Diff: main.cpp

Revision:

0:804d8b0fe9f3

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Mon Nov 16 16:56:34 2015 +0000
@@ -0,0 +1,138 @@
+/*
+#include "mbed.h"
+
+//------------------------------------
+// Hyperterminal configuration
+// 9600 bauds, 8-bit data, no parity
+//------------------------------------
+
+//Serial pc(SERIAL_TX, SERIAL_RX);
+
+Serial device(D8, D2);
+
+AnalogIn analog_value(A1);
+
+DigitalIn Sw(D3);
+
+BusOut ledSet1(D11, D10, D9, D4); //อย่าลืมกลับเลขด้วยเพราะมันต้องใช้ 7-Segment
+BusOut ledSet2(D15, D14, D13, D12); //อย่าลืมกลับเลขด้วยเพราะมันต้องใช้ 7-Segment
+
+
+
+int main()
+{
+
+    uint8_t state_menu=0;
+    //uint8_t state_show=0;
+    //uint8_t state_exit =0;
+    uint8_t data;
+    char value[3];
+    
+    ledSet1 = ledSet2 = 0;
+    device.printf("Hello Nucleo !\n");
+    while(1) {
+                
+        if(state_menu == 0) {
+            device.printf("Input Value Between 00-99 OR Select a To Read Analog Voltage. \n");
+            state_menu = 1;
+        }
+        if(device.readable()) {
+            value[0] = data = device.getc();
+            device.printf("\n");
+            state_menu=0;
+            
+            if(data == '0' || data == '1' || data == '2' || data == '3' || data == '4'|| data == '5' || data == '6' || data == '7'|| data == '8'|| data == '9' ){
+                //value[0] = data;
+                value[1] = device.getc();
+                    if(value[1] == '0' || value[1] == '1' || value[1] == '2' || value[1] == '3' || value[1] == '4'|| value[1] == '5' || value[1] == '6' || value[1] == '7'|| value[1] == '8'|| value[1] == '9' ){
+                        value[2]='\x0';  // add un 0 to end the c string
+                        device.printf("The Number is :: %s !\n",value);
+                        device.printf(" %d is desub.\n",atoi(value)/10);
+                        device.printf(" %d is Conveart.\n",atoi(value)%10);
+                        ledSet1 = atoi(value)/10;
+                        ledSet2 = atoi(value)%10;
+                    }    
+                    else
+                        device.printf("plz select Input No 00-99 or a\n\n\n");  
+                
+            }
+            else if(data == 'a'){
+                ledSet1 = ledSet2 = 0;
+                state_menu=0;
+                float value = analog_value.read(); // Converts and read the analog input value (value from 0.0 to 1.0)
+                value = (value * 3300)/1000; // Change the value to be in the 0 to 3300 range
+                device.printf("Status Voltage :: %.2f volte. \n",value);
+            }
+            else
+                device.printf("plz select Input No 00-99 or a\n\n\n"); 
+            
+        }
+    }         
+  }
+*/
+
+#include "mbed.h"
+
+//------------------------------------
+// Hyperterminal configuration
+// 9600 bauds, 8-bit data, no parity
+//------------------------------------
+
+//Serial device(SERIAL_TX, SERIAL_RX);
+
+Serial device(D8, D2);
+
+AnalogIn analog_value(A1);
+
+BusOut ledSet1(D11, D10, D9, D4); //อย่าลืมกลับเลขด้วยเพราะมันต้องใช้ 7-Segment
+BusOut ledSet2(D15, D14, D13, D12); //อย่าลืมกลับเลขด้วยเพราะมันต้องใช้ 7-Segment
+
+Timer t;
+
+int main()
+{
+
+    uint8_t state_menu=0;
+    char data[3]={"\x0"};
+    int i=0;
+
+    ledSet1 = ledSet2 = 0;
+    while(1) {
+        t.reset();
+        t.start();
+        i=0;
+        if(state_menu == 0) {
+            device.printf("Input Value Between 00-99 OR Select a To Read Analog Voltage. \n");
+            state_menu = 1;
+        }
+        while(i<2){
+            if(t.read_ms() < 1200){
+                if (device.readable()) {
+                    data[i] = device.getc();
+                    i++;
+                }
+            }
+            else 
+                break;
+        }
+        data[++i]='\0';  // add un 0 to end the c string
+        if(strlen(data)==0){
+            float value = analog_value.read(); // Converts and read the analog input value (value from 0.0 to 1.0)
+            value = (value * 3.3); // Change the value to be in the 0 to 3300 range
+            device.printf("Status Voltage :: %.2f volte. \n",value);
+        }
+        else if(( data[0] == '0' || data[0] == '1' || data[0] == '2' || data[0] == '3' || data[0] == '4'|| data[0] == '5' || data[0] == '6' || data[0] == '7'|| data[0] == '8'|| data[0] == '9' )
+                && (data[1] == '0' || data[1] == '1' || data[1] == '2' || data[1] == '3' || data[1] == '4'|| data[1] == '5' || data[1] == '6' || data[1] == '7'|| data[1] == '8'|| data[1] == '9' || data[1] == '\x0' )){
+            device.printf("The Number is :: %d !\n",atoi(data));
+            ledSet1 = atoi(data)/10;
+            ledSet2 = atoi(data)%10;    
+        }
+        else{
+            ledSet1 = ledSet2 = 0;
+            device.printf("Cannot is condition.\n\n\n");
+        }     
+        state_menu=0;
+        strcpy(data,"\x0");   
+    }
+  }
+