File content as of revision 31:c84fc6d8eaa3:

TO DO!!!!!!

1) Add watchdog kicks to modem functions
2) USSDmessage index needs to work
3) clean up timeouts, do we hard code them or send as vars particlulary connectivity ones
4) check LNA power on GPS
5) improve gps fix quality logic
6) sometimes its setting back to srtate 0 and getting stuck in loop 
7) what happens if the setup fails, it should sleep for x hrs and then try again, need to check that and make its o
8) should we use 2g when possible
9) does 3g use less power
10) add model version details of board to the setup tx
11) add validation to each settings in 
12) temp sensor not working
13) make activity broadcast an option in normal lcoation one just total hours
14) does enabling handshaking and auto sleep on the modem save power
15) swap motion_g so that it is actually a mg value
16) test motion start stop times exactly
17) add extra 1cm to gsm antenna
18) errors while sending causes need to double send ussd command, adds on 5-10 seconds
19) check voltage calibation
21) when setup fails it does not go into dormant mode, could be ram retention
22) force CL locations to 6 decimal - needs to be done on web api



RESOLVED - TO BE TESTED AGAIN...
20) location accuracy 0 does not seem to work


TEST RESULTS:
CE3165 - ID 109

RUN 1.   GPS with 10 seconds fix hold, 2G priority, receipts everytime, 1m interval.
Starting battery 3.19v,  End battery 2.5v
Post time average (excluding reciept): 39 seconds
Post count: 3569 (last record id 5540)