Nuvoton
Simple Mbed Cloud client application for NuMaker-PFM-M487 and NuMaker-PFM-NUC472 over Ethernet.
This application contains the example codes to:
1) Connect PFM-M487/PFM-NUC472 boards to Pelion
2) Enable Firmware update
For storage, PFM-M487/PFM-NUC472 support both SPI interface SD and built-in SD bus SD.
For connectivity, PFM-M487/PFM-NUC472 support Ethernet (on-board) by default.
This example supports Ethernet and built-in SD by default.
Diff: mbed_app.json
- Revision:
- 0:83caa8fa1d2c
- Child:
- 2:9396e3065941
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed_app.json Fri Jul 06 04:15:24 2018 +0000
@@ -0,0 +1,111 @@
+{
+ "macros": [
+ "MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\"",
+ "PAL_USER_DEFINED_CONFIGURATION=\"sotp_fs_config_MbedOS.h\"",
+ "MBED_CLIENT_USER_CONFIG_FILE=\"mbed_cloud_client_user_config.h\"",
+ "MBED_CLOUD_CLIENT_USER_CONFIG_FILE=\"mbed_cloud_client_user_config.h\"",
+ "PAL_DTLS_PEER_MIN_TIMEOUT=5000",
+ "MBED_CONF_APP_MAIN_STACK_SIZE=5000",
+ "ARM_UC_USE_PAL_BLOCKDEVICE=1",
+ "PAL_INT_FLASH_NUM_SECTIONS=2",
+ "MBED_CLOUD_CLIENT_UPDATE_STORAGE=ARM_UCP_FLASHIAP_BLOCKDEVICE"
+ ],
+ "target_overrides": {
+ "*": {
+ "platform.stdio-baud-rate": 115200,
+ "platform.stdio-convert-newlines": true,
+ "mbed-client.event-loop-size": 1024,
+ "mbed-trace.enable": null,
+ "update-client.storage-address" : "(1024*1024*64)",
+ "update-client.storage-size" : "(1024*1024*2)",
+ "update-client.storage-locations": "1"
+ },
+ "NUMAKER_PFM_NUC472": {
+ "update-client.storage-address" : "(1024*1024*800)",
+ "update-client.storage-size" : "(1024*1024*2)",
+ "drivers.uart-serial-rxbuf-size" : 1024,
+
+ "target.macros_add": [
+ "PAL_INT_FLASH_NUM_SECTIONS=2"
+ ],
+ "network-interface": "WIFI_ESP8266",
+ "sotp-section-1-address" : "0x7E000",
+ "sotp-section-1-size" : "0x1000",
+ "sotp-section-2-address" : "0x7F000",
+ "sotp-section-2-size" : "0x1000",
+ "sd.SPI_MOSI": "PF_0",
+ "sd.SPI_MISO": "PD_15",
+ "sd.SPI_CLK": "PD_14",
+ "sd.SPI_CS": "PD_13"
+ },
+ "NUMAKER_PFM_M487": {
+
+ "update-client.storage-address" : "(1024*1024*800)",
+ "update-client.storage-size" : "(1024*1024*2)",
+ "drivers.uart-serial-rxbuf-size" : 1024,
+
+ "target.macros_add": [
+ "PAL_INT_FLASH_NUM_SECTIONS=2"
+ ],
+
+ "sotp-section-1-address" : "0x7E000",
+ "sotp-section-1-size" : "0x1000",
+ "sotp-section-2-address" : "0x7F000",
+ "sotp-section-2-size" : "0x1000",
+ "sd.SPI_MOSI": "D11",
+ "sd.SPI_MISO": "D12",
+ "sd.SPI_CLK": "D13",
+ "sd.SPI_CS": "D10"
+ }
+ },
+ "config": {
+ "format-storage-layer-on-error": {
+ "help": "Whether to format the storage layer when it cannot be read - always disable for production devices!",
+ "value": 1
+ },
+ "network-interface": {
+ "help": "Options are ETHERNET, WIFI_ESP8266",
+ "value": "ETHERNET"
+ },
+ "wifi-ssid": {
+ "help": "WiFi SSID",
+ "value": "\"SSID\""
+ },
+ "wifi-password": {
+ "help": "WiFi Password",
+ "value": "\"Password\""
+ },
+ "wifi-tx": {
+ "help": "TX pin for serial connection to external device",
+ "value": "D1"
+ },
+ "wifi-rx": {
+ "help": "RX pin for serial connection to external device",
+ "value": "D0"
+ },
+ "developer-mode": {
+ "help": "Enable Developer mode to skip Factory enrollment",
+ "value": 1
+ },
+ "sotp-section-1-address": {
+ "help": "Flash sector address for SOTP sector 1",
+ "macro_name": "PAL_INTERNAL_FLASH_SECTION_1_ADDRESS",
+ "value": null
+ },
+ "sotp-section-1-size": {
+ "help": "Flash sector size for SOTP sector 1",
+ "macro_name": "PAL_INTERNAL_FLASH_SECTION_1_SIZE",
+ "value": null
+ },
+ "sotp-section-2-address": {
+ "help": "Flash sector address for SOTP sector 2",
+ "macro_name": "PAL_INTERNAL_FLASH_SECTION_2_ADDRESS",
+ "value": null
+ },
+ "sotp-section-2-size": {
+ "help": "Flash sector size for SOTP sector 2",
+ "macro_name": "PAL_INTERNAL_FLASH_SECTION_2_SIZE",
+ "value": null
+ }
+ }
+}
\ No newline at end of file