Nuvoton / Mbed OS NuMaker-mbed-cloud-example-Ethernet

Simple Mbed Cloud client application for NuMaker-PFM-M487 and NuMaker-PFM-NUC472 over Ethernet.

This application contains the example codes to:

1) Connect PFM-M487/PFM-NUC472 boards to Pelion

2) Enable Firmware update

For storage, PFM-M487/PFM-NUC472 support both SPI interface SD and built-in SD bus SD.

For connectivity, PFM-M487/PFM-NUC472 support Ethernet (on-board) by default.

This example supports Ethernet and built-in SD by default.

https://os.mbed.com/media/cache/platforms/NuMaker-PFM-M487.png.170x170_q85.png https://os.mbed.com/media/cache/platforms/NuMaker-PFM-NUC472Small.png.170x170_q85.png

mbed_app.json

Committer:
cyliang
Date:
2018-07-16
Revision:
2:9396e3065941
Parent:
0:83caa8fa1d2c
Child:
3:9e8abf07add2

File content as of revision 2:9396e3065941:

{
    "macros": [
        "MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\"",
        "PAL_USER_DEFINED_CONFIGURATION=\"sotp_fs_config_MbedOS.h\"",
        "MBED_CLIENT_USER_CONFIG_FILE=\"mbed_cloud_client_user_config.h\"",
        "MBED_CLOUD_CLIENT_USER_CONFIG_FILE=\"mbed_cloud_client_user_config.h\"",
        "PAL_DTLS_PEER_MIN_TIMEOUT=5000",
        "MBED_CONF_APP_MAIN_STACK_SIZE=5000",
        "ARM_UC_USE_PAL_BLOCKDEVICE=1",
        "PAL_INT_FLASH_NUM_SECTIONS=2",
        "MBED_CLOUD_CLIENT_UPDATE_STORAGE=ARM_UCP_FLASHIAP_BLOCKDEVICE"
    ],
    "target_overrides": {
        "*": {
            "platform.stdio-baud-rate": 115200,
            "platform.stdio-convert-newlines": true,
            "mbed-client.event-loop-size": 1024,
            "mbed-trace.enable": null,
            "update-client.storage-address"  : "(1024*1024*64)",
            "update-client.storage-size"     : "(1024*1024*2)",
            "update-client.storage-locations": "1"
        },
        "NUMAKER_PFM_NUC472": {
            "update-client.storage-address"     : "(1024*1024*800)",
            "update-client.storage-size"        : "(1024*1024*2)",
            "drivers.uart-serial-rxbuf-size"    : 1024,

            "target.macros_add": [
                "PAL_INT_FLASH_NUM_SECTIONS=2"
            ],
            "sotp-section-1-address"     : "0x7E000",
            "sotp-section-1-size"        : "0x1000",
            "sotp-section-2-address"     : "0x7F000",
            "sotp-section-2-size"        : "0x1000",
            "sd.SPI_MOSI": "PF_0",
            "sd.SPI_MISO": "PD_15",
            "sd.SPI_CLK":  "PD_14",
            "sd.SPI_CS":   "PD_13"
        },
        "NUMAKER_PFM_M487": {

            "update-client.storage-address"     : "(1024*1024*800)",
            "update-client.storage-size"        : "(1024*1024*2)",
            "drivers.uart-serial-rxbuf-size"    : 1024,

            "target.macros_add": [
                "PAL_INT_FLASH_NUM_SECTIONS=2"
            ],
            
            "sotp-section-1-address"     : "0x7E000",
            "sotp-section-1-size"        : "0x1000",
            "sotp-section-2-address"     : "0x7F000",
            "sotp-section-2-size"        : "0x1000",
            "sd.SPI_MOSI": "D11",
            "sd.SPI_MISO": "D12",
            "sd.SPI_CLK":  "D13",
            "sd.SPI_CS":   "D10"            
        }
    },
    "config": {
        "format-storage-layer-on-error": {
            "help": "Whether to format the storage layer when it cannot be read - always disable for production devices!",
            "value": 1
        },
        "network-interface": {
            "help": "Options are ETHERNET, WIFI_ESP8266",
            "value": "ETHERNET"
        },
        "wifi-ssid": {
            "help": "WiFi SSID",
            "value": "\"SSID\""
        },
        "wifi-password": {
            "help": "WiFi Password",
            "value": "\"Password\""
        },
        "wifi-tx": {
            "help": "TX pin for serial connection to external device",
            "value": "D1"
        },
        "wifi-rx": {
            "help": "RX pin for serial connection to external device",
            "value": "D0"
        },
        "developer-mode": {
            "help": "Enable Developer mode to skip Factory enrollment",
            "value": 1
        },
        "sotp-section-1-address": {
            "help": "Flash sector address for SOTP sector 1",
            "macro_name": "PAL_INTERNAL_FLASH_SECTION_1_ADDRESS",
            "value": null
        },
        "sotp-section-1-size": {
            "help": "Flash sector size for SOTP sector 1",
            "macro_name": "PAL_INTERNAL_FLASH_SECTION_1_SIZE",
            "value": null
        },
        "sotp-section-2-address": {
            "help": "Flash sector address for SOTP sector 2",
            "macro_name": "PAL_INTERNAL_FLASH_SECTION_2_ADDRESS",
            "value": null
        },
        "sotp-section-2-size": {
            "help": "Flash sector size for SOTP sector 2",
            "macro_name": "PAL_INTERNAL_FLASH_SECTION_2_SIZE",
            "value": null
        }
    }
}