Getting Started Guide¶

• Set the JP5 jumper to E5V on the Nucleo
• Place the Skywire Shield onto the Nucleo as pictured
• Place the Skywire modem onto the Shield as picture and attach the antenna U.FL coax cable as pictured
• Plug the 12V wall supply into the Skywire Shield

• Go to https://freeboard.io/ and create a user account
• Once you are logged into your Freeboard account, go to https://freeboard.io/board/LhnbrX and clone the dashboard by clicking the CLONE link in the lower right corner
  • Old Revision of dashboard is here [[https://freeboard.io/board/jqlneI}}

• The new dashboard will show up on you account list under My Freeboards, you can then edit the name to whatever you like

• Under the Datasources tab on the dashboard, click the skywire link

• Change the THING NAME field to a unique string, we recommended using the MEID on the Skywire Modem, but it could be anything you want.

• Next Import the Skywire_Demo program into the online compiler
• Open main.cpp and go to Line 26, change the DeviceID to the THING NAME you entered into your Freeboard

/* --CHANGE THIS FOR YOUR SETUP" -- */
#define DeviceID "DweetIODeviceName"  //Freeboard DweetIO unique ID

• Compile and upload to the Nucleo, cycle power to the shield and the sensor data should start to upload to your new Freeboard.