Oxford CWM Team / Mbed 2 deprecated TFT_Mikroelectronika_IL9341_sketchpad

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Dependencies:   SPI_TFT_ILI9341 TFT_fonts mbed

Fork of TFT_Mikroelectronika_IL9341 by Oxford CWM Team

You are viewing an older revision! See the latest version

Homepage

Table of Contents

  1. Code to make a simple sketchpad using the touchscreen from Mikroelectronika

Code to make a simple sketchpad using the touchscreen from Mikroelectronika

The Mikroelectronika touch screen is a good sized display we are using for the first time in 2016. It's got a touch panel layer and can be addressed by either SPI or parallel buses.

http://www.mikroe.com/add-on-boards/display/tft-proto/

/media/uploads/cstevens/sketchpad.jpg

Pin connections for use with an mbed Referring to the pin names on the screen pcb

Pins: Screen mbed KL25Z example

sdi mosi PTD2 sdo miso PTD3 rs sck PTD1 RD GND GND IM0 GND GND IM1 3.3V 3V3 IM2 3.3V 3V3 IM3 3.3V 3V3 CS digitalout pin PTD5 RST digitaloutpin PTD0 DC digitaloutpin PTA13

You will need 2 wires to drive the backlight on leda and ledk (anode and cathode) Link +3.3V to IM1, IM2, IM3 to setup spi communication mode link

All wikipages