Oxford CWM Team / Mbed 2 deprecated TFT_Mikroelectronika_IL9341_sketchpad

This is a simple program using the Mikroelectronika TFT resistive touchscreen to create a sketchpad application.

Dependencies:   SPI_TFT_ILI9341 TFT_fonts mbed

Fork of TFT_Mikroelectronika_IL9341 by Oxford CWM Team

You are viewing an older revision! See the latest version

Homepage

Table of Contents

  1. Code to make a simple sketchpad using the touchscreen from Mikroelectronika

Code to make a simple sketchpad using the touchscreen from Mikroelectronika

The Mikroelectronika touch screen is a good sized display we are using for the first time in 2016. It's got a touch panel layer and can be addressed by either SPI or parallel buses.

http://www.mikroe.com/add-on-boards/display/tft-proto/

/media/uploads/cstevens/sketchpad.jpg

Pin connections for use with an mbed Referring to the pin names on the screen pcb

  • Pins:
  • Screen mbed KL25Z example
  • ======================================
  • sdi mosi PTD2
  • sdo miso PTD3
  • rs sck PTD1
  • RD GND GND
  • IM0 GND GND
  • IM1 3.3V 3V3
  • IM2 3.3V 3V3
  • IM3 3.3V 3V3
  • CS digitalout pin PTD5
  • RST digitaloutpin PTD0
  • WR digitaloutpin PTA13

You will need 2 wires to drive the backlight on leda and ledk (anode and cathode) Link +3.3V to IM1, IM2, IM3 to setup spi communication mode link

All wikipages