Diff: targets/TARGET_NUVOTON/platform_entropy.cpp

Revision:

29:e890b0fdce53

Child:

33:c3a985807206

diff -r 4c196d0b769b -r e890b0fdce53 targets/TARGET_NUVOTON/platform_entropy.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_NUVOTON/platform_entropy.cpp	Tue Oct 29 10:59:34 2019 +0800
@@ -0,0 +1,363 @@
+/* 
+ * Copyright (c) 2019 Nuvoton Technology Corporation
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if !DEVICE_TRNG && !TARGET_PSA
+ 
+#include "mbed.h"
+#include "mbedtls/config.h"
+
+#if defined(MBEDTLS_ENTROPY_HARDWARE_ALT)
+
+/* Support entropy source with EADC seeded PRNG on non-PSA targets without TRNG
+ *
+ * Follow the steps below to replace TRNG with EADC seeded PRNG:
+ *
+ * 1. Seed PRNG with EADC band gap
+ * 2. Define MBEDTLS_ENTROPY_HARDWARE_ALT and provide custom mbedtls_hardware_poll(...)
+ *
+ * Reference configuration in mbed_app.json:
+ *
+ * For Pelion/mbedtls:
+ *
+ *  "target.macros_add": [
+ *      "MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS.h\"", 
+ *      "MBEDTLS_ENTROPY_HARDWARE_ALT"
+ *  ],
+ *
+ * For non-Pelion/mbedtls:
+ *
+ *  "target.macros_add": [
+ *      "MBEDTLS_ENTROPY_HARDWARE_ALT"
+ *  ],
+ *
+ * For both Pelion/non-Pelion (skip when done in targets.json):
+ *
+ *  "target.device_has_remove": ["TRNG"],
+ *
+ * WARNING: If the security level of EADC seeded PRNG cannot meet requirements, replace it with another entropy source.
+ */
+
+#include "crypto-misc.h"
+
+extern "C" {
+    int mbedtls_hardware_poll(void *data, unsigned char *output, size_t len, size_t *olen);
+}
+
+/* Support EADC band gap
+ *
+ * Mbed OS defines analog-in HAL for normal purposes, but EADC band gap is not defined.
+ * To avoid EADC code conflict and fit into existent analog-in HAL, we:
+ *
+ * 1. Hijack AnalogIn driver to involve analog-in HAL protection and EADC initialization.
+ *    This needs one dedicated EADC pin EADC_AUX_PINNAME.
+ * 2. Run EADC band gap conversion, with EADC module already initialized via above. This needs
+ *    one dedicated sample module and one dedicated channel.
+ */
+
+#if TARGET_NUC472
+    #define EADC_AUX_PINNAME        A0
+    #define EADC_BANDGAP_SMPLMOD    7
+    #define EADC_BANDGAP_CHN        8
+    #define PRNG_KEYSIZE_ID         PRNG_KEY_SIZE_128
+    #define PRNG_KEYSIZE            16
+#elif TARGET_M480
+    #define EADC_AUX_PINNAME        A0
+    #define EADC_BANDGAP_SMPLMOD    16
+    #define EADC_BANDGAP_CHN        16
+    #define PRNG_KEYSIZE_ID         PRNG_KEY_SIZE_128
+    #define PRNG_KEYSIZE            16
+#else
+    #error("Target not support")
+#endif
+
+class NuBandGap : public mbed::AnalogIn {
+public:
+    NuBandGap();
+    ~NuBandGap();
+
+    /* Generate bitstream based on EADC band gap 
+     *
+     * @returns 1/0 bitstream
+     */
+    uint16_t read_bitstream();
+};
+
+class NuEADCSeedPRNG : private mbed::NonCopyable<NuEADCSeedPRNG>
+{
+public:
+    NuEADCSeedPRNG();
+    ~NuEADCSeedPRNG();
+
+    /* Get random data
+     *
+     * @param output    The pointer to an output array
+     * @param len       The size of output data, to avoid buffer overwrite
+     * @param olen      The length of generated data
+     */
+    int get_bytes(unsigned char *output, size_t len, size_t *olen);
+
+private:
+    NuBandGap band_gap;
+};
+
+int mbedtls_hardware_poll(MBED_UNUSED void *data, unsigned char *output, size_t len, size_t *olen)
+{
+    static NuEADCSeedPRNG eadc_seed_prng;
+
+    return eadc_seed_prng.get_bytes(output, len, olen);
+}
+
+NuBandGap::NuBandGap() : mbed::AnalogIn(EADC_AUX_PINNAME)
+{
+    EADC_T *eadc_base = (EADC_T *) EADC_BASE;
+
+    EADC_ConfigSampleModule(eadc_base, EADC_BANDGAP_SMPLMOD, EADC_SOFTWARE_TRIGGER, EADC_BANDGAP_CHN);
+}
+
+NuBandGap::~NuBandGap()
+{
+}
+
+uint16_t NuBandGap::read_bitstream()
+{
+    uint16_t one_or_zero;
+
+    lock();
+
+    EADC_T *eadc_base = (EADC_T *) EADC_BASE;
+
+    EADC_START_CONV(eadc_base, 1 << EADC_BANDGAP_SMPLMOD);
+    while (EADC_GET_DATA_VALID_FLAG(eadc_base, 1 << EADC_BANDGAP_SMPLMOD) != (1 << EADC_BANDGAP_SMPLMOD));
+    uint16_t conv_res_12 = EADC_GET_CONV_DATA(eadc_base, EADC_BANDGAP_SMPLMOD);
+
+    /* 1 as number of 'one' is odd; 0 otherwise */
+    unsigned i;
+    uint16_t count_one = 0;
+    for (i = 0; i < 12; i ++) {
+        if (conv_res_12 & 1) {
+            count_one ++;
+        }
+        conv_res_12 >>= 1;
+    }
+    one_or_zero = count_one & 1;
+
+    unlock();
+    
+    return one_or_zero;
+}
+
+NuEADCSeedPRNG::NuEADCSeedPRNG()
+{
+    crypto_init();
+    PRNG_ENABLE_INT();
+
+    uint32_t seed = 0;
+    unsigned i = 32;
+
+    /* Get seed from EADC band gap */
+    while (i --) {
+        seed <<= 1;
+        seed |= band_gap.read_bitstream();
+    }
+
+    /* PRNG reload seed */
+    PRNG_Open(PRNG_KEYSIZE_ID, 1, seed);
+}
+
+NuEADCSeedPRNG::~NuEADCSeedPRNG()
+{
+    PRNG_DISABLE_INT();
+    crypto_uninit();
+}
+
+int NuEADCSeedPRNG::get_bytes(unsigned char *output, size_t len, size_t *olen)
+{
+    /* Check argument validity */
+    if (!output && len) {
+        return -1;
+    }
+
+    unsigned char *output_ind = output;
+    size_t rmn = len;
+    uint32_t rand_data[PRNG_KEYSIZE / sizeof(uint32_t)];
+    while (rmn) {
+        crypto_prng_prestart();
+        PRNG_Start();
+        crypto_prng_wait();
+
+        PRNG_Read(rand_data);
+
+        size_t n = (rmn >= PRNG_KEYSIZE) ? PRNG_KEYSIZE : rmn;
+        memcpy(output_ind, rand_data, n);
+        
+        output_ind += n;
+        rmn -= n;
+    }
+
+    if (olen) {
+        *olen = len;
+    }
+
+    return 0;
+}
+
+#else
+
+/* Support entropy source with mbedtls NV seed on non-PSA targets without TRNG
+ *
+ * Follow the steps below to replace TRNG with mbedtls NV seed:
+ *
+ * 1. Define MBEDTLS_ENTROPY_NV_SEED
+ * 2. Define MBEDTLS_PLATFORM_NV_SEED_READ_MACRO/MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO and provide custom mbedtls_nv_seed_read(...)/mbedtls_nv_seed_write(...).
+ * 3. Don't define MBEDTLS_PSA_INJECT_ENTROPY. Meet mbedtls_psa_inject_entropy(...) undefined and then provide custom one, which must be compatible with mbedtls_nv_seed_read(...)/mbedtls_nv_seed_write(...) above.
+ * 4. For development, simulating partial provision process, inject entropy seed via mbedtls_psa_inject_entropy(...) pre-main.
+ *
+ * Reference configuration in mbed_app.json:
+ *
+ * For Pelion/mbedtls, don't define MBEDTLS_ENTROPY_NV_SEED because it has defined in:
+ * https://github.com/ARMmbed/mbed-cloud-client/blob/master/mbed-client-pal/Configs/mbedTLS/mbedTLSConfig_mbedOS_SW_TRNG.h
+ * 
+ *  "target.macros_add": [
+ *      "MBEDTLS_USER_CONFIG_FILE=\"mbedTLSConfig_mbedOS_SW_TRNG.h\"", 
+ *      "PAL_USE_HW_TRNG=0",
+ *      "MBEDTLS_PLATFORM_NV_SEED_READ_MACRO=mbedtls_platform_seed_read",
+ *      "MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO=mbedtls_platform_seed_write"
+ *  ],
+ *
+ * For non-Pelion/mbedtls:
+ *
+ *  "target.macros_add": [
+ *      "MBEDTLS_ENTROPY_NV_SEED",
+ *      "MBEDTLS_PLATFORM_NV_SEED_READ_MACRO=mbedtls_platform_seed_read",
+ *      "MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO=mbedtls_platform_seed_write"
+ *  ],
+ *
+ * For both Pelion/non-Pelion (skip when done in targets.json):
+ *
+ *  "target.device_has_remove": ["TRNG"],
+ *
+ * WARNING: The injection of mbedtls NV seed pre-main is only for development. Run provision process for mass production.
+ */
+
+#include "entropy_poll.h"
+#include "psa/crypto.h"
+#include "KVStore.h"
+#include "TDBStore.h"
+#include "KVMap.h"
+#include "kv_config.h"
+
+extern "C" {
+    psa_status_t mbedtls_psa_inject_entropy(const uint8_t *seed, size_t seed_size);
+    int mbedtls_platform_seed_read(unsigned char *buf, size_t buf_len);
+    int mbedtls_platform_seed_write(unsigned char *buf, size_t buf_len);
+}
+
+/* Requirement of seed size
+ *
+ * 1. >= MBEDTLS_ENTROPY_MIN_PLATFORM
+ * 2. >= MBEDTLS_ENTROPY_BLOCK_SIZE
+ * 3. <= MBEDTLS_ENTROPY_MAX_SEED_SIZE
+ */
+#define SEED_SIZE       64
+MBED_STATIC_ASSERT(SEED_SIZE >= MBEDTLS_ENTROPY_MIN_PLATFORM, "Seed size must be larger than or equal to MBEDTLS_ENTROPY_MIN_PLATFORM");
+MBED_STATIC_ASSERT(SEED_SIZE >= MBEDTLS_ENTROPY_BLOCK_SIZE, "Seed size must be larger than or equal to MBEDTLS_ENTROPY_BLOCK_SIZE");
+MBED_STATIC_ASSERT(SEED_SIZE <= MBEDTLS_ENTROPY_MAX_SEED_SIZE, "Seed size must be smaller than or equal to MBEDTLS_ENTROPY_MAX_SEED_SIZE");
+
+/* Seed key name in kvstore */
+#define KV_KEY_SEED         "seed"
+
+/* Inject an initial entropy seed for the random generator into secure storage
+ *
+ * See reference below for its prototype: 
+ * https://github.com/ARMmbed/mbed-os/blob/master/features/mbedtls/mbed-crypto/inc/psa/crypto_extra.h
+ */
+psa_status_t mbedtls_psa_inject_entropy(const uint8_t *seed, size_t seed_size)
+{
+    /* Check seed size requirement */
+    if ((( seed_size < MBEDTLS_ENTROPY_MIN_PLATFORM) || (seed_size < MBEDTLS_ENTROPY_BLOCK_SIZE)) ||
+        (seed_size > MBEDTLS_ENTROPY_MAX_SEED_SIZE)) {
+            return PSA_ERROR_INVALID_ARGUMENT;
+    }
+
+    /* Get kvstore internal storage where seed is injected */
+    KVMap &kv_map = KVMap::get_instance();
+    KVStore *inner_store = kv_map.get_internal_kv_instance(NULL);
+    if (inner_store == NULL) {
+        return PSA_ERROR_STORAGE_FAILURE;
+    }
+
+    /* Check if seed has injected */
+    KVStore::info_t kv_info;
+    int kv_status = inner_store->get_info(KV_KEY_SEED, &kv_info);
+    if (kv_status == MBED_SUCCESS) {
+        return PSA_ERROR_NOT_PERMITTED;
+    } else if (kv_status == MBED_ERROR_ITEM_NOT_FOUND) {
+        /* No seed injected, inject it below */
+    } else {
+        return PSA_ERROR_STORAGE_FAILURE;
+    }
+
+    /* Inject seed into kvstore internal storage */
+    kv_status = inner_store->set(KV_KEY_SEED, seed, seed_size, 0);
+    if (kv_status == MBED_SUCCESS) {
+        return PSA_SUCCESS;
+    } else {
+        return PSA_ERROR_STORAGE_FAILURE;
+    }
+}
+
+int mbedtls_platform_seed_read(unsigned char *buf, size_t buf_len)
+{
+    /* Get kvstore internal storage where seed is injected */
+    KVMap &kv_map = KVMap::get_instance();
+    KVStore *inner_store = kv_map.get_internal_kv_instance(NULL);
+    if (inner_store == NULL) {
+        return -1;
+    }
+
+    /* Read seed from kvstore internal storage */
+    size_t actual_size = 0;
+    int kv_status = inner_store->get(KV_KEY_SEED, buf, buf_len, &actual_size, 0);
+    if (kv_status != MBED_SUCCESS || actual_size != buf_len) {
+        return -1;
+    } else {
+        return buf_len;
+    }
+}
+
+int mbedtls_platform_seed_write(unsigned char *buf, size_t buf_len)
+{
+    /* Get kvstore internal storage where seed is injected */
+    KVMap &kv_map = KVMap::get_instance();
+    KVStore *inner_store = kv_map.get_internal_kv_instance(NULL);
+    if (inner_store == NULL) {
+        return -1;
+    }
+
+    /* Write seed into kvstore internal storage */
+    int kv_status = inner_store->set(KV_KEY_SEED, buf, buf_len, 0);
+    if (kv_status != MBED_SUCCESS) {
+        return -1;
+    } else {
+        return buf_len;
+    }
+}
+
+#endif /* #if defined(MBEDTLS_ENTROPY_HARDWARE_ALT) */
+
+#endif /* !DEVICE_TRNG && !TARGET_PSA */