Diff: TSL2561.h

Revision:

3:534235b99bc6

Parent:

2:17591031447b

--- a/TSL2561.h	Wed Aug 23 09:27:52 2017 +0000
+++ b/TSL2561.h	Mon Oct 02 12:47:09 2017 +0000
@@ -16,18 +16,18 @@
  *  http://www.adafruit.com/products/439
  *  http://akizukidenshi.com/catalog/g/gM-08219/
  */
-
+ 
 #ifndef TSL2561_H
 #define TSL2561_H
-
+ 
 #include "mbed.h"
-
+ 
 // Luminosity sensor, TSL2561
 // Address b7=0,b6=1,b5=1,b4=1,b3=0,b2=0,b1=1, b0=R/W
 #define TSL2561_ADDRESS_GND         (0x29 << 1)
 #define TSL2561_ADDRESS_FLOAT       (0x39 << 1)
 #define TSL2561_ADDRESS_VDD         (0x49 << 1)
-
+ 
 ////////////// Registers //////////////////////////////////
 // Register definition
 #define TSL2561_CONTROL             0x00
@@ -41,7 +41,7 @@
 #define TSL2561_DATA0HIGH           0x0D
 #define TSL2561_DATA1LOW            0x0E
 #define TSL2561_DATA1HIGH           0x0F
-
+ 
 ////////////// TIMING PARAMETER ///////////////////////////
 #define TIMING_GAIN_1               (0UL << 4)
 #define TIMING_GAIN_16              (1UL << 4)
@@ -50,11 +50,11 @@
 #define TIMING_TIME_402             (0x2)
 #define TIMING_TIME_MANU            (0x3)
 #define TIMING_DEFAULT              (TIMING_GAIN_1 + TIMING_TIME_402)
-
+ 
 ////////////// ID /////////////////////////////////////////
 #define I_AM_TSL2561                0x50
 #define REG_NO_MASK                 0x0F
-
+ 
 ////////////// COMMAND ////////////////////////////////////
 #define CMD_CMDMODE                 (1UL << 7)
 #define CMD_CLEAR                   (1UL << 6)
@@ -62,7 +62,7 @@
 #define CMD_BLOCK                   (1UL << 4)
 #define CMD_SINGLE                  (CMD_CMDMODE)
 #define CMD_MULTI                   (CMD_CMDMODE + CMD_WORD)
-
+ 
 /** Interface for Luminosity sensor, TSL2561
  * @code
  * #include "mbed.h"
@@ -83,7 +83,7 @@
  * }
  * @endcode
  */
-
+ 
 class TSL2561
 {
 public:
@@ -92,63 +92,63 @@
       */
     TSL2561(PinName p_sda, PinName p_scl);
     TSL2561(PinName p_sda, PinName p_scl, uint8_t addr);
-
+ 
     /** Configure data pin (with other devices on I2C line)
       * @param I2C previous definition
       */
     TSL2561(I2C& p_i2c);
     TSL2561(I2C& p_i2c, uint8_t addr);
-
+ 
     /** Get approximates the human eye response
       *  in the commonly used Illuminance unit of Lux
       * @param none
       * @return Lux
       */
     float lux(void);
-
+ 
     /** Set timing register
       * @param timing parameter
       * @return timing read data
       */
     uint8_t set_timing_reg(uint8_t parameter);
-
+ 
     /** Read timing register
       * @param timing parameter
       * @return timing read data
       */
     uint8_t read_timing_reg(void);
-
+ 
     /** Set I2C clock frequency
       * @param freq.
       * @return none
       */
     void frequency(int hz);
-
+ 
     /** check Device ID number
       * @param none
       * @return TSL2561 = 1, others  0
       */
     uint8_t who_am_i(void);
-
+ 
     /** Read ID and Revision Number
       * @param none
       * @return ID + REVNO
       */
     uint16_t read_ID(void);
-
+ 
     /** Power Up/Down
       * @param none
       * @return none
       */
     void power_up(void);
     void power_down(void);
-
+ 
 protected:
     I2C *_i2c_p;
     I2C &_i2c;
-
+ 
     void init(void);
-
+ 
 private:
     uint8_t  TSL2561_addr;
     uint8_t  dt[4];
@@ -158,5 +158,5 @@
     uint8_t  id_number;
     double   integ_time;
 };
-
-#endif      // TSL2561_H
+ 
+#endif      // TSL2561_H
\ No newline at end of file