open_line = 0;
  // dot_matrix.format(8,0);
  sb = 1; // 8 bit
  t.start();
  while (1) {
    if(check_win == 1){
      for(int j = 0;j<8;j++){
        temp = pic[j];
        for(int i = 0; i<8; i++){
          if(temp & 0x80){
            dot_matrix.write(rgb[0]);
            dot_matrix.write(rgb[1]);
            dot_matrix.write(rgb[2]);
          }
          else{
            dot_matrix.write(0);
            dot_matrix.write(0);
            dot_matrix.write(0);
          }
          temp = temp << 1;
        }
        lat = 1;
        lat = 0;
        open_line = line[j];
        wait(0.001);
        open_line = 0;
      }
    }
    else if(check_win == 0){
      for(int j = 0;j<8;j++){
        temp = pic2[j];
        for(int i = 0; i<8; i++){
          if(temp & 0x80){
            dot_matrix.write(rgb2[0]);
            dot_matrix.write(rgb2[1]);
            dot_matrix.write(rgb2[2]);
          }
          else{
            dot_matrix.write(0);
            dot_matrix.write(0);
            dot_matrix.write(0);
          }
          temp = temp << 1;
        }
        lat = 1;
        lat = 0;
        open_line = line[j];
        wait(0.001);
        open_line = 0;
      }
    }
    else{
      t.reset();
    }
  }


}