File content as of revision 19:09d58952b65d:

/*!

 ******************************************************************************

 * @file:   config.c

 * @brief:

 *-----------------------------------------------------------------------------

 *

Copyright (c) 2019 Analog Devices, Inc.



All rights reserved.



Redistribution and use in source and binary forms, with or without modification,

are permitted provided that the following conditions are met:

  - Redistributions of source code must retain the above copyright notice,

    this list of conditions and the following disclaimer.

  - Redistributions in binary form must reproduce the above copyright notice,

    this list of conditions and the following disclaimer in the documentation

    and/or other materials provided with the distribution.

  - Modified versions of the software must be conspicuously marked as such.

  - This software is licensed solely and exclusively for use with processors

    manufactured by or for Analog Devices, Inc.

  - This software may not be combined or merged with other code in any manner

    that would cause the software to become subject to terms and conditions

    which differ from those listed here.

  - Neither the name of Analog Devices, Inc. nor the names of its

    contributors may be used to endorse or promote products derived

    from this software without specific prior written permission.

  - The use of this software may or may not infringe the patent rights of one

    or more patent holders.  This license does not release you from the

    requirement that you obtain separate licenses from these patent holders

    to use this software.



THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES, INC. AND CONTRIBUTORS "AS IS" AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,

TITLE, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN

NO EVENT SHALL ANALOG DEVICES, INC. OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,

INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, DAMAGES ARISING OUT OF CLAIMS OF INTELLECTUAL

PROPERTY RIGHTS INFRINGEMENT; PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS

OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 *

 *****************************************************************************/



#include "inc/admw_config_types.h"



ADMW_CONFIG config= {

    .versionId = { .major = 2, .minor = 0 },

    .productId = ADMW_PRODUCT_ID_ADMW1001,

    .admw1001 = {

            .power = {

                .powerMode = ADMW1001_POWER_MODE_ACTIVE,

            },

            .measurement = {

                .operatingMode = ADMW1001_OPERATING_MODE_CONTINUOUS,

                .dataReadyMode = ADMW1001_DATAREADY_PER_CYCLE, // FIX: Temporarily all values from json are hardcoded to this one in the Contracts.FileGenerator - > file translations!!

                .cycleInterval = 0,

                .vBiasEnable = true,

            },

            .diagnostics = {

                .disableGlobalDiag = true,

                .disableMeasurementDiag = true,

                .osdFrequency = ADMW1001_OPEN_SENSOR_DIAGNOSTICS_DISABLED,

            },

            .channels = {

                [ADMW1001_CH_ID_ANLG_1_UNIVERSAL] = {

                    .enableChannel = true,

                    .disablePublishing = false,

                    .compensationChannel = ADMW1001_CH_ID_NONE,

                    .lutSelect = ADMW1001_LUT_DEFAULT,

                    .measurementUnit = ADMW1001_MEASUREMENT_UNIT_CELSIUS,

                    .lowThreshold = -50,

                    .highThreshold = 250,

                    .offsetAdjustment = 0.0,

                    .gainAdjustment = 0.0,

                    .sensorParameter = 0.0,

                    .measurementsPerCycle = 1,

                    .cycleSkipCount = 0,

                    .extraSettlingTime = 0,

                    .priority = 0,

                    .adcChannelConfig = {

                        .sensor = ADMW1001_ADC_SENSOR_RTD_2WIRE_PT100,

                        .rtdCurve = ADMW1001_ADC_RTD_CURVE_EUROPEAN,

                        .gain = ADMW1001_ADC_GAIN_2X,

                        .current = {

                            .excitationState= ADMW1001_ADC_EXC_STATE_ALWAYS_ON,

                            .outputLevel = ADMW1001_ADC_EXC_CURRENT_250uA,

                            .diodeRatio = 0,

                        },

                        .filter = {

                            .type = ADMW1001_ADC_FILTER_SINC3,

                            .sf = ADMW1001_SF_8P24HZ,

                            .chopMode = ADMW1001_CHOP_MD_SW,

                            .notch1p2 = false,

                            .groundSwitch = ADMW1001_ADC_GND_SW_OPEN

                        },

                        .reference = ADMW1001_ADC_REFERENCE_VOLTAGE_INTERNAL,

                    },

                },

                [ADMW1001_CH_ID_ANLG_1_DIFFERENTIAL] = {

                    .enableChannel = true,

                    .disablePublishing = false,

                    .compensationChannel = ADMW1001_CH_ID_ANLG_1_UNIVERSAL,

                    .lutSelect = ADMW1001_LUT_DEFAULT,

                    .measurementUnit = ADMW1001_MEASUREMENT_UNIT_CELSIUS,

                    .lowThreshold = -50,

                    .highThreshold = 250,

                    .offsetAdjustment = 0.0,

                    .gainAdjustment = 0.0,

                    .sensorParameter = 0.0,

                    .measurementsPerCycle = 1,

                    .cycleSkipCount = 0,

                    .extraSettlingTime = 4499.99986449257,

                    .priority = 0,

                    .adcChannelConfig = {

                        .sensor = ADMW1001_ADC_SENSOR_THERMOCOUPLE_K,

                        .rtdCurve = ADMW1001_ADC_RTD_CURVE_EUROPEAN,

                        .gain = 8,

                        .current = {

                            .excitationState= ADMW1001_ADC_EXC_STATE_CYCLE_POWER,

                            .outputLevel = ADMW1001_ADC_EXC_CURRENT_EXTERNAL,

                            .diodeRatio = 0,

                        },

                        .filter = {

                            .type = ADMW1001_ADC_FILTER_SINC3,

                            .sf = ADMW1001_SF_8P24HZ,

                            .chopMode = ADMW1001_CHOP_MD_SW,

                            .notch1p2 = false,

                            .groundSwitch = ADMW1001_ADC_GND_SW_OPEN

                        },

                        .reference = ADMW1001_ADC_REFERENCE_VOLTAGE_INTERNAL,

                    },

                },

            },

    },

};