File content as of revision 5:9d5c7ee80f3b:

/**
 * Copyright 2015 Afero, Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "mbed.h"
#include "afLib.h"
#include "afErrors.h"
#include "msg_types.h"

#define IS_MCU_ATTR(x) (x >= 0 && x < 1024)

extern Timer t;

static iafLib *_iaflib = NULL;

#define MAX_SYNC_RETRIES    10
static long lastSync = 0;
static int syncRetries = 0;

/**
 * create
 *
 * The public constructor for the afLib. This allows us to create the afLib object once and hold a reference to it.
 */
iafLib *iafLib::create(PinName mcuInterrupt, isr isrWrapper,
        onAttributeSet attrSet, onAttributeSetComplete attrSetComplete, afSPI *theSPI)
{
    if (_iaflib == NULL) {
        _iaflib = new afLib( mcuInterrupt, isrWrapper, attrSet, attrSetComplete, theSPI);
    }

    return _iaflib;
}

void iafLib::destroy()
{
    afLib *p = (afLib*)_iaflib;
    delete p;
    _iaflib = NULL;
}
/**
 * afLib
 *
 * The private constructor for the afLib. This one actually initializes the afLib and prepares it for use.
 */
afLib::afLib(PinName mcuInterrupt, isr isrWrapper,
    onAttributeSet attrSet, onAttributeSetComplete attrSetComplete, afSPI *theSPI) : fco(mcuInterrupt)
{
    queueInit();
    _theSPI= theSPI;
    _request.p_value = NULL;

    //_spiSettings = SPISettings(1000000, LSBFIRST, SPI_MODE0);
    _interrupts_pending = 0;
    _state = STATE_IDLE;

    _writeCmd = NULL;
    _writeCmdOffset = 0;

    _outstandingSetGetAttrId = 0;

    _readCmd = NULL;
    _readCmdOffset = 0;
    _readBufferLen = 0;

    _txStatus = new StatusCommand();
    _rxStatus = new StatusCommand();

    _onAttrSet = attrSet;
    _onAttrSetComplete = attrSetComplete;
    _theSPI->begin();

    // AJS where does this get moved to??
    #ifdef ARDUINO
    pinMode(mcuInterrupt, INPUT);
    attachInterrupt(mcuInterrupt, isrWrapper, FALLING);
    #endif
    fco.fall(isrWrapper);
    SERIAL_PRINT_DBG_ASR("afLib init done!!\n");
}
//wsugi 20161128
afLib::~afLib()
{
    SERIAL_PRINT_DBG_ASR("deleted\n");
    if(_readBuffer != NULL)
    {
        delete[] (_readBuffer);
        _readBuffer = NULL;
    }
    
    if(_writeBuffer != NULL)
    {
        delete[] (_writeBuffer);
        _writeBuffer = NULL;
    }
    
    if(_readCmd != NULL)
    {
        delete (_readCmd);
        _readCmd = NULL;
    }
    
    if(_writeCmd != NULL)
    {
        delete (_writeCmd);
        _writeCmd = NULL;
    }
    
    if(_txStatus != NULL)
    {
        delete (_txStatus);
        _txStatus = NULL;
    }
    
    if(_rxStatus != NULL)
    {
        delete (_rxStatus);
        _rxStatus = NULL;
    }
    
    for (int i = 0; i < REQUEST_QUEUE_SIZE; i++)
    {
        if (_requestQueue[i].p_value != NULL)
        {
            delete[] (_requestQueue[i].p_value);
            _requestQueue[i].p_value = NULL;
        }
    }
    _iaflib = NULL;
}
//wsugi 20161128
/**
 * loop
 *
 * This is how the afLib gets time to run its state machine. This method should be called periodically from the
 * loop() function of the Arduino sketch.
 * This function pulls pending attribute operations from the queue. It takes approximately 4 calls to loop() to
 * complete one attribute operation.
 */
void afLib::loop(void) {
    if (isIdle() && (queueGet(&_request.messageType, &_request.requestId, &_request.attrId, &_request.valueLen,
                              &_request.p_value) == afSUCCESS)) {
        switch (_request.messageType) {
            case MSG_TYPE_GET:
                doGetAttribute(_request.requestId, _request.attrId);
                break;

            case MSG_TYPE_SET:
                doSetAttribute(_request.requestId, _request.attrId, _request.valueLen, _request.p_value);
                break;

            case MSG_TYPE_UPDATE:
                doUpdateAttribute(_request.requestId, _request.attrId, 0, _request.valueLen, _request.p_value);
                break;

            default:
                SERIAL_PRINT_DBG_ASR("%s\n","loop: request type!");
        }
    }

    if (_request.p_value != NULL) {
        delete[] (_request.p_value); //wsugi delete (_request.p_value);
        _request.p_value = NULL;
    }
    runStateMachine();
}

/**
 * updateIntsPending
 *
 * Interrupt-safe method for updating the interrupt count. This is called to increment and decrement the interrupt count
 * as interrupts are received and handled.
 */
void afLib::updateIntsPending(int amount) {
    fco.disable_irq();
    _interrupts_pending += amount;
    fco.enable_irq();
}

/**
 * sendCommand
 *
 * This increments the interrupt count to kick off the state machine in the next call to loop().
 */
void afLib::sendCommand(void) {
    fco.disable_irq();
    if (_interrupts_pending == 0 && _state == STATE_IDLE) {
        updateIntsPending(1);
    }
    fco.enable_irq();
}

/**
 * getAttribute
 *
 * The public getAttribute method. This method queues the operation and returns immediately. Applications must call
 * loop() for the operation to complete.
 */
int afLib::getAttribute(const uint16_t attrId) {
    _requestId++;
    uint8_t dummy; // This value isn't actually used.
    return queuePut(MSG_TYPE_GET, _requestId++, attrId, 0, &dummy);
}

/**
 * The many moods of setAttribute
 *
 * These are the public versions of the setAttribute method.
 * These methods queue the operation and return immediately. Applications must call loop() for the operation to complete.
 */
int afLib::setAttributeBool(const uint16_t attrId, const bool value) {
    _requestId++;
    uint8_t val = value ? 1 : 0;
    return queuePut(IS_MCU_ATTR(attrId) ? MSG_TYPE_UPDATE : MSG_TYPE_SET, _requestId, attrId, sizeof(val),
                    (uint8_t *)&val);
}

int afLib::setAttribute8(const uint16_t attrId, const int8_t value) {
    _requestId++;
    return queuePut(IS_MCU_ATTR(attrId) ? MSG_TYPE_UPDATE : MSG_TYPE_SET, _requestId, attrId, sizeof(value),
                    (uint8_t *)&value);
}

int afLib::setAttribute16(const uint16_t attrId, const int16_t value) {
    _requestId++;
    return queuePut(IS_MCU_ATTR(attrId) ? MSG_TYPE_UPDATE : MSG_TYPE_SET, _requestId, attrId, sizeof(value),
                    (uint8_t *) &value);
}

int afLib::setAttribute32(const uint16_t attrId, const int32_t value) {
    _requestId++;
    return queuePut(IS_MCU_ATTR(attrId) ? MSG_TYPE_UPDATE : MSG_TYPE_SET, _requestId, attrId, sizeof(value),
                    (uint8_t *) &value);
}

int afLib::setAttribute64(const uint16_t attrId, const int64_t value) {
    _requestId++;
    return queuePut(IS_MCU_ATTR(attrId) ? MSG_TYPE_UPDATE : MSG_TYPE_SET, _requestId, attrId, sizeof(value),
                    (uint8_t *) &value);
}

int afLib::setAttribute(const uint16_t attrId, const string &value) {
    _requestId++;
    return queuePut(IS_MCU_ATTR(attrId) ? MSG_TYPE_UPDATE : MSG_TYPE_SET, _requestId, attrId, value.length(),
                    (uint8_t *) value.c_str());
}

int afLib::setAttribute(const uint16_t attrId, const uint16_t valueLen, const char *value) {
    if (valueLen > MAX_ATTRIBUTE_SIZE) {
        return afERROR_INVALID_PARAM;
    }

    if (value == NULL) {
        return afERROR_INVALID_PARAM;
    }

    _requestId++;
    return queuePut(IS_MCU_ATTR(attrId) ? MSG_TYPE_UPDATE : MSG_TYPE_SET, _requestId, attrId, valueLen,
                    (const uint8_t *) value);
}

int afLib::setAttribute(const uint16_t attrId, const uint16_t valueLen, const uint8_t *value) {
    if (valueLen > MAX_ATTRIBUTE_SIZE) {
        return afERROR_INVALID_PARAM;
    }

    if (value == NULL) {
        return afERROR_INVALID_PARAM;
    }

    _requestId++;
    return queuePut(IS_MCU_ATTR(attrId) ? MSG_TYPE_UPDATE : MSG_TYPE_SET, _requestId, attrId, valueLen, value);
}

int afLib::setAttributeComplete(uint8_t requestId, const uint16_t attrId, const uint16_t valueLen, const uint8_t *value) {
    if (valueLen > MAX_ATTRIBUTE_SIZE) {
        return afERROR_INVALID_PARAM;
    }

    if (value == NULL) {
        return afERROR_INVALID_PARAM;
    }

    return queuePut(MSG_TYPE_UPDATE, requestId, attrId, valueLen, value);
}

/**
 * doGetAttribute
 *
 * The private version of getAttribute. This version actually calls sendCommand() to kick off the state machine and
 * execute the operation.
 */
int afLib::doGetAttribute(uint8_t requestId, uint16_t attrId) {
    if (_interrupts_pending > 0 || _writeCmd != NULL) {
        return afERROR_BUSY;
    }

    _writeCmd = new Command(requestId, MSG_TYPE_GET, attrId);
    if (!_writeCmd->isValid()) {
        SERIAL_PRINT_DBG_ASR("getAttribute invalid command:");
        _writeCmd->dumpBytes();
        _writeCmd->dump();
        delete (_writeCmd);
        _writeCmd = NULL;
        return afERROR_INVALID_COMMAND;
    }

    _outstandingSetGetAttrId = attrId;

    // Start the transmission.
    sendCommand();

    return afSUCCESS;
}

/**
 * doSetAttribute
 *
 * The private version of setAttribute. This version actually calls sendCommand() to kick off the state machine and
 * execute the operation.
 */
int afLib::doSetAttribute(uint8_t requestId, uint16_t attrId, uint16_t valueLen, uint8_t *value) {
    if (_interrupts_pending > 0 || _writeCmd != NULL) {
        return afERROR_BUSY;
    }
    _writeCmd = new Command(requestId, MSG_TYPE_SET, attrId, valueLen, value);
    if (!_writeCmd->isValid()) {
        SERIAL_PRINT_DBG_ASR("setAttributeComplete invalid command:");
        _writeCmd->dumpBytes();
        _writeCmd->dump();
        delete (_writeCmd);
        _writeCmd = NULL;
        return afERROR_INVALID_COMMAND;
    }

    _outstandingSetGetAttrId = attrId;

    // Start the transmission.
    sendCommand();

    return afSUCCESS;
}

/**
 * doUpdateAttribute
 *
 * setAttribute calls on MCU attributes turn into updateAttribute calls. See documentation on the SPI protocol for
 * more information. This method calls sendCommand() to kick off the state machine and execute the operation.
 */
int afLib::doUpdateAttribute(uint8_t requestId, uint16_t attrId, uint8_t status, uint16_t valueLen, uint8_t *value) {
    if (_interrupts_pending > 0 || _writeCmd != NULL) {
        return afERROR_BUSY;
    }

    _writeCmd = new Command(requestId, MSG_TYPE_UPDATE, attrId, status, 3 /* MCU Set it */, valueLen, value);
    if (!_writeCmd->isValid()) {
        SERIAL_PRINT_DBG_ASR("updateAttribute invalid command:");
        _writeCmd->dumpBytes();
        _writeCmd->dump();
        delete (_writeCmd);
        return afERROR_INVALID_COMMAND;
    }

    // Start the transmission.
    sendCommand();

    return afSUCCESS;
}

/**
 * parseCommand
 *
 * A debug method for parsing a string into a command. This is not required for library operation and is only supplied
 * as an example of how to execute attribute operations from a command line interface.
 */
#ifdef ATTRIBUTE_CLI
int afLib::parseCommand(const char *cmd) {
    if (_interrupts_pending > 0 || _writeCmd != NULL) {
        _theLog->print("Busy: ");
        _theLog->print(_interrupts_pending);
        _theLog->print(", ");
        _theLog->println(_writeCmd != NULL);
        return afERROR_BUSY;
    }

    int reqId = _requestId++;
    _writeCmd = new Command(_theLog,reqId, cmd);
    if (!_writeCmd->isValid()) {
        _theLog->print("BAD: ");
        _theLog->println(cmd);
        _writeCmd->dumpBytes();
        _writeCmd->dump();
        delete (_writeCmd);
        _writeCmd = NULL;
        return afERROR_INVALID_COMMAND;
    }

    // Start the transmission.
    sendCommand();

    return afSUCCESS;
}
#endif

/**
 * runStateMachine
 *
 * The state machine for afLib. This state machine is responsible for implementing the KSP SPI protocol and executing
 * attribute operations.
 * This method is run:
 *      1. In response to receiving an interrupt from the ASR-1.
 *      2. When an attribute operation is pulled out of the queue and executed.
 */
void afLib::runStateMachine(void) {
    if (_interrupts_pending > 0) {
        switch (_state) {
            case STATE_IDLE:
                onStateIdle();
                return;

            case STATE_STATUS_SYNC:
                onStateSync();
                break;

            case STATE_STATUS_ACK:
                onStateAck();
                break;

            case STATE_SEND_BYTES:
                onStateSendBytes();
                break;

            case STATE_RECV_BYTES:
                onStateRecvBytes();
                break;

            case STATE_CMD_COMPLETE:
                onStateCmdComplete();
                break;
        }

        updateIntsPending(-1);
    } else {
        if (syncRetries > 0 && syncRetries < MAX_SYNC_RETRIES && t.read_ms() - lastSync > 1000) {
            updateIntsPending(1);
        } else if (syncRetries >= MAX_SYNC_RETRIES) {
            SERIAL_PRINT_DBG_ASR("No response from ASR-1 - does profile have MCU enabled?\n");
            syncRetries = 0;
            _state = STATE_IDLE;
        }
    }
}

/**
 * onStateIdle
 *
 * If there is a command to be written, update the bytes to send. Otherwise we're sending a zero-sync message.
 * Either way advance the state to send a sync message.
 */
void afLib::onStateIdle(void) {
    if (_writeCmd != NULL) {
        // Include 2 bytes for length
        _bytesToSend = _writeCmd->getSize() + 2;
    } else {
        _bytesToSend = 0;
    }
    _state = STATE_STATUS_SYNC;
    printState(_state);
}

/**
 * onStateSync
 *
 * Write a sync message over SPI to let the ASR-1 know that we want to send some data.
 * Check for a "collision" which occurs if the ASR-1 is trying to send us data at the same time.
 */
void afLib::onStateSync(void) {
    int result;

    _txStatus->setAck(false);
    _txStatus->setBytesToSend(_bytesToSend);
    _txStatus->setBytesToRecv(0);

    result = exchangeStatus(_txStatus, _rxStatus);
    
    if (result == afSUCCESS && _rxStatus->isValid() && inSync(_txStatus, _rxStatus)) {
        syncRetries = 0;   // Flag that sync completed.
        _state = STATE_STATUS_ACK;
        if (_txStatus->getBytesToSend() == 0 && _rxStatus->getBytesToRecv() > 0) {
            _bytesToRecv = _rxStatus->getBytesToRecv();
        }
    } else {
        // Try resending the preamble
        _state = STATE_STATUS_SYNC;
        lastSync = t.read_ms();
        syncRetries++;
//          _txStatus->dumpBytes();
//          _rxStatus->dumpBytes();
    }
    printState(_state);
}

/**
 * onStateAck
 *
 * Acknowledge the previous sync message and advance the state.
 * If there are bytes to send, advance to send bytes state.
 * If there are bytes to receive, advance to receive bytes state.
 * Otherwise it was a zero-sync so advance to command complete.
 */
void afLib::onStateAck(void) {
    int result;

    _txStatus->setAck(true);
    _txStatus->setBytesToRecv(_rxStatus->getBytesToRecv());
    _bytesToRecv = _rxStatus->getBytesToRecv();
    result = writeStatus(_txStatus);
    if (result != afSUCCESS) {
        _state = STATE_STATUS_SYNC;
        printState(_state);
        return;
    }
    if (_bytesToSend > 0) {
        _writeBufferLen = (uint16_t) _writeCmd->getSize();
        _writeBuffer = new uint8_t[_bytesToSend];
        memcpy(_writeBuffer, (uint8_t * ) & _writeBufferLen, 2);
        _writeCmd->getBytes(&_writeBuffer[2]);
        _state = STATE_SEND_BYTES;
    } else if (_bytesToRecv > 0) {
        _state = STATE_RECV_BYTES;
    } else {
        _state = STATE_CMD_COMPLETE;
    }
    printState(_state);
}

/**
 * onStateSendBytes
 *
 * Send the required number of bytes to the ASR-1 and then advance to command complete.
 */
void afLib::onStateSendBytes(void) {
//        _theLog->print("send bytes: "); _theLog->println(_bytesToSend);
    sendBytes();

    if (_bytesToSend == 0) {
        _writeBufferLen = 0;
        delete[] (_writeBuffer); //wsugi delete (_writeBuffer);
        _writeBuffer = NULL;
        _state = STATE_CMD_COMPLETE;
        printState(_state);
    }
}

/**
 * onStateRecvBytes
 *
 * Receive the required number of bytes from the ASR-1 and then advance to command complete.
 */
void afLib::onStateRecvBytes(void) {
//        _theLog->print("receive bytes: "); _theLog->println(_bytesToRecv);
    recvBytes();
    if (_bytesToRecv == 0) {
        _state = STATE_CMD_COMPLETE;
        printState(_state);
        _readCmd = new Command(_readBufferLen, &_readBuffer[2]);
        delete[] (_readBuffer); //wsugi delete (_readBuffer);
        _readBuffer = NULL;
    }
}

/**
 * onStateCmdComplete
 *
 * Call the appropriate sketch callback to report the result of the command.
 * Clear the command object and go back to waiting for the next interrupt or command.
 */
void afLib::onStateCmdComplete(void) {
    _state = STATE_IDLE;
    printState(_state);
    if (_readCmd != NULL) {
        uint8_t *val = new uint8_t[_readCmd->getValueLen()];
        _readCmd->getValue(val);

        switch (_readCmd->getCommand()) {
            case MSG_TYPE_SET:
                _onAttrSet(_readCmd->getReqId(), _readCmd->getAttrId(), _readCmd->getValueLen(), val);
                break;

            case MSG_TYPE_UPDATE:
                if (_readCmd->getAttrId() == _outstandingSetGetAttrId) {
                    _outstandingSetGetAttrId = 0;
                }
                _onAttrSetComplete(_readCmd->getReqId(), _readCmd->getAttrId(), _readCmd->getValueLen(), val);
                break;

            default:
                break;
        }
        delete[] (val); //wsugi delete (val);
        delete (_readCmd);
        _readCmdOffset = 0;
        _readCmd = NULL;
    }

    if (_writeCmd != NULL) {
        // Fake a callback here for MCU attributes as we don't get one from the module.
        if (_writeCmd->getCommand() == MSG_TYPE_UPDATE && IS_MCU_ATTR(_writeCmd->getAttrId())) {
            _onAttrSetComplete(_writeCmd->getReqId(), _writeCmd->getAttrId(), _writeCmd->getValueLen(), _writeCmd->getValueP());
        }
        delete (_writeCmd);
        _writeCmdOffset = 0;
        _writeCmd = NULL;
    }
}

/**
 * exchangeStatus
 *
 * Write a status command object to the ASR-1 and clock in a status object from the ASR-1 at the same time.
 */
int afLib::exchangeStatus(StatusCommand *tx, StatusCommand *rx) {
    int result = afSUCCESS;
    uint16_t len = tx->getSize();
    int bytes[len];
    char rbytes[len+1];
    int index = 0;
    tx->getBytes(bytes);

//    _theSPI->beginSPI();

    for (int i=0;i<len;i++)
    {
      rbytes[i]=bytes[i];
    }
    rbytes[len]=tx->getChecksum();
    
    printTransaction((uint8_t*)rbytes,len+1);

    _theSPI->beginSPI();
    _theSPI->transfer(rbytes,len+1);
    _theSPI->endSPI();
    
    printTransaction((uint8_t*)rbytes,len+1);

    uint8_t cmd = bytes[index++];
    if (cmd != 0x30 && cmd != 0x31) {
        SERIAL_PRINT_DBG_ASR("exchangeStatus bad cmd: 0x%02x\n",cmd);
        result = afERROR_INVALID_COMMAND;
    }

    rx->setBytesToSend(rbytes[index + 0] | (rbytes[index + 1] << 8));
    rx->setBytesToRecv(rbytes[index + 2] | (rbytes[index + 3] << 8));
    rx->setChecksum(rbytes[index+4]);
    //_theSPI->endSPI();
    return result;
}

/**
 * inSync
 *
 * Check to make sure the Arduino and the ASR-1 aren't trying to send data at the same time.
 * Return true only if there is no collision.
 */
bool afLib::inSync(StatusCommand *tx, StatusCommand *rx) {
    return (tx->getBytesToSend() == 0 && rx->getBytesToRecv() == 0) ||
           (tx->getBytesToSend() > 0 && rx->getBytesToRecv() == 0) ||
           (tx->getBytesToSend() == 0 && rx->getBytesToRecv() > 0);
}

/**
 * writeStatus
 *
 * Write a status command to the ASR-1 and ignore the result. If you want to read bytes at the same time, use
 * exchangeStatus instead.
 */
int afLib::writeStatus(StatusCommand *c) {
    int result = afSUCCESS;
    uint16_t len = c->getSize();
    int bytes[len];
    char rbytes[len+1];
    int index = 0;
    c->getBytes(bytes);

    _theSPI->beginSPI();

    for (int i=0;i<len;i++)
    {
      rbytes[i]=bytes[i];
    }
    rbytes[len]=c->getChecksum();
    printTransaction((uint8_t*)rbytes,len+1);
    _theSPI->transfer(rbytes,len+1);
    printTransaction((uint8_t*)rbytes,len+1);
    uint8_t cmd = rbytes[index++];
    if (cmd != 0x30 && cmd != 0x31) {
        SERIAL_PRINT_DBG_ASR("writeStatus bad cmd: 0x%02x\n",cmd);
        result = afERROR_INVALID_COMMAND;
    }


    _theSPI->endSPI();

//  c->dump();
//  c->dumpBytes();

    return result;
}

/**
 * sendBytes
 *
 * Send the specified number of data bytes to the ASR-1. Do this in chunks of SPI_FRAME_LEN bytes.
 */
void afLib::sendBytes() {
    uint16_t len = _bytesToSend > SPI_FRAME_LEN ? SPI_FRAME_LEN : _bytesToSend;
    uint8_t bytes[SPI_FRAME_LEN];
    memset(bytes, 0xff, sizeof(bytes));

    memcpy(bytes, &_writeBuffer[_writeCmdOffset], len);

    _theSPI->beginSPI();
    printTransaction(bytes,len+1);
    _theSPI->transfer((char *)bytes,len);
    printTransaction(bytes,len+1);
    _theSPI->endSPI();

//  dumpBytes("Sending:", len, bytes);

    _writeCmdOffset += len;
    _bytesToSend -= len;
}

/**
 * recvBytes
 *
 * Receive the specified number of data bytes from the ASR-1. Do this in chunks of SPI_FRAME_LEN bytes.
 */
void afLib::recvBytes() {
    uint16_t len = _bytesToRecv > SPI_FRAME_LEN ? SPI_FRAME_LEN : _bytesToRecv;

    if (_readCmdOffset == 0) {
        _readBufferLen = _bytesToRecv;
        _readBuffer = new uint8_t[_readBufferLen];
    }

    _theSPI->beginSPI();


    char * start =(char*)_readBuffer + _readCmdOffset;
    printTransaction((uint8_t*)start,len+1);
    _theSPI->transfer(start,len);
    printTransaction((uint8_t*)start,len+1);

    _theSPI->endSPI();

//  dumpBytes("Receiving:", len, _readBuffer);

    _readCmdOffset += len;
    _bytesToRecv -= len;
}

/**
 * isIdle
 *
 * Provide a way for the sketch to know if we're idle. Returns true if there are no attribute operations in progress.
 */
bool afLib::isIdle() {
    return _interrupts_pending == 0 && _state == STATE_IDLE && _outstandingSetGetAttrId == 0;
}

/**
 * These methods are required to disable/enable interrupts for the Linux version of afLib.
 * They are no-ops on Arduino.
 */
#ifndef ARDUINO
void noInterrupts(){}
    void interrupts(){}
#endif

void afLib::mcuISR() {
//  _theLog->println("mcu");
    updateIntsPending(1);
}

/****************************************************************************
 *                              Queue Methods                               *
 ****************************************************************************/
/**
 * queueInit
 *
 * Create a small queue to prevent flooding the ASR-1 with attribute operations.
 * The initial size is small to allow running on small boards like UNO.
 * Size can be increased on larger boards.
 */
void afLib::queueInit() {
    for (int i = 0; i < REQUEST_QUEUE_SIZE; i++) {
        _requestQueue[i].p_value = NULL;
    }
}

/**
 * queuePut
 *
 * Add an item to the end of the queue. Return an error if we're out of space in the queue.
 */
int afLib::queuePut(uint8_t messageType, uint8_t requestId, const uint16_t attributeId, uint16_t valueLen,
                    const uint8_t *value) {
    for (int i = 0; i < REQUEST_QUEUE_SIZE; i++) {
        if (_requestQueue[i].p_value == NULL) {
            _requestQueue[i].messageType = messageType;
            _requestQueue[i].attrId = attributeId;
            _requestQueue[i].requestId = requestId;
            _requestQueue[i].valueLen = valueLen;
            _requestQueue[i].p_value = new uint8_t[valueLen];
            memcpy(_requestQueue[i].p_value, value, valueLen);
            return afSUCCESS;
        }
    }

    return afERROR_QUEUE_OVERFLOW;
}

/**
 * queueGet
 *
 * Pull and return the oldest item from the queue. Return an error if the queue is empty.
 */
int afLib::queueGet(uint8_t *messageType, uint8_t *requestId, uint16_t *attributeId, uint16_t *valueLen,
                    uint8_t **value) {
    for (int i = 0; i < REQUEST_QUEUE_SIZE; i++) {
        if (_requestQueue[i].p_value != NULL) {
            *messageType = _requestQueue[i].messageType;
            *attributeId = _requestQueue[i].attrId;
            *requestId = _requestQueue[i].requestId;
            *valueLen = _requestQueue[i].valueLen;
            *value = new uint8_t[*valueLen];
            memcpy(*value, _requestQueue[i].p_value, *valueLen);
            delete[] (_requestQueue[i].p_value); //wsugi delete (_requestQueue[i].p_value);
            _requestQueue[i].p_value = NULL;
            return afSUCCESS;
        }
    }

    return afERROR_QUEUE_UNDERFLOW;
}

/****************************************************************************
 *                              Debug Methods                               *
 ****************************************************************************/
/**
 * dumpBytes
 *
 * Dump a byte buffer to the debug log.
 */
void afLib::dumpBytes(char *label, int len, uint8_t *bytes) {
    SERIAL_PRINT_DBG_ASR("%s\n",label);
    for (int i = 0; i < len; i++) {
        if (i > 0) {
            SERIAL_PRINT_DBG_ASR(", ");
        }
        uint8_t b = bytes[i] & 0xff;

        if (b < 0x10) {
            SERIAL_PRINT_DBG_ASR("0x02x", b);
        } else {
            //_theLog->print("0x");
            SERIAL_PRINT_DBG_ASR("0x02x",b);//, HEX);
        }
    }
    SERIAL_PRINT_DBG_ASR("\n");
}

/**
 * printState
 *
 * Print the current state of the afLib state machine. For debugging, just remove the return statement.
 */
void afLib::printState(int state) {
//    return;
    switch (state) {
        case STATE_IDLE:
            SERIAL_PRINT_DBG_ASR("STATE_IDLE\n");
            break;
        case STATE_STATUS_SYNC:
            SERIAL_PRINT_DBG_ASR("STATE_STATUS_SYNC\n");
            break;
        case STATE_STATUS_ACK:
            SERIAL_PRINT_DBG_ASR("STATE_STATUS_ACK\n");
            break;
        case STATE_SEND_BYTES:
            SERIAL_PRINT_DBG_ASR("STATE_SEND_BYTES\n");
            break;
        case STATE_RECV_BYTES:
            SERIAL_PRINT_DBG_ASR("STATE_RECV_BYTES\n");
            break;
        case STATE_CMD_COMPLETE:
            SERIAL_PRINT_DBG_ASR("STATE_CMD_COMPLETE\n");
            break;
        default:
            SERIAL_PRINT_DBG_ASR("Unknown State!\n");
            break;
    }
}

void afLib::printTransaction(uint8_t *rbytes, int len)
{
    //return;
    int i = 0;
    for(;i<=len;++i)
    {
        SERIAL_PRINT_DBG_ASR("0x%02x:",rbytes[i]);
    }
    SERIAL_PRINT_DBG_ASR("\n");
}