Setup da Placa LCD Gian - Leite

Dependents:   Main

Fork of TextLCD by Wim Huiskamp

Committer:
wim
Date:
Sat Jun 28 14:27:32 2014 +0000
Revision:
30:033048611c01
Parent:
29:a3663151aa65
Child:
31:ef31cd8a00d1
Tested AIP31068 for I2C, tested SPI3_9 and SPI3_10

Who changed what in which revision?

UserRevisionLine numberNew contents of line
simon 1:ac48b187213c 1 /* mbed TextLCD Library, for a 4-bit LCD based on HD44780
simon 6:e4cb7ddee0d3 2 * Copyright (c) 2007-2010, sford, http://mbed.org
wim 13:24506ba22480 3 * 2013, v01: WH, Added LCD types, fixed LCD address issues, added Cursor and UDCs
wim 15:b70ebfffb258 4 * 2013, v02: WH, Added I2C and SPI bus interfaces
wim 15:b70ebfffb258 5 * 2013, v03: WH, Added support for LCD40x4 which uses 2 controllers
wim 17:652ab113bc2e 6 * 2013, v04: WH, Added support for Display On/Off, improved 4bit bootprocess
wim 18:bd65dc10f27f 7 * 2013, v05: WH, Added support for 8x2B, added some UDCs
wim 19:c747b9e2e7b8 8 * 2013, v06: WH, Added support for devices that use internal DC/DC converters
wim 20:e0da005a777f 9 * 2013, v07: WH, Added support for backlight and include portdefinitions for LCD2004 Module from DFROBOT
wim 21:9eb628d9e164 10 * 2014, v08: WH, Refactored in Base and Derived Classes to deal with mbed lib change regarding 'NC' defined DigitalOut pins
wim 25:6162b31128c9 11 * 2014, v09: WH/EO, Added Class for Native SPI controllers such as ST7032
wim 26:bd897a001012 12 * 2014, v10: WH, Added Class for Native I2C controllers such as ST7032i, Added support for MCP23008 I2C portexpander, Added support for Adafruit module
wim 30:033048611c01 13 * 2014, v11: WH, Added support for native I2C controllers such as PCF21XX, Improved the _initCtrl() method to deal with differences between all supported controllers
simon 1:ac48b187213c 14 *
simon 1:ac48b187213c 15 * Permission is hereby granted, free of charge, to any person obtaining a copy
simon 1:ac48b187213c 16 * of this software and associated documentation files (the "Software"), to deal
simon 1:ac48b187213c 17 * in the Software without restriction, including without limitation the rights
simon 1:ac48b187213c 18 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
simon 1:ac48b187213c 19 * copies of the Software, and to permit persons to whom the Software is
simon 1:ac48b187213c 20 * furnished to do so, subject to the following conditions:
simon 2:227356c7d12c 21 *
simon 1:ac48b187213c 22 * The above copyright notice and this permission notice shall be included in
simon 1:ac48b187213c 23 * all copies or substantial portions of the Software.
simon 2:227356c7d12c 24 *
simon 1:ac48b187213c 25 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
simon 1:ac48b187213c 26 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
simon 1:ac48b187213c 27 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
simon 1:ac48b187213c 28 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
simon 1:ac48b187213c 29 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
simon 1:ac48b187213c 30 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
simon 1:ac48b187213c 31 * THE SOFTWARE.
simon 1:ac48b187213c 32 */
simon 1:ac48b187213c 33
simon 1:ac48b187213c 34 #ifndef MBED_TEXTLCD_H
simon 1:ac48b187213c 35 #define MBED_TEXTLCD_H
simon 1:ac48b187213c 36
simon 1:ac48b187213c 37 #include "mbed.h"
simon 2:227356c7d12c 38
simon 5:a53b3e2d6f1e 39 /** A TextLCD interface for driving 4-bit HD44780-based LCDs
simon 2:227356c7d12c 40 *
wim 30:033048611c01 41 * Currently supports 8x1, 8x2, 12x3, 12x4, 16x1, 16x2, 16x4, 20x2, 20x4, 24x1, 24x2, 24x4, 40x2 and 40x4 panels
wim 27:22d5086f6ba6 42 * Interface options include direct mbed pins, I2C portexpander (PCF8474/PCF8574A or MCP23008) or SPI bus shiftregister (74595).
wim 27:22d5086f6ba6 43 * Supports some controllers with native I2C or SP interface. Supports some controllers that provide internal DC/DC converters for VLCD or VLED.
simon 2:227356c7d12c 44 *
simon 2:227356c7d12c 45 * @code
simon 2:227356c7d12c 46 * #include "mbed.h"
simon 2:227356c7d12c 47 * #include "TextLCD.h"
simon 5:a53b3e2d6f1e 48 *
wim 16:c276b75e6585 49 * // I2C Communication
wim 16:c276b75e6585 50 * I2C i2c_lcd(p28,p27); // SDA, SCL
wim 16:c276b75e6585 51 *
wim 16:c276b75e6585 52 * // SPI Communication
wim 16:c276b75e6585 53 * SPI spi_lcd(p5, NC, p7); // MOSI, MISO, SCLK
wim 16:c276b75e6585 54 *
wim 22:35742ec80c24 55 * //TextLCD lcd(p15, p16, p17, p18, p19, p20); // RS, E, D4-D7, LCDType=LCD16x2, BL=NC, E2=NC, LCDTCtrl=HD44780
wim 28:30fa94f7341c 56 * //TextLCD_SPI lcd(&spi_lcd, p8, TextLCD::LCD40x4); // SPI bus, 74595 expander, CS pin, LCD Type
wim 22:35742ec80c24 57 * TextLCD_I2C lcd(&i2c_lcd, 0x42, TextLCD::LCD20x4); // I2C bus, PCF8574 Slaveaddress, LCD Type
wim 21:9eb628d9e164 58 * //TextLCD_I2C lcd(&i2c_lcd, 0x42, TextLCD::LCD16x2, TextLCD::WS0010); // I2C bus, PCF8574 Slaveaddress, LCD Type, Device Type
wim 27:22d5086f6ba6 59 * //TextLCD_SPI_N lcd(&spi_lcd, p8, p9); // SPI bus, CS pin, RS pin, LCDType=LCD16x2, BL=NC, LCDTCtrl=ST7032_3V3
wim 28:30fa94f7341c 60 * //TextLCD_I2C_N lcd(&i2c_lcd, ST7032_SA, TextLCD::LCD16x2, NC, TextLCD::ST7032_3V3); // I2C bus, Slaveaddress, LCD Type, BL=NC, LCDTCtrl=ST7032_3V3
simon 5:a53b3e2d6f1e 61 *
simon 2:227356c7d12c 62 * int main() {
wim 16:c276b75e6585 63 * lcd.printf("Hello World!\n");
simon 2:227356c7d12c 64 * }
simon 2:227356c7d12c 65 * @endcode
simon 2:227356c7d12c 66 */
wim 8:03116f75b66e 67
wim 26:bd897a001012 68
wim 26:bd897a001012 69 //Pin Defines for I2C PCF8574/PCF8574A or MCP23008 and SPI 74595 bus expander interfaces
wim 13:24506ba22480 70 //LCD and serial portexpanders should be wired accordingly
wim 20:e0da005a777f 71 //
wim 26:bd897a001012 72 //Select Hardware module (one option only)
wim 29:a3663151aa65 73 #define DEFAULT 0
wim 29:a3663151aa65 74 #define ADAFRUIT 1
wim 26:bd897a001012 75 #define DFROBOT 0
wim 26:bd897a001012 76
wim 26:bd897a001012 77 #if (DEFAULT==1)
wim 29:a3663151aa65 78 //Definitions for default (WH) mapping between serial port expander pins and LCD controller
wim 26:bd897a001012 79 //This hardware supports the I2C bus expander (PCF8574/PCF8574A or MCP23008) and SPI bus expander (74595) interfaces
wim 29:a3663151aa65 80 //See https://mbed.org/cookbook/Text-LCD-Enhanced
wim 26:bd897a001012 81 //
wim 13:24506ba22480 82 //Note: LCD RW pin must be connected to GND
wim 15:b70ebfffb258 83 // E2 is used for LCD40x4 (second controller)
wim 26:bd897a001012 84 // BL may be used to control backlight
wim 15:b70ebfffb258 85 #define D_LCD_PIN_D4 0
wim 15:b70ebfffb258 86 #define D_LCD_PIN_D5 1
wim 15:b70ebfffb258 87 #define D_LCD_PIN_D6 2
wim 15:b70ebfffb258 88 #define D_LCD_PIN_D7 3
wim 15:b70ebfffb258 89 #define D_LCD_PIN_RS 4
wim 15:b70ebfffb258 90 #define D_LCD_PIN_E 5
wim 15:b70ebfffb258 91 #define D_LCD_PIN_E2 6
wim 15:b70ebfffb258 92 #define D_LCD_PIN_BL 7
wim 13:24506ba22480 93
wim 20:e0da005a777f 94 #define D_LCD_PIN_RW D_LCD_PIN_E2
wim 20:e0da005a777f 95
wim 26:bd897a001012 96 //Select I2C Portexpander type (one option only)
wim 26:bd897a001012 97 #define PCF8574 1
wim 26:bd897a001012 98 #define MCP23008 0
wim 26:bd897a001012 99 #endif
wim 20:e0da005a777f 100
wim 26:bd897a001012 101 #if (ADAFRUIT==1)
wim 29:a3663151aa65 102 //Definitions for Adafruit i2cspilcdbackpack mapping between serial port expander pins and LCD controller
wim 26:bd897a001012 103 //This hardware supports both an I2C expander (MCP23008) and an SPI expander (74595) selectable by a jumper.
wim 29:a3663151aa65 104 //See http://www.ladyada.net/products/i2cspilcdbackpack
wim 26:bd897a001012 105 //
wim 26:bd897a001012 106 //Note: LCD RW pin must be kept LOW
wim 26:bd897a001012 107 // E2 is not available on this hardware and so it does not support LCD40x4 (second controller)
wim 26:bd897a001012 108 // BL is used to control backlight
wim 26:bd897a001012 109 #define D_LCD_PIN_0 0
wim 26:bd897a001012 110 #define D_LCD_PIN_RS 1
wim 26:bd897a001012 111 #define D_LCD_PIN_E 2
wim 26:bd897a001012 112 #define D_LCD_PIN_D4 3
wim 26:bd897a001012 113 #define D_LCD_PIN_D5 4
wim 26:bd897a001012 114 #define D_LCD_PIN_D6 5
wim 26:bd897a001012 115 #define D_LCD_PIN_D7 6
wim 26:bd897a001012 116 #define D_LCD_PIN_BL 7
wim 26:bd897a001012 117
wim 26:bd897a001012 118 #define D_LCD_PIN_E2 D_LCD_PIN_0
wim 26:bd897a001012 119
wim 26:bd897a001012 120 //Force I2C portexpander type
wim 26:bd897a001012 121 #define PCF8574 0
wim 26:bd897a001012 122 #define MCP23008 1
wim 26:bd897a001012 123 #endif
wim 26:bd897a001012 124
wim 26:bd897a001012 125 #if (DFROBOT==1)
wim 29:a3663151aa65 126 //Definitions for DFROBOT LCD2004 Module mapping between serial port expander pins and LCD controller
wim 26:bd897a001012 127 //This hardware uses PCF8574 and is different from earlier/different Arduino I2C LCD displays
wim 29:a3663151aa65 128 //See http://arduino-info.wikispaces.com/LCD-Blue-I2C
wim 26:bd897a001012 129 //
wim 20:e0da005a777f 130 //Note: LCD RW pin must be kept LOW
wim 26:bd897a001012 131 // E2 is not available on default Arduino hardware and so it does not support LCD40x4 (second controller)
wim 20:e0da005a777f 132 // BL is used to control backlight
wim 20:e0da005a777f 133 #define D_LCD_PIN_RS 0
wim 20:e0da005a777f 134 #define D_LCD_PIN_RW 1
wim 20:e0da005a777f 135 #define D_LCD_PIN_E 2
wim 20:e0da005a777f 136 #define D_LCD_PIN_BL 3
wim 20:e0da005a777f 137 #define D_LCD_PIN_D4 4
wim 20:e0da005a777f 138 #define D_LCD_PIN_D5 5
wim 20:e0da005a777f 139 #define D_LCD_PIN_D6 6
wim 20:e0da005a777f 140 #define D_LCD_PIN_D7 7
wim 20:e0da005a777f 141
wim 20:e0da005a777f 142 #define D_LCD_PIN_E2 D_LCD_PIN_RW
wim 26:bd897a001012 143
wim 26:bd897a001012 144 //Force I2C portexpander type
wim 26:bd897a001012 145 #define PCF8574 1
wim 26:bd897a001012 146 #define MCP23008 0
wim 20:e0da005a777f 147 #endif
wim 13:24506ba22480 148
wim 26:bd897a001012 149 //Bitpattern Defines for I2C PCF8574/PCF8574A, MCP23008 and SPI 74595 Bus expanders
wim 13:24506ba22480 150 //
wim 13:24506ba22480 151 #define D_LCD_D4 (1<<D_LCD_PIN_D4)
wim 13:24506ba22480 152 #define D_LCD_D5 (1<<D_LCD_PIN_D5)
wim 13:24506ba22480 153 #define D_LCD_D6 (1<<D_LCD_PIN_D6)
wim 13:24506ba22480 154 #define D_LCD_D7 (1<<D_LCD_PIN_D7)
wim 13:24506ba22480 155 #define D_LCD_RS (1<<D_LCD_PIN_RS)
wim 13:24506ba22480 156 #define D_LCD_E (1<<D_LCD_PIN_E)
wim 13:24506ba22480 157 #define D_LCD_E2 (1<<D_LCD_PIN_E2)
wim 13:24506ba22480 158 #define D_LCD_BL (1<<D_LCD_PIN_BL)
wim 20:e0da005a777f 159 //#define D_LCD_RW (1<<D_LCD_PIN_RW)
wim 20:e0da005a777f 160
wim 20:e0da005a777f 161 #define D_LCD_BUS_MSK (D_LCD_D4 | D_LCD_D5 | D_LCD_D6 | D_LCD_D7)
wim 20:e0da005a777f 162 #define D_LCD_BUS_DEF 0x00
wim 13:24506ba22480 163
wim 26:bd897a001012 164 /* PCF8574/PCF8574A I2C portexpander slave address */
wim 30:033048611c01 165 #define PCF8574_SA0 0x40
wim 30:033048611c01 166 #define PCF8574_SA1 0x42
wim 30:033048611c01 167 #define PCF8574_SA2 0x44
wim 30:033048611c01 168 #define PCF8574_SA3 0x46
wim 30:033048611c01 169 #define PCF8574_SA4 0x48
wim 30:033048611c01 170 #define PCF8574_SA5 0x4A
wim 30:033048611c01 171 #define PCF8574_SA6 0x4C
wim 30:033048611c01 172 #define PCF8574_SA7 0x4E
wim 26:bd897a001012 173
wim 30:033048611c01 174 #define PCF8574A_SA0 0x70
wim 30:033048611c01 175 #define PCF8574A_SA1 0x72
wim 30:033048611c01 176 #define PCF8574A_SA2 0x74
wim 30:033048611c01 177 #define PCF8574A_SA3 0x76
wim 30:033048611c01 178 #define PCF8574A_SA4 0x78
wim 30:033048611c01 179 #define PCF8574A_SA5 0x7A
wim 30:033048611c01 180 #define PCF8574A_SA6 0x7C
wim 30:033048611c01 181 #define PCF8574A_SA7 0x7E
wim 26:bd897a001012 182
wim 26:bd897a001012 183 /* MCP23008 I2C portexpander slave address */
wim 30:033048611c01 184 #define MCP23008_SA0 0x40
wim 30:033048611c01 185 #define MCP23008_SA1 0x42
wim 30:033048611c01 186 #define MCP23008_SA2 0x44
wim 30:033048611c01 187 #define MCP23008_SA3 0x46
wim 30:033048611c01 188 #define MCP23008_SA4 0x48
wim 30:033048611c01 189 #define MCP23008_SA5 0x4A
wim 30:033048611c01 190 #define MCP23008_SA6 0x4C
wim 30:033048611c01 191 #define MCP23008_SA7 0x4E
wim 26:bd897a001012 192
wim 26:bd897a001012 193 /* MCP23008 I2C portexpander internal registers */
wim 30:033048611c01 194 #define IODIR 0x00
wim 30:033048611c01 195 #define IPOL 0x01
wim 30:033048611c01 196 #define GPINTEN 0x02
wim 30:033048611c01 197 #define DEFVAL 0x03
wim 30:033048611c01 198 #define INTCON 0x04
wim 30:033048611c01 199 #define IOCON 0x05
wim 30:033048611c01 200 #define GPPU 0x06
wim 30:033048611c01 201 #define INTF 0x07
wim 30:033048611c01 202 #define INTCAP 0x08
wim 30:033048611c01 203 #define GPIO 0x09
wim 30:033048611c01 204 #define OLAT 0x0A
wim 26:bd897a001012 205
wim 26:bd897a001012 206
wim 26:bd897a001012 207 /* ST7032I I2C slave address */
wim 30:033048611c01 208 #define ST7032_SA 0x7C
wim 26:bd897a001012 209
wim 29:a3663151aa65 210 /* PCF21XX I2C slave address */
wim 30:033048611c01 211 #define PCF21XX_SA0 0x74
wim 30:033048611c01 212 #define PCF21XX_SA1 0x76
wim 30:033048611c01 213
wim 30:033048611c01 214 /* AIP31068 I2C slave address */
wim 30:033048611c01 215 #define AIP31068_SA 0x7C
wim 30:033048611c01 216
wim 30:033048611c01 217 /* LCD Type information on Rows, Columns and Variant. This information is encoded in
wim 30:033048611c01 218 * an int and used for the LCDType enumerators in order to simplify code maintenance */
wim 30:033048611c01 219 // Columns encoded in b7..b0
wim 30:033048611c01 220 #define LCD_T_COL_MSK 0x000000FF
wim 30:033048611c01 221 #define LCD_T_C8 0x00000008
wim 30:033048611c01 222 #define LCD_T_C10 0x0000000A
wim 30:033048611c01 223 #define LCD_T_C12 0x0000000C
wim 30:033048611c01 224 #define LCD_T_C16 0x00000010
wim 30:033048611c01 225 #define LCD_T_C20 0x00000014
wim 30:033048611c01 226 #define LCD_T_C24 0x00000018
wim 30:033048611c01 227 #define LCD_T_C32 0x00000020
wim 30:033048611c01 228 #define LCD_T_C40 0x00000028
wim 30:033048611c01 229
wim 30:033048611c01 230 // Rows encoded in b15..b8
wim 30:033048611c01 231 #define LCD_T_ROW_MSK 0x0000FF00
wim 30:033048611c01 232 #define LCD_T_R1 0x00000100
wim 30:033048611c01 233 #define LCD_T_R2 0x00000200
wim 30:033048611c01 234 #define LCD_T_R3 0x00000300
wim 30:033048611c01 235 #define LCD_T_R4 0x00000400
wim 30:033048611c01 236
wim 30:033048611c01 237 // Addressing mode encoded in b19..b16
wim 30:033048611c01 238 #define LCD_T_ADR_MSK 0x000F0000
wim 30:033048611c01 239 #define LCD_T_A 0x00000000 /*Mode A (Default), 1, 2 or 4 line display */
wim 30:033048611c01 240 #define LCD_T_B 0x00010000 /*Mode B, Alternate 8x2 (actually 16x1 display) */
wim 30:033048611c01 241 #define LCD_T_C 0x00020000 /*Mode C, Alternate 16x1 (actually 8x2 display) */
wim 30:033048611c01 242 #define LCD_T_D 0x00030000 /*Mode D, Alternate 3 or 4 line display (12x4, 24x4) */
wim 30:033048611c01 243 #define LCD_T_D1 0x00040000 /*Mode D1, Alternate 3 or 4 line display (12x4, 24x4) */
wim 30:033048611c01 244 #define LCD_T_E 0x00050000 /*Mode E, 4x40 display (actually two 40x2) */
wim 30:033048611c01 245
wim 30:033048611c01 246 /* LCD Ctrl information on interface support and features. This information is encoded in
wim 30:033048611c01 247 * an int and used for the LCDCtrl enumerators in order to simplify code maintenance */
wim 30:033048611c01 248 // Interface encoded in b31..b24
wim 30:033048611c01 249 #define LCD_C_BUS_MSK 0xFF000000
wim 30:033048611c01 250 #define LCD_C_PAR 0x01000000 /*Parallel 4 or 8 bit data, E pin */
wim 30:033048611c01 251 #define LCD_C_SPI3_9 0x02000000 /*SPI 3 line (MOSI, SCL, CS pins), 9 bits (RS + 8 Data) */
wim 30:033048611c01 252 #define LCD_C_SPI3_10 0x04000000 /*SPI 3 line (MOSI, SCL, CS pins), 10 bits (RS, RW + 8 Data) */
wim 30:033048611c01 253 #define LCD_C_SPI4 0x08000000 /*SPI 4 line (MOSI, SCL, CS, RS pin) */
wim 30:033048611c01 254 #define LCD_C_I2C 0x10000000 /*I2C (SDA, SCL pin) */
wim 30:033048611c01 255 // Features encoded in b23..b16
wim 30:033048611c01 256 #define LCD_C_FTR_MSK 0x00FF0000
wim 30:033048611c01 257 #define LCD_C_BST 0x00010000 /*Booster */
wim 30:033048611c01 258 #define LCD_C_CTR 0x00010000 /*Contrast Control */
wim 30:033048611c01 259 #define LCD_C_ICN 0x00020000 /*Icons */
wim 13:24506ba22480 260
wim 13:24506ba22480 261 /** Some sample User Defined Chars 5x7 dots */
wim 30:033048611c01 262 extern const char udc_ae[]; //æ
wim 30:033048611c01 263 extern const char udc_0e[]; //ø
wim 30:033048611c01 264 extern const char udc_ao[]; //å
wim 30:033048611c01 265 extern const char udc_AE[]; //Æ
wim 30:033048611c01 266 extern const char udc_0E[]; //Ø
wim 30:033048611c01 267 extern const char udc_Ao[]; //Å
wim 30:033048611c01 268 extern const char udc_PO[]; //Padlock Open
wim 30:033048611c01 269 extern const char udc_PC[]; //Padlock Closed
wim 11:9ec02df863a1 270
wim 30:033048611c01 271 extern const char udc_0[]; // |>
wim 30:033048611c01 272 extern const char udc_1[]; // <|
wim 30:033048611c01 273 extern const char udc_2[]; // |
wim 30:033048611c01 274 extern const char udc_3[]; // ||
wim 30:033048611c01 275 extern const char udc_4[]; // |||
wim 30:033048611c01 276 extern const char udc_5[]; // =
wim 30:033048611c01 277 extern const char udc_6[]; // checkerboard
wim 30:033048611c01 278 extern const char udc_7[]; // \
wim 11:9ec02df863a1 279
wim 30:033048611c01 280 extern const char udc_degr[]; // Degree symbol
wim 13:24506ba22480 281
wim 30:033048611c01 282 extern const char udc_TM_T[]; // Trademark T
wim 30:033048611c01 283 extern const char udc_TM_M[]; // Trademark M
wim 13:24506ba22480 284
wim 30:033048611c01 285 //extern const char udc_Bat_Hi[]; // Battery Full
wim 30:033048611c01 286 //extern const char udc_Bat_Ha[]; // Battery Half
wim 30:033048611c01 287 //extern const char udc_Bat_Lo[]; // Battery Low
wim 30:033048611c01 288 extern const char udc_Bat_Hi[]; // Battery Full
wim 30:033048611c01 289 extern const char udc_Bat_Ha[]; // Battery Half
wim 30:033048611c01 290 extern const char udc_Bat_Lo[]; // Battery Low
wim 30:033048611c01 291 extern const char udc_AC[]; // AC Power
wim 13:24506ba22480 292
wim 30:033048611c01 293 //extern const char udc_smiley[]; // Smiley
wim 30:033048611c01 294 //extern const char udc_droopy[]; // Droopey
wim 30:033048611c01 295 //extern const char udc_note[]; // Note
wim 18:bd65dc10f27f 296
wim 30:033048611c01 297 //extern const char udc_bar_1[]; // Bar 1
wim 30:033048611c01 298 //extern const char udc_bar_2[]; // Bar 11
wim 30:033048611c01 299 //extern const char udc_bar_3[]; // Bar 111
wim 30:033048611c01 300 //extern const char udc_bar_4[]; // Bar 1111
wim 30:033048611c01 301 //extern const char udc_bar_5[]; // Bar 11111
wim 13:24506ba22480 302
wim 30:033048611c01 303 //extern const char udc_ch_1[]; // Hor bars 4
wim 30:033048611c01 304 //extern const char udc_ch_2[]; // Hor bars 4 (inverted)
wim 30:033048611c01 305 //extern const char udc_ch_3[]; // Ver bars 3
wim 30:033048611c01 306 //extern const char udc_ch_4[]; // Ver bars 3 (inverted)
wim 30:033048611c01 307 //extern const char udc_ch_yr[]; // Year (kana)
wim 30:033048611c01 308 //extern const char udc_ch_mo[]; // Month (kana)
wim 30:033048611c01 309 //extern const char udc_ch_dy[]; // Day (kana)
wim 30:033048611c01 310 //extern const char udc_ch_mi[]; // minute (kana)
wim 11:9ec02df863a1 311
wim 11:9ec02df863a1 312 /** A TextLCD interface for driving 4-bit HD44780-based LCDs
wim 11:9ec02df863a1 313 *
wim 22:35742ec80c24 314 * @brief Currently supports 8x1, 8x2, 12x2, 12x4, 16x1, 16x2, 16x4, 20x2, 20x4, 24x2, 24x4, 40x2 and 40x4 panels
wim 27:22d5086f6ba6 315 * Interface options include direct mbed pins, I2C portexpander (PCF8474/PCF8574A or MCP23008) or SPI bus shiftregister (74595) and some native I2C or SPI devices
wim 11:9ec02df863a1 316 *
wim 11:9ec02df863a1 317 */
wim 21:9eb628d9e164 318 class TextLCD_Base : public Stream {
simon 1:ac48b187213c 319 public:
simon 1:ac48b187213c 320
simon 2:227356c7d12c 321 /** LCD panel format */
simon 1:ac48b187213c 322 enum LCDType {
wim 30:033048611c01 323 LCD8x1 = (LCD_T_A | LCD_T_C8 | LCD_T_R1), /**< 8x1 LCD panel */
wim 30:033048611c01 324 LCD8x2 = (LCD_T_A | LCD_T_C8 | LCD_T_R2), /**< 8x2 LCD panel */
wim 30:033048611c01 325 LCD8x2B = (LCD_T_D | LCD_T_C8 | LCD_T_R2), /**< 8x2 LCD panel (actually 16x1) */
wim 30:033048611c01 326 // LCD12x1 = (LCD_T_A | LCD_T_C12 | LCD_T_R1), /**< 12x1 LCD panel */
wim 30:033048611c01 327 LCD12x2 = (LCD_T_A | LCD_T_C12 | LCD_T_R2), /**< 12x2 LCD panel */
wim 30:033048611c01 328 LCD12x3D = (LCD_T_D | LCD_T_C12 | LCD_T_R3), /**< 12x3 LCD panel, special mode PCF21XX */
wim 30:033048611c01 329 LCD12x3D1 = (LCD_T_D1 | LCD_T_C12 | LCD_T_R3), /**< 12x3 LCD panel, special mode PCF21XX */
wim 30:033048611c01 330 LCD12x4 = (LCD_T_A | LCD_T_C12 | LCD_T_R4), /**< 12x4 LCD panel */
wim 30:033048611c01 331 LCD12x4D = (LCD_T_B | LCD_T_C12 | LCD_T_R4), /**< 12x4 LCD panel, special mode PCF21XX */
wim 30:033048611c01 332 LCD16x1 = (LCD_T_A | LCD_T_C16 | LCD_T_R1), /**< 16x1 LCD panel */
wim 30:033048611c01 333 LCD16x1C = (LCD_T_C | LCD_T_C16 | LCD_T_R1), /**< 16x1 LCD panel (actually 8x2) */
wim 30:033048611c01 334 LCD16x2 = (LCD_T_A | LCD_T_C16 | LCD_T_R2), /**< 16x2 LCD panel (default) */
wim 30:033048611c01 335 // LCD16x2B = (LCD_T_B | LCD_T_C16 | LCD_T_R2), /**< 16x2 LCD panel, alternate addressing, wrong.. */
wim 30:033048611c01 336 // LCD16x3D = (LCD_T_D | LCD_T_C16 | LCD_T_R3), /**< 16x3 LCD panel, special mode ST7036 */
wim 30:033048611c01 337 LCD16x4 = (LCD_T_A | LCD_T_C16 | LCD_T_R4), /**< 16x4 LCD panel */
wim 30:033048611c01 338 // LCD20x1 = (LCD_T_A | LCD_T_C20 | LCD_T_R1), /**< 20x1 LCD panel */
wim 30:033048611c01 339 LCD20x2 = (LCD_T_A | LCD_T_C20 | LCD_T_R2), /**< 20x2 LCD panel */
wim 30:033048611c01 340 LCD20x4 = (LCD_T_A | LCD_T_C20 | LCD_T_R4), /**< 20x4 LCD panel */
wim 30:033048611c01 341 LCD24x1 = (LCD_T_A | LCD_T_C24 | LCD_T_R1), /**< 24x1 LCD panel */
wim 30:033048611c01 342 LCD24x2 = (LCD_T_A | LCD_T_C24 | LCD_T_R2), /**< 24x2 LCD panel */
wim 30:033048611c01 343 LCD24x4D = (LCD_T_D | LCD_T_C24 | LCD_T_R4), /**< 24x4 LCD panel, special mode KS0078 */
wim 30:033048611c01 344 // LCD40x1 = (LCD_T_A | LCD_T_C40 | LCD_T_R1), /**< 40x1 LCD panel */
wim 30:033048611c01 345 LCD40x2 = (LCD_T_A | LCD_T_C40 | LCD_T_R2), /**< 40x2 LCD panel */
wim 30:033048611c01 346 LCD40x4 = (LCD_T_E | LCD_T_C40 | LCD_T_R4) /**< 40x4 LCD panel, Two controller version */
wim 30:033048611c01 347 };
wim 30:033048611c01 348
wim 30:033048611c01 349
wim 30:033048611c01 350 #if(0)
wim 30:033048611c01 351 /** LCD panel format */
wim 30:033048611c01 352 enum LCDType {
wim 8:03116f75b66e 353 LCD8x1, /**< 8x1 LCD panel */
wim 13:24506ba22480 354 LCD8x2, /**< 8x2 LCD panel */
wim 18:bd65dc10f27f 355 LCD8x2B, /**< 8x2 LCD panel (actually 16x1) */
wim 29:a3663151aa65 356 // LCD12x1, /**< 12x1 LCD panel */
wim 29:a3663151aa65 357 // LCD12x1B, /**< 12x1 LCD panel, special mode PCF21XX */
wim 15:b70ebfffb258 358 LCD12x2, /**< 12x2 LCD panel */
wim 29:a3663151aa65 359 LCD12x3B, /**< 12x3 LCD panel, special mode PCF21XX */
wim 30:033048611c01 360 // LCD12x3C, /**< 12x3 LCD panel, special mode PCF21XX */
wim 15:b70ebfffb258 361 LCD12x4, /**< 12x4 LCD panel */
wim 29:a3663151aa65 362 LCD12x4B, /**< 12x4 LCD panel, special mode PCF21XX */
wim 13:24506ba22480 363 LCD16x1, /**< 16x1 LCD panel (actually 8x2) */
wim 30:033048611c01 364 // LCD16x1B, /**< 16x1 LCD panel */
wim 8:03116f75b66e 365 LCD16x2, /**< 16x2 LCD panel (default) */
wim 8:03116f75b66e 366 LCD16x2B, /**< 16x2 LCD panel alternate addressing */
wim 29:a3663151aa65 367 // LCD16x3B, /**< 16x3 LCD panel, special mode ST7036 */
wim 8:03116f75b66e 368 LCD16x4, /**< 16x4 LCD panel */
wim 29:a3663151aa65 369 // LCD20x1, /**< 20x1 LCD panel */
wim 8:03116f75b66e 370 LCD20x2, /**< 20x2 LCD panel */
wim 8:03116f75b66e 371 LCD20x4, /**< 20x4 LCD panel */
wim 29:a3663151aa65 372 LCD24x4B, /**< 24x4 LCD panel, special mode KS0078 */
wim 29:a3663151aa65 373 LCD24x1, /**< 24x1 LCD panel */
wim 9:0893d986e717 374 LCD24x2, /**< 24x2 LCD panel */
wim 30:033048611c01 375 // LCD40x1, /**< 40x1 LCD panel */
wim 15:b70ebfffb258 376 LCD40x2, /**< 40x2 LCD panel */
wim 15:b70ebfffb258 377 LCD40x4 /**< 40x4 LCD panel, Two controller version */
simon 1:ac48b187213c 378 };
wim 30:033048611c01 379 #endif
simon 1:ac48b187213c 380
wim 30:033048611c01 381
wim 30:033048611c01 382 /** LCD Controller Device */
wim 30:033048611c01 383 enum LCDCtrl {
wim 30:033048611c01 384 HD44780 = 0, /**< HD44780 (default) */
wim 30:033048611c01 385 WS0010 = 1 | (LCD_C_SPI3_10 | LCD_C_BST), /**< WS0010 OLED Controller, 4/8 bit, SPI3 */
wim 30:033048611c01 386 ST7036 = 2 | (LCD_C_SPI4 | LCD_C_BST), /**< ST7036 3V3 with Booster, 4/8 bit, SPI4 */
wim 30:033048611c01 387 ST7032_3V3 = 3 | (LCD_C_SPI4 | LCD_C_I2C | LCD_C_BST), /**< ST7032 3V3 with Booster, 4/8 bit, SPI4, I2C */
wim 30:033048611c01 388 ST7032_5V = 4 | (LCD_C_SPI4 | LCD_C_I2C), /**< ST7032 5V no Booster, 4/8 bit, SPI4, I2C */
wim 30:033048611c01 389 KS0078 = 5, /**< KS0078 24x4 support, 4/8 bit */
wim 30:033048611c01 390 PCF2113_3V3 = 6 | (LCD_C_I2C | LCD_C_BST), /**< PCF2113 3V3 with Booster, 4/8 bit, I2C */
wim 30:033048611c01 391 PCF2116_3V3 = 7 | (LCD_C_I2C | LCD_C_BST), /**< PCF2116 3V3 with Booster, 4/8 bit, I2C */
wim 30:033048611c01 392 // PCF2116_5V = 8 | (LCD_C_I2C), /**< PCF2116 5V no Booster, 4/8 bit, I2C */
wim 30:033048611c01 393 AIP31068 = 9 | (LCD_C_SPI3_9 | LCD_C_I2C | LCD_C_BST) /**< AIP31068 I2C, SPI3 */
wim 30:033048611c01 394 };
wim 30:033048611c01 395
wim 30:033048611c01 396
wim 30:033048611c01 397 #if(0)
wim 19:c747b9e2e7b8 398 /** LCD Controller Device */
wim 19:c747b9e2e7b8 399 enum LCDCtrl {
wim 29:a3663151aa65 400 HD44780, /**< HD44780 (default) */
wim 30:033048611c01 401 WS0010, /**< WS0010 OLED Controller, 4/8 bit, SPI */
wim 29:a3663151aa65 402 ST7036, /**< ST7036 3V3 with Booster, 4/8 bit, SPI */
wim 29:a3663151aa65 403 ST7032_3V3, /**< ST7032 3V3 with Booster, 4/8 bit, SPI, I2C */
wim 29:a3663151aa65 404 ST7032_5V, /**< ST7032 5V no Booster, 4/8 bit, SPI, I2C */
wim 30:033048611c01 405 KS0078, /**< KS0078 24x4 support, 4/8 bit */
wim 29:a3663151aa65 406 PCF21XX_3V3, /**< PCF21XX 3V3 with Booster, 4/8 bit, I2C */
wim 29:a3663151aa65 407 // PCF21XX_5V /**< PCF21XX 5V no Booster, 4/8 bit, I2C */
wim 19:c747b9e2e7b8 408 };
wim 30:033048611c01 409 #endif
wim 19:c747b9e2e7b8 410
wim 10:dd9b3a696acd 411 /** LCD Cursor control */
wim 10:dd9b3a696acd 412 enum LCDCursor {
wim 17:652ab113bc2e 413 CurOff_BlkOff = 0x00, /**< Cursor Off, Blinking Char Off */
wim 17:652ab113bc2e 414 CurOn_BlkOff = 0x02, /**< Cursor On, Blinking Char Off */
wim 17:652ab113bc2e 415 CurOff_BlkOn = 0x01, /**< Cursor Off, Blinking Char On */
wim 17:652ab113bc2e 416 CurOn_BlkOn = 0x03 /**< Cursor On, Blinking Char On */
wim 17:652ab113bc2e 417 };
wim 17:652ab113bc2e 418
wim 17:652ab113bc2e 419 /** LCD Display control */
wim 17:652ab113bc2e 420 enum LCDMode {
wim 17:652ab113bc2e 421 DispOff = 0x00, /**< Display Off */
wim 17:652ab113bc2e 422 DispOn = 0x04 /**< Display On */
wim 10:dd9b3a696acd 423 };
wim 10:dd9b3a696acd 424
wim 20:e0da005a777f 425 /** LCD Backlight control */
wim 20:e0da005a777f 426 enum LCDBacklight {
wim 20:e0da005a777f 427 LightOff, /**< Backlight Off */
wim 20:e0da005a777f 428 LightOn /**< Backlight On */
wim 20:e0da005a777f 429 };
wim 10:dd9b3a696acd 430
simon 2:227356c7d12c 431 #if DOXYGEN_ONLY
simon 2:227356c7d12c 432 /** Write a character to the LCD
simon 2:227356c7d12c 433 *
simon 2:227356c7d12c 434 * @param c The character to write to the display
simon 2:227356c7d12c 435 */
simon 2:227356c7d12c 436 int putc(int c);
simon 2:227356c7d12c 437
simon 2:227356c7d12c 438 /** Write a formated string to the LCD
simon 2:227356c7d12c 439 *
simon 2:227356c7d12c 440 * @param format A printf-style format string, followed by the
simon 2:227356c7d12c 441 * variables to use in formating the string.
simon 2:227356c7d12c 442 */
simon 2:227356c7d12c 443 int printf(const char* format, ...);
simon 2:227356c7d12c 444 #endif
simon 2:227356c7d12c 445
wim 29:a3663151aa65 446 /** Locate cursor to a screen column and row
simon 2:227356c7d12c 447 *
simon 2:227356c7d12c 448 * @param column The horizontal position from the left, indexed from 0
simon 2:227356c7d12c 449 * @param row The vertical position from the top, indexed from 0
simon 2:227356c7d12c 450 */
simon 1:ac48b187213c 451 void locate(int column, int row);
simon 2:227356c7d12c 452
wim 10:dd9b3a696acd 453 /** Return the memoryaddress of screen column and row location
wim 10:dd9b3a696acd 454 *
wim 10:dd9b3a696acd 455 * @param column The horizontal position from the left, indexed from 0
wim 10:dd9b3a696acd 456 * @param row The vertical position from the top, indexed from 0
wim 10:dd9b3a696acd 457 * @param return The memoryaddress of screen column and row location
wim 10:dd9b3a696acd 458 */
wim 30:033048611c01 459 int getAddress(int column, int row);
wim 10:dd9b3a696acd 460
wim 10:dd9b3a696acd 461 /** Set the memoryaddress of screen column and row location
wim 10:dd9b3a696acd 462 *
wim 10:dd9b3a696acd 463 * @param column The horizontal position from the left, indexed from 0
wim 10:dd9b3a696acd 464 * @param row The vertical position from the top, indexed from 0
wim 10:dd9b3a696acd 465 */
wim 9:0893d986e717 466 void setAddress(int column, int row);
wim 9:0893d986e717 467
wim 22:35742ec80c24 468 /** Clear the screen and locate to 0,0
wim 22:35742ec80c24 469 */
simon 1:ac48b187213c 470 void cls();
simon 2:227356c7d12c 471
wim 10:dd9b3a696acd 472 /** Return the number of rows
wim 10:dd9b3a696acd 473 *
wim 10:dd9b3a696acd 474 * @param return The number of rows
wim 10:dd9b3a696acd 475 */
simon 1:ac48b187213c 476 int rows();
wim 10:dd9b3a696acd 477
wim 10:dd9b3a696acd 478 /** Return the number of columns
wim 10:dd9b3a696acd 479 *
wim 10:dd9b3a696acd 480 * @param return The number of columns
wim 10:dd9b3a696acd 481 */
wim 10:dd9b3a696acd 482 int columns();
simon 2:227356c7d12c 483
wim 11:9ec02df863a1 484 /** Set the Cursormode
wim 11:9ec02df863a1 485 *
wim 17:652ab113bc2e 486 * @param cursorMode The Cursor mode (CurOff_BlkOff, CurOn_BlkOff, CurOff_BlkOn, CurOn_BlkOn)
wim 11:9ec02df863a1 487 */
wim 17:652ab113bc2e 488 void setCursor(LCDCursor cursorMode);
wim 17:652ab113bc2e 489
wim 17:652ab113bc2e 490 /** Set the Displaymode
wim 17:652ab113bc2e 491 *
wim 17:652ab113bc2e 492 * @param displayMode The Display mode (DispOff, DispOn)
wim 17:652ab113bc2e 493 */
wim 21:9eb628d9e164 494 void setMode(LCDMode displayMode);
wim 11:9ec02df863a1 495
wim 20:e0da005a777f 496 /** Set the Backlight mode
wim 20:e0da005a777f 497 *
wim 21:9eb628d9e164 498 * @param backlightMode The Backlight mode (LightOff, LightOn)
wim 20:e0da005a777f 499 */
wim 21:9eb628d9e164 500 void setBacklight(LCDBacklight backlightMode);
wim 20:e0da005a777f 501
wim 11:9ec02df863a1 502 /** Set User Defined Characters
wim 11:9ec02df863a1 503 *
wim 11:9ec02df863a1 504 * @param unsigned char c The Index of the UDC (0..7)
wim 12:6bf9d9957d31 505 * @param char *udc_data The bitpatterns for the UDC (8 bytes of 5 significant bits)
wim 11:9ec02df863a1 506 */
wim 11:9ec02df863a1 507 void setUDC(unsigned char c, char *udc_data);
wim 11:9ec02df863a1 508
wim 29:a3663151aa65 509 //test
wim 30:033048611c01 510 // void _initCtrl();
wim 29:a3663151aa65 511
simon 1:ac48b187213c 512 protected:
wim 13:24506ba22480 513
wim 21:9eb628d9e164 514 /** LCD controller select, mainly used for LCD40x4
wim 21:9eb628d9e164 515 */
wim 19:c747b9e2e7b8 516 enum _LCDCtrl_Idx {
wim 15:b70ebfffb258 517 _LCDCtrl_0, /*< Primary */
wim 15:b70ebfffb258 518 _LCDCtrl_1, /*< Secondary */
wim 15:b70ebfffb258 519 };
wim 21:9eb628d9e164 520
wim 21:9eb628d9e164 521 /** Create a TextLCD_Base interface
wim 21:9eb628d9e164 522 * @brief Base class, can not be instantiated
wim 21:9eb628d9e164 523 *
wim 21:9eb628d9e164 524 * @param type Sets the panel size/addressing mode (default = LCD16x2)
wim 21:9eb628d9e164 525 * @param ctrl LCD controller (default = HD44780)
wim 21:9eb628d9e164 526 */
wim 21:9eb628d9e164 527 TextLCD_Base(LCDType type = LCD16x2, LCDCtrl ctrl = HD44780);
wim 15:b70ebfffb258 528
simon 1:ac48b187213c 529 // Stream implementation functions
simon 1:ac48b187213c 530 virtual int _putc(int value);
simon 1:ac48b187213c 531 virtual int _getc();
simon 1:ac48b187213c 532
wim 29:a3663151aa65 533 /** Low level method for LCD controller
wim 21:9eb628d9e164 534 */
wim 13:24506ba22480 535 void _init();
wim 29:a3663151aa65 536
wim 29:a3663151aa65 537 /** Low level initialisation method for LCD controller
wim 29:a3663151aa65 538 */
wim 30:033048611c01 539 void _initCtrl();
wim 29:a3663151aa65 540
wim 29:a3663151aa65 541 /** Low level character address set method
wim 29:a3663151aa65 542 */
wim 13:24506ba22480 543 int _address(int column, int row);
wim 29:a3663151aa65 544
wim 29:a3663151aa65 545 /** Low level cursor enable or disable method
wim 29:a3663151aa65 546 */
wim 21:9eb628d9e164 547 void _setCursor(LCDCursor show);
wim 29:a3663151aa65 548
wim 29:a3663151aa65 549 /** Low level method to store user defined characters for current controller
wim 29:a3663151aa65 550 */
wim 17:652ab113bc2e 551 void _setUDC(unsigned char c, char *udc_data);
wim 29:a3663151aa65 552
wim 29:a3663151aa65 553 /** Low level method to restore the cursortype and display mode for current controller
wim 29:a3663151aa65 554 */
wim 21:9eb628d9e164 555 void _setCursorAndDisplayMode(LCDMode displayMode, LCDCursor cursorType);
wim 13:24506ba22480 556
wim 29:a3663151aa65 557 /** Low level nibble write operation to LCD controller (serial or parallel)
wim 21:9eb628d9e164 558 */
wim 17:652ab113bc2e 559 void _writeNibble(int value);
wim 29:a3663151aa65 560
wim 29:a3663151aa65 561 /** Low level command byte write operation to LCD controller.
wim 29:a3663151aa65 562 * Methods resets the RS bit and provides the required timing for the command.
wim 29:a3663151aa65 563 */
wim 15:b70ebfffb258 564 void _writeCommand(int command);
wim 29:a3663151aa65 565
wim 29:a3663151aa65 566 /** Low level data byte write operation to LCD controller (serial or parallel).
wim 29:a3663151aa65 567 * Methods sets the RS bit and provides the required timing for the data.
wim 29:a3663151aa65 568 */
wim 15:b70ebfffb258 569 void _writeData(int data);
wim 15:b70ebfffb258 570
wim 29:a3663151aa65 571 /** Pure Virtual Low level writes to LCD Bus (serial or parallel)
wim 29:a3663151aa65 572 * Set the Enable pin.
wim 29:a3663151aa65 573 */
wim 29:a3663151aa65 574 virtual void _setEnable(bool value) = 0;
wim 29:a3663151aa65 575
wim 21:9eb628d9e164 576 /** Pure Virtual Low level writes to LCD Bus (serial or parallel)
wim 29:a3663151aa65 577 * Set the RS pin ( 0 = Command, 1 = Data).
wim 29:a3663151aa65 578 */
wim 21:9eb628d9e164 579 virtual void _setRS(bool value) = 0;
wim 29:a3663151aa65 580
wim 29:a3663151aa65 581 /** Pure Virtual Low level writes to LCD Bus (serial or parallel)
wim 29:a3663151aa65 582 * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim 29:a3663151aa65 583 */
wim 21:9eb628d9e164 584 virtual void _setBL(bool value) = 0;
wim 29:a3663151aa65 585
wim 29:a3663151aa65 586 /** Pure Virtual Low level writes to LCD Bus (serial or parallel)
wim 29:a3663151aa65 587 * Set the databus value (4 bit).
wim 29:a3663151aa65 588 */
wim 21:9eb628d9e164 589 virtual void _setData(int value) = 0;
wim 13:24506ba22480 590
wim 29:a3663151aa65 591 /** Low level byte write operation to LCD controller (serial or parallel)
wim 29:a3663151aa65 592 * Depending on the RS pin this byte will be interpreted as data or command
wim 29:a3663151aa65 593 */
wim 29:a3663151aa65 594 virtual void _writeByte(int value);
wim 13:24506ba22480 595
wim 13:24506ba22480 596 //Display type
simon 1:ac48b187213c 597 LCDType _type;
wim 30:033048611c01 598 int _nr_cols;
wim 30:033048611c01 599 int _nr_rows;
wim 30:033048611c01 600 int _addr_mode;
wim 30:033048611c01 601
wim 21:9eb628d9e164 602 //Display mode
wim 17:652ab113bc2e 603 LCDMode _currentMode;
wim 17:652ab113bc2e 604
wim 19:c747b9e2e7b8 605 //Controller type
wim 19:c747b9e2e7b8 606 LCDCtrl _ctrl;
wim 19:c747b9e2e7b8 607
wim 15:b70ebfffb258 608 //Controller select, mainly used for LCD40x4
wim 19:c747b9e2e7b8 609 _LCDCtrl_Idx _ctrl_idx;
wim 15:b70ebfffb258 610
wim 13:24506ba22480 611 // Cursor
simon 1:ac48b187213c 612 int _column;
simon 1:ac48b187213c 613 int _row;
wim 15:b70ebfffb258 614 LCDCursor _currentCursor;
simon 1:ac48b187213c 615 };
simon 1:ac48b187213c 616
wim 23:d47f226efb24 617 //--------- End TextLCD_Base -----------
wim 22:35742ec80c24 618
wim 22:35742ec80c24 619
wim 22:35742ec80c24 620
wim 23:d47f226efb24 621 //--------- Start TextLCD Bus -----------
wim 21:9eb628d9e164 622
wim 21:9eb628d9e164 623 /** Create a TextLCD interface for using regular mbed pins
wim 21:9eb628d9e164 624 *
wim 21:9eb628d9e164 625 */
wim 21:9eb628d9e164 626 class TextLCD : public TextLCD_Base {
wim 21:9eb628d9e164 627 public:
wim 21:9eb628d9e164 628 /** Create a TextLCD interface for using regular mbed pins
wim 21:9eb628d9e164 629 *
wim 21:9eb628d9e164 630 * @param rs Instruction/data control line
wim 21:9eb628d9e164 631 * @param e Enable line (clock)
wim 21:9eb628d9e164 632 * @param d4-d7 Data lines for using as a 4-bit interface
wim 21:9eb628d9e164 633 * @param type Sets the panel size/addressing mode (default = LCD16x2)
wim 21:9eb628d9e164 634 * @param bl Backlight control line (optional, default = NC)
wim 21:9eb628d9e164 635 * @param e2 Enable2 line (clock for second controller, LCD40x4 only)
wim 21:9eb628d9e164 636 * @param ctrl LCD controller (default = HD44780)
wim 21:9eb628d9e164 637 */
wim 21:9eb628d9e164 638 TextLCD(PinName rs, PinName e, PinName d4, PinName d5, PinName d6, PinName d7, LCDType type = LCD16x2, PinName bl = NC, PinName e2 = NC, LCDCtrl ctrl = HD44780);
wim 21:9eb628d9e164 639
wim 22:35742ec80c24 640 /** Destruct a TextLCD interface for using regular mbed pins
wim 22:35742ec80c24 641 *
wim 22:35742ec80c24 642 * @param none
wim 22:35742ec80c24 643 * @return none
wim 22:35742ec80c24 644 */
wim 22:35742ec80c24 645 virtual ~TextLCD();
wim 22:35742ec80c24 646
wim 21:9eb628d9e164 647 private:
wim 29:a3663151aa65 648
wim 29:a3663151aa65 649 /** Implementation of pure Virtual Low level writes to LCD Bus (parallel)
wim 29:a3663151aa65 650 * Set the Enable pin.
wim 29:a3663151aa65 651 */
wim 21:9eb628d9e164 652 virtual void _setEnable(bool value);
wim 29:a3663151aa65 653
wim 29:a3663151aa65 654 /** Implementation of pure Virtual Low level writes to LCD Bus (parallel)
wim 29:a3663151aa65 655 * Set the RS pin ( 0 = Command, 1 = Data).
wim 29:a3663151aa65 656 */
wim 21:9eb628d9e164 657 virtual void _setRS(bool value);
wim 29:a3663151aa65 658
wim 29:a3663151aa65 659 /** Implementation of pure Virtual Low level writes to LCD Bus (parallel)
wim 29:a3663151aa65 660 * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim 29:a3663151aa65 661 */
wim 21:9eb628d9e164 662 virtual void _setBL(bool value);
wim 29:a3663151aa65 663
wim 29:a3663151aa65 664 /** Implementation of pure Virtual Low level writes to LCD Bus (parallel)
wim 29:a3663151aa65 665 * Set the databus value (4 bit).
wim 29:a3663151aa65 666 */
wim 21:9eb628d9e164 667 virtual void _setData(int value);
wim 21:9eb628d9e164 668
wim 29:a3663151aa65 669
wim 22:35742ec80c24 670 /** Regular mbed pins bus
wim 22:35742ec80c24 671 */
wim 22:35742ec80c24 672 DigitalOut _rs, _e;
wim 22:35742ec80c24 673 BusOut _d;
wim 22:35742ec80c24 674
wim 22:35742ec80c24 675 /** Optional Hardware pins for the Backlight and LCD40x4 device
wim 22:35742ec80c24 676 * Default PinName value is NC, must be used as pointer to avoid issues with mbed lib and DigitalOut pins
wim 22:35742ec80c24 677 */
wim 22:35742ec80c24 678 DigitalOut *_bl, *_e2;
wim 21:9eb628d9e164 679 };
wim 21:9eb628d9e164 680
wim 22:35742ec80c24 681
wim 23:d47f226efb24 682 //----------- End TextLCD ---------------
wim 21:9eb628d9e164 683
wim 21:9eb628d9e164 684
wim 23:d47f226efb24 685 //--------- Start TextLCD_I2C -----------
wim 22:35742ec80c24 686
wim 22:35742ec80c24 687
wim 26:bd897a001012 688 /** Create a TextLCD interface using an I2C PCF8574 (or PCF8574A) or MCP23008 portexpander
wim 21:9eb628d9e164 689 *
wim 21:9eb628d9e164 690 */
wim 21:9eb628d9e164 691 class TextLCD_I2C : public TextLCD_Base {
wim 21:9eb628d9e164 692 public:
wim 26:bd897a001012 693 /** Create a TextLCD interface using an I2C PCF8574 (or PCF8574A) or MCP23008 portexpander
wim 21:9eb628d9e164 694 *
wim 21:9eb628d9e164 695 * @param i2c I2C Bus
wim 26:bd897a001012 696 * @param deviceAddress I2C slave address (PCF8574 or PCF8574A, default = PCF8574_SA0 = 0x40)
wim 21:9eb628d9e164 697 * @param type Sets the panel size/addressing mode (default = LCD16x2)
wim 21:9eb628d9e164 698 * @param ctrl LCD controller (default = HD44780)
wim 21:9eb628d9e164 699 */
wim 26:bd897a001012 700 TextLCD_I2C(I2C *i2c, char deviceAddress = PCF8574_SA0, LCDType type = LCD16x2, LCDCtrl ctrl = HD44780);
wim 21:9eb628d9e164 701
wim 21:9eb628d9e164 702 private:
wim 29:a3663151aa65 703
wim 29:a3663151aa65 704 /** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
wim 29:a3663151aa65 705 * Set the Enable pin.
wim 29:a3663151aa65 706 */
wim 21:9eb628d9e164 707 virtual void _setEnable(bool value);
wim 29:a3663151aa65 708
wim 29:a3663151aa65 709 /** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
wim 29:a3663151aa65 710 * Set the RS pin ( 0 = Command, 1 = Data).
wim 29:a3663151aa65 711 */
wim 21:9eb628d9e164 712 virtual void _setRS(bool value);
wim 29:a3663151aa65 713
wim 29:a3663151aa65 714 /** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
wim 29:a3663151aa65 715 * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim 29:a3663151aa65 716 */
wim 21:9eb628d9e164 717 virtual void _setBL(bool value);
wim 29:a3663151aa65 718
wim 29:a3663151aa65 719 /** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
wim 29:a3663151aa65 720 * Set the databus value (4 bit).
wim 29:a3663151aa65 721 */
wim 29:a3663151aa65 722 virtual void _setData(int value);
wim 30:033048611c01 723
wim 29:a3663151aa65 724 /** Write data to MCP23008 I2C portexpander
wim 29:a3663151aa65 725 * @param reg register to write
wim 29:a3663151aa65 726 * @param value data to write
wim 29:a3663151aa65 727 * @return none
wim 29:a3663151aa65 728 *
wim 29:a3663151aa65 729 */
wim 26:bd897a001012 730 void _write_register (int reg, int value);
wim 21:9eb628d9e164 731
wim 21:9eb628d9e164 732 //I2C bus
wim 21:9eb628d9e164 733 I2C *_i2c;
wim 21:9eb628d9e164 734 char _slaveAddress;
wim 21:9eb628d9e164 735
wim 21:9eb628d9e164 736 // Internal bus mirror value for serial bus only
wim 30:033048611c01 737 char _lcd_bus;
wim 21:9eb628d9e164 738 };
wim 21:9eb628d9e164 739
wim 23:d47f226efb24 740 //---------- End TextLCD_I2C ------------
wim 22:35742ec80c24 741
wim 22:35742ec80c24 742
wim 23:d47f226efb24 743 //--------- Start TextLCD_SPI -----------
wim 22:35742ec80c24 744
wim 21:9eb628d9e164 745 /** Create a TextLCD interface using an SPI 74595 portexpander
wim 21:9eb628d9e164 746 *
wim 21:9eb628d9e164 747 */
wim 21:9eb628d9e164 748 class TextLCD_SPI : public TextLCD_Base {
wim 21:9eb628d9e164 749 public:
wim 21:9eb628d9e164 750 /** Create a TextLCD interface using an SPI 74595 portexpander
wim 21:9eb628d9e164 751 *
wim 21:9eb628d9e164 752 * @param spi SPI Bus
wim 21:9eb628d9e164 753 * @param cs chip select pin (active low)
wim 21:9eb628d9e164 754 * @param type Sets the panel size/addressing mode (default = LCD16x2)
wim 21:9eb628d9e164 755 * @param ctrl LCD controller (default = HD44780)
wim 21:9eb628d9e164 756 */
wim 21:9eb628d9e164 757 TextLCD_SPI(SPI *spi, PinName cs, LCDType type = LCD16x2, LCDCtrl ctrl = HD44780);
wim 21:9eb628d9e164 758
wim 21:9eb628d9e164 759 private:
wim 29:a3663151aa65 760
wim 29:a3663151aa65 761 /** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
wim 29:a3663151aa65 762 * Set the Enable pin.
wim 29:a3663151aa65 763 */
wim 21:9eb628d9e164 764 virtual void _setEnable(bool value);
wim 29:a3663151aa65 765
wim 29:a3663151aa65 766 /** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
wim 29:a3663151aa65 767 * Set the RS pin ( 0 = Command, 1 = Data).
wim 29:a3663151aa65 768 */
wim 21:9eb628d9e164 769 virtual void _setRS(bool value);
wim 29:a3663151aa65 770
wim 29:a3663151aa65 771 /** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
wim 29:a3663151aa65 772 * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim 29:a3663151aa65 773 */
wim 21:9eb628d9e164 774 virtual void _setBL(bool value);
wim 29:a3663151aa65 775
wim 29:a3663151aa65 776 /** Implementation of pure Virtual Low level writes to LCD Bus (serial expander)
wim 29:a3663151aa65 777 * Set the databus value (4 bit).
wim 29:a3663151aa65 778 */
wim 21:9eb628d9e164 779 virtual void _setData(int value);
wim 29:a3663151aa65 780
wim 29:a3663151aa65 781 /** Implementation of Low level writes to LCD Bus (serial expander)
wim 29:a3663151aa65 782 * Set the CS pin (0 = select, 1 = deselect).
wim 29:a3663151aa65 783 */
wim 21:9eb628d9e164 784 virtual void _setCS(bool value);
wim 21:9eb628d9e164 785
wim 29:a3663151aa65 786 ///** Low level writes to LCD serial bus only (serial expander)
wim 29:a3663151aa65 787 // */
wim 29:a3663151aa65 788 // void _writeBus();
wim 21:9eb628d9e164 789
wim 21:9eb628d9e164 790 // SPI bus
wim 21:9eb628d9e164 791 SPI *_spi;
wim 21:9eb628d9e164 792 DigitalOut _cs;
wim 21:9eb628d9e164 793
wim 21:9eb628d9e164 794 // Internal bus mirror value for serial bus only
wim 21:9eb628d9e164 795 char _lcd_bus;
wim 21:9eb628d9e164 796 };
wim 21:9eb628d9e164 797
wim 23:d47f226efb24 798 //---------- End TextLCD_SPI ------------
wim 21:9eb628d9e164 799
Sissors 24:fb3399713710 800
wim 26:bd897a001012 801 //--------- Start TextLCD_SPI_N -----------
Sissors 24:fb3399713710 802
wim 30:033048611c01 803 /** Create a TextLCD interface using a controller with native SPI4 interface
Sissors 24:fb3399713710 804 *
Sissors 24:fb3399713710 805 */
wim 25:6162b31128c9 806 class TextLCD_SPI_N : public TextLCD_Base {
Sissors 24:fb3399713710 807 public:
wim 30:033048611c01 808 /** Create a TextLCD interface using a controller with native SPI4 interface
Sissors 24:fb3399713710 809 *
Sissors 24:fb3399713710 810 * @param spi SPI Bus
Sissors 24:fb3399713710 811 * @param cs chip select pin (active low)
Sissors 24:fb3399713710 812 * @param rs Instruction/data control line
Sissors 24:fb3399713710 813 * @param type Sets the panel size/addressing mode (default = LCD16x2)
Sissors 24:fb3399713710 814 * @param bl Backlight control line (optional, default = NC)
wim 26:bd897a001012 815 * @param ctrl LCD controller (default = ST7032_3V3)
Sissors 24:fb3399713710 816 */
wim 26:bd897a001012 817 TextLCD_SPI_N(SPI *spi, PinName cs, PinName rs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = ST7032_3V3);
wim 25:6162b31128c9 818 virtual ~TextLCD_SPI_N(void);
Sissors 24:fb3399713710 819
Sissors 24:fb3399713710 820 private:
wim 29:a3663151aa65 821
wim 29:a3663151aa65 822 /** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim 29:a3663151aa65 823 * Set the Enable pin.
wim 29:a3663151aa65 824 */
Sissors 24:fb3399713710 825 virtual void _setEnable(bool value);
wim 29:a3663151aa65 826
wim 29:a3663151aa65 827 /** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim 29:a3663151aa65 828 * Set the RS pin ( 0 = Command, 1 = Data).
wim 29:a3663151aa65 829 */
Sissors 24:fb3399713710 830 virtual void _setRS(bool value);
wim 29:a3663151aa65 831
wim 29:a3663151aa65 832 /** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim 29:a3663151aa65 833 * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim 29:a3663151aa65 834 */
Sissors 24:fb3399713710 835 virtual void _setBL(bool value);
wim 29:a3663151aa65 836
wim 29:a3663151aa65 837 /** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim 29:a3663151aa65 838 * Set the databus value (4 bit).
wim 29:a3663151aa65 839 */
Sissors 24:fb3399713710 840 virtual void _setData(int value);
wim 29:a3663151aa65 841
wim 29:a3663151aa65 842 /** Low level writes to LCD serial bus only (serial native)
wim 29:a3663151aa65 843 */
Sissors 24:fb3399713710 844 virtual void _writeByte(int value);
Sissors 24:fb3399713710 845
Sissors 24:fb3399713710 846 // SPI bus
Sissors 24:fb3399713710 847 SPI *_spi;
Sissors 24:fb3399713710 848 DigitalOut _cs;
Sissors 24:fb3399713710 849 DigitalOut _rs;
wim 30:033048611c01 850
wim 30:033048611c01 851 //Backlight
Sissors 24:fb3399713710 852 DigitalOut *_bl;
Sissors 24:fb3399713710 853 };
Sissors 24:fb3399713710 854
wim 25:6162b31128c9 855 //---------- End TextLCD_SPI_N ------------
Sissors 24:fb3399713710 856
wim 26:bd897a001012 857
wim 30:033048611c01 858 #if(0)
wim 30:033048611c01 859 //Code checked out on logic analyser. Not yet tested on hardware..
wim 30:033048611c01 860
wim 30:033048611c01 861 //------- Start TextLCD_SPI_N_3_9 ---------
wim 30:033048611c01 862
wim 30:033048611c01 863 /** Create a TextLCD interface using a controller with native SPI3 9 bits interface
wim 30:033048611c01 864 * Note: current mbed libs only support SPI 9 bit mode for NXP platforms
wim 30:033048611c01 865 *
wim 30:033048611c01 866 */
wim 30:033048611c01 867 class TextLCD_SPI_N_3_9 : public TextLCD_Base {
wim 30:033048611c01 868 public:
wim 30:033048611c01 869 /** Create a TextLCD interface using a controller with native SPI3 9 bits interface
wim 30:033048611c01 870 * Note: current mbed libs only support SPI 9 bit mode for NXP platforms
wim 30:033048611c01 871 *
wim 30:033048611c01 872 * @param spi SPI Bus
wim 30:033048611c01 873 * @param cs chip select pin (active low)
wim 30:033048611c01 874 * @param type Sets the panel size/addressing mode (default = LCD16x2)
wim 30:033048611c01 875 * @param bl Backlight control line (optional, default = NC)
wim 30:033048611c01 876 * @param ctrl LCD controller (default = AIP31068)
wim 30:033048611c01 877 */
wim 30:033048611c01 878 TextLCD_SPI_N_3_9(SPI *spi, PinName cs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = AIP31068);
wim 30:033048611c01 879 virtual ~TextLCD_SPI_N_3_9(void);
wim 30:033048611c01 880
wim 30:033048611c01 881 private:
wim 30:033048611c01 882
wim 30:033048611c01 883 /** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim 30:033048611c01 884 * Set the Enable pin.
wim 30:033048611c01 885 */
wim 30:033048611c01 886 virtual void _setEnable(bool value);
wim 30:033048611c01 887
wim 30:033048611c01 888 /** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim 30:033048611c01 889 * Set the RS pin ( 0 = Command, 1 = Data).
wim 30:033048611c01 890 */
wim 30:033048611c01 891 virtual void _setRS(bool value);
wim 30:033048611c01 892
wim 30:033048611c01 893 /** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim 30:033048611c01 894 * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim 30:033048611c01 895 */
wim 30:033048611c01 896 virtual void _setBL(bool value);
wim 30:033048611c01 897
wim 30:033048611c01 898 /** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim 30:033048611c01 899 * Set the databus value (4 bit).
wim 30:033048611c01 900 */
wim 30:033048611c01 901 virtual void _setData(int value);
wim 30:033048611c01 902
wim 30:033048611c01 903 /** Low level writes to LCD serial bus only (serial native)
wim 30:033048611c01 904 */
wim 30:033048611c01 905 virtual void _writeByte(int value);
wim 30:033048611c01 906
wim 30:033048611c01 907 // SPI bus
wim 30:033048611c01 908 SPI *_spi;
wim 30:033048611c01 909 DigitalOut _cs;
wim 30:033048611c01 910
wim 30:033048611c01 911 // controlbyte to select between data and command. Internal value for serial bus only
wim 30:033048611c01 912 char _controlbyte;
wim 30:033048611c01 913
wim 30:033048611c01 914 //Backlight
wim 30:033048611c01 915 DigitalOut *_bl;
wim 30:033048611c01 916 };
wim 30:033048611c01 917
wim 30:033048611c01 918 //-------- End TextLCD_SPI_N_3_9 ----------
wim 30:033048611c01 919 #endif
wim 30:033048611c01 920
wim 30:033048611c01 921
wim 30:033048611c01 922 #if(0)
wim 30:033048611c01 923 //Code checked out on logic analyser. Not yet tested on hardware..
wim 30:033048611c01 924
wim 30:033048611c01 925 //------- Start TextLCD_SPI_N_3_10 ---------
wim 30:033048611c01 926
wim 30:033048611c01 927 /** Create a TextLCD interface using a controller with native SPI3 10 bits interface
wim 30:033048611c01 928 * Note: current mbed libs only support SPI 10 bit mode for NXP platforms
wim 30:033048611c01 929 *
wim 30:033048611c01 930 */
wim 30:033048611c01 931 class TextLCD_SPI_N_3_10 : public TextLCD_Base {
wim 30:033048611c01 932 public:
wim 30:033048611c01 933 /** Create a TextLCD interface using a controller with native SPI3 10 bits interface
wim 30:033048611c01 934 * Note: current mbed libs only support SPI 10 bit mode for NXP platforms
wim 30:033048611c01 935 *
wim 30:033048611c01 936 * @param spi SPI Bus
wim 30:033048611c01 937 * @param cs chip select pin (active low)
wim 30:033048611c01 938 * @param type Sets the panel size/addressing mode (default = LCD16x2)
wim 30:033048611c01 939 * @param bl Backlight control line (optional, default = NC)
wim 30:033048611c01 940 * @param ctrl LCD controller (default = AIP31068)
wim 30:033048611c01 941 */
wim 30:033048611c01 942 TextLCD_SPI_N_3_10(SPI *spi, PinName cs, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = AIP31068);
wim 30:033048611c01 943 virtual ~TextLCD_SPI_N_3_10(void);
wim 30:033048611c01 944
wim 30:033048611c01 945 private:
wim 30:033048611c01 946
wim 30:033048611c01 947 /** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim 30:033048611c01 948 * Set the Enable pin.
wim 30:033048611c01 949 */
wim 30:033048611c01 950 virtual void _setEnable(bool value);
wim 30:033048611c01 951
wim 30:033048611c01 952 /** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim 30:033048611c01 953 * Set the RS pin ( 0 = Command, 1 = Data).
wim 30:033048611c01 954 */
wim 30:033048611c01 955 virtual void _setRS(bool value);
wim 30:033048611c01 956
wim 30:033048611c01 957 /** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim 30:033048611c01 958 * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim 30:033048611c01 959 */
wim 30:033048611c01 960 virtual void _setBL(bool value);
wim 30:033048611c01 961
wim 30:033048611c01 962 /** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim 30:033048611c01 963 * Set the databus value (4 bit).
wim 30:033048611c01 964 */
wim 30:033048611c01 965 virtual void _setData(int value);
wim 30:033048611c01 966
wim 30:033048611c01 967 /** Low level writes to LCD serial bus only (serial native)
wim 30:033048611c01 968 */
wim 30:033048611c01 969 virtual void _writeByte(int value);
wim 30:033048611c01 970
wim 30:033048611c01 971 // SPI bus
wim 30:033048611c01 972 SPI *_spi;
wim 30:033048611c01 973 DigitalOut _cs;
wim 30:033048611c01 974
wim 30:033048611c01 975 // controlbyte to select between data and command. Internal value for serial bus only
wim 30:033048611c01 976 char _controlbyte;
wim 30:033048611c01 977
wim 30:033048611c01 978 //Backlight
wim 30:033048611c01 979 DigitalOut *_bl;
wim 30:033048611c01 980 };
wim 30:033048611c01 981
wim 30:033048611c01 982 //-------- End TextLCD_SPI_N_3_10 ----------
wim 30:033048611c01 983 #endif
wim 30:033048611c01 984
wim 30:033048611c01 985
wim 26:bd897a001012 986 //--------- Start TextLCD_I2C_N -----------
wim 26:bd897a001012 987
wim 26:bd897a001012 988 /** Create a TextLCD interface using a controller with native I2C interface
wim 26:bd897a001012 989 *
wim 26:bd897a001012 990 */
wim 26:bd897a001012 991 class TextLCD_I2C_N : public TextLCD_Base {
wim 26:bd897a001012 992 public:
wim 26:bd897a001012 993 /** Create a TextLCD interface using a controller with native I2C interface
wim 26:bd897a001012 994 *
wim 26:bd897a001012 995 * @param i2c I2C Bus
wim 28:30fa94f7341c 996 * @param deviceAddress I2C slave address (default = ST7032_SA = 0x7C)
wim 26:bd897a001012 997 * @param type Sets the panel size/addressing mode (default = LCD16x2)
wim 28:30fa94f7341c 998 * @param bl Backlight control line (optional, default = NC)
wim 26:bd897a001012 999 * @param ctrl LCD controller (default = ST7032_3V3)
wim 26:bd897a001012 1000 */
wim 28:30fa94f7341c 1001 TextLCD_I2C_N(I2C *i2c, char deviceAddress = ST7032_SA, LCDType type = LCD16x2, PinName bl = NC, LCDCtrl ctrl = ST7032_3V3);
wim 26:bd897a001012 1002 virtual ~TextLCD_I2C_N(void);
wim 26:bd897a001012 1003
wim 26:bd897a001012 1004 private:
wim 29:a3663151aa65 1005
wim 29:a3663151aa65 1006 /** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim 29:a3663151aa65 1007 * Set the Enable pin.
wim 29:a3663151aa65 1008 */
wim 26:bd897a001012 1009 virtual void _setEnable(bool value);
wim 29:a3663151aa65 1010
wim 29:a3663151aa65 1011 /** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim 29:a3663151aa65 1012 * Set the RS pin ( 0 = Command, 1 = Data).
wim 29:a3663151aa65 1013 */
wim 26:bd897a001012 1014 virtual void _setRS(bool value);
wim 29:a3663151aa65 1015
wim 29:a3663151aa65 1016 /** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim 29:a3663151aa65 1017 * Set the BL pin (0 = Backlight Off, 1 = Backlight On).
wim 29:a3663151aa65 1018 */
wim 26:bd897a001012 1019 virtual void _setBL(bool value);
wim 29:a3663151aa65 1020
wim 29:a3663151aa65 1021 /** Implementation of pure Virtual Low level writes to LCD Bus (serial native)
wim 29:a3663151aa65 1022 * Set the databus value (4 bit).
wim 29:a3663151aa65 1023 */
wim 26:bd897a001012 1024 virtual void _setData(int value);
wim 29:a3663151aa65 1025
wim 29:a3663151aa65 1026 /** Low level writes to LCD serial bus only (serial native)
wim 29:a3663151aa65 1027 */
wim 26:bd897a001012 1028 virtual void _writeByte(int value);
wim 26:bd897a001012 1029
wim 26:bd897a001012 1030 //I2C bus
wim 26:bd897a001012 1031 I2C *_i2c;
wim 26:bd897a001012 1032 char _slaveAddress;
wim 26:bd897a001012 1033
wim 28:30fa94f7341c 1034 // controlbyte to select between data and command. Internal value for serial bus only
wim 28:30fa94f7341c 1035 char _controlbyte;
wim 28:30fa94f7341c 1036
wim 30:033048611c01 1037 //Backlight
wim 28:30fa94f7341c 1038 DigitalOut *_bl;
wim 26:bd897a001012 1039 };
wim 26:bd897a001012 1040
wim 26:bd897a001012 1041 //---------- End TextLCD_I2C_N ------------
wim 26:bd897a001012 1042
wim 26:bd897a001012 1043
simon 1:ac48b187213c 1044 #endif