File content as of revision 1:c0f972361605:

/*********************************************************************
*                 SEGGER Software GmbH                               *
*        Solutions for real time microcontroller applications        *
**********************************************************************
*                                                                    *
*        (c) 1996 - 2018  SEGGER Microcontroller GmbH                *
*                                                                    *
*        Internet: www.segger.com    Support:  support@segger.com    *
*                                                                    *
**********************************************************************

** emWin V5.48 - Graphical user interface for embedded applications **
All  Intellectual Property rights in the Software belongs to  SEGGER.
emWin is protected by  international copyright laws.  Knowledge of the
source code may not be used to write a similar product. This file may
only be used in accordance with the following terms:

The  software has  been licensed by SEGGER Software GmbH to Nuvoton Technology Corporationat the address: No. 4, Creation Rd. III, Hsinchu Science Park, Taiwan
for the purposes  of  creating  libraries  for its 
Arm Cortex-M and  Arm9 32-bit microcontrollers, commercialized and distributed by Nuvoton Technology Corporation
under  the terms and conditions  of  an  End  User  
License  Agreement  supplied  with  the libraries.
Full source code is available at: www.segger.com

We appreciate your understanding and fairness.
----------------------------------------------------------------------
Licensing information
Licensor:                 SEGGER Software GmbH
Licensed to:              Nuvoton Technology Corporation, No. 4, Creation Rd. III, Hsinchu Science Park, 30077 Hsinchu City, Taiwan
Licensed SEGGER software: emWin
License number:           GUI-00735
License model:            emWin License Agreement, signed February 27, 2018
Licensed platform:        Cortex-M and ARM9 32-bit series microcontroller designed and manufactured by or for Nuvoton Technology Corporation
----------------------------------------------------------------------
Support and Update Agreement (SUA)
SUA period:               2018-03-26 - 2019-03-27
Contact to extend SUA:    sales@segger.com
----------------------------------------------------------------------
File        : GUI_X.C
Purpose     : Config / System dependent externals for GUI
---------------------------END-OF-HEADER------------------------------
*/

#include "GUI.h"

/*********************************************************************
*
*       Global data
*/
volatile GUI_TIMER_TIME OS_TimeMS;

/*********************************************************************
*
*      Timing:
*                 GUI_X_GetTime()
*                 GUI_X_Delay(int)

  Some timing dependent routines require a GetTime
  and delay function. Default time unit (tick), normally is
  1 ms.
*/

GUI_TIMER_TIME GUI_X_GetTime(void) { 
  return OS_TimeMS; 
}

void GUI_X_Delay(int ms) { 
  int tEnd = OS_TimeMS + ms;
  while ((tEnd - OS_TimeMS) > 0);
}

/*********************************************************************
*
*       GUI_X_Init()
*
* Note:
*     GUI_X_Init() is called from GUI_Init is a possibility to init
*     some hardware which needs to be up and running before the GUI.
*     If not required, leave this routine blank.
*/

void GUI_X_Init(void) {}


/*********************************************************************
*
*       GUI_X_ExecIdle
*
* Note:
*  Called if WM is in idle state
*/

void GUI_X_ExecIdle(void) {}

/*********************************************************************
*
*      Logging: OS dependent

Note:
  Logging is used in higher debug levels only. The typical target
  build does not use logging and does therefor not require any of
  the logging routines below. For a release build without logging
  the routines below may be eliminated to save some space.
  (If the linker is not function aware and eliminates unreferenced
  functions automatically)

*/

void GUI_X_Log     (const char *s) { GUI_USE_PARA(s); }
void GUI_X_Warn    (const char *s) { GUI_USE_PARA(s); }
void GUI_X_ErrorOut(const char *s) { GUI_USE_PARA(s); }

/*********************************************************************
*
*      Multitasking:
*
*                 GUI_X_InitOS()
*                 GUI_X_GetTaskId()
*                 GUI_X_Lock()
*                 GUI_X_Unlock()
*
* Note:
*   The following routines are required only if emWin is used in a
*   true multi task environment, which means you have more than one
*   thread using the emWin API.
*   In this case the
*                       #define GUI_OS 1
*  needs to be in GUIConf.h
*/

void GUI_X_InitOS(void)    {  }
void GUI_X_Unlock(void)    {  }
void GUI_X_Lock(void)      {  }
U32  GUI_X_GetTaskId(void) { return 1; }


/*********************************************************************
*
*      Event driving (optional with multitasking)
*
*                 GUI_X_WaitEvent()
*                 GUI_X_WaitEventTimed()
*                 GUI_X_SignalEvent()
*/

void GUI_X_WaitEvent(void)            {  }
void GUI_X_SignalEvent(void)          {  }
void GUI_X_WaitEventTimed(int Period) {  }

/*************************** End of file ****************************/