Demo using a Nimbelink Skywire cellular modem paired with ST Nucleo. This demo reads several sensors and reports them to a Freeboard dashboard using dweet.io from Buglabs
Dependencies: LIS3DH LM75B LPS331 hts221 mbed
Fork of Skywire_Demo by
Getting Started Guide
- Set the JP5 jumper to E5V on the Nucleo
- Place the Skywire Shield onto the Nucleo as pictured
- Place the Skywire modem onto the Shield as picture and attach the antenna U.FL coax cable as pictured
- Plug the 12V wall supply into the Skywire Shield
- Go to https://freeboard.io/ and create a user account
- Once you are logged into your Freeboard account, go to https://freeboard.io/board/PJI272 and clone the dashboard by clicking the CLONE link in the lower right corner
- Old Revision of dashboard is here https://freeboard.io/board/jqlneI
- The new dashboard will show up on you account list under My Freeboards, you can then edit the name to whatever you like
- Under the Datasources tab on the dashboard, click the skywire link
- Change the THING NAME field to a unique string, we recommended using the MEID or IMEI on the Skywire Modem, but it could be anything you want.
- Next, Import the Skywire_Demo program into the online compiler
- Open main.cpp. Starting at Line 58, there is a list of Skywire Modems. Uncomment the Skywire Modem that you are using. Make sure only one Skywire Modem is uncommented:
main.cpp
/* * DEFINE THE SKYWIRE MODEM * Uncomment only the modem that you are using. * Make sure only one modem is uncommented! */ //#define NL_SW_1xRTT_V // Verizon 2G Modem - CE910-DUAL //#define NL_SW_1xRTT_S // Sprint 2G Modem - CE910-DUAL //#define NL_SW_1xRTT_A // Aeris 2G Modem - CE910-DUAL //#define NL_SW_GPRS // AT&T/T-Mobile 2G Modem //#define NL_SW_EVDO_V // Verizon 3G Modem //#define NL_SW_EVDO_A // Aeris 3G Modem //#define NL_SW_HSPAP // AT&T/T-Mobile 3G Modem //#define NL_SW_HSPAPG // AT&T/T-Mobile 3G Modem w/ GPS //#define NL_SW_HSPAPE // GSM 3G Modem, EU //#define NL_SW_LTE_TSVG // Verizon 4G LTE Modem //#define NL_SW_LTE_TNAG // AT&T/T-Mobile 4G LTE Modem //#define NL_SW_LTE_TEUG // GSM 4G LTE Modem, EU //#define NL_SW_LTE_GELS3 // VZW LTE Cat 1 Modem
- Next, to Line 73 in main.cpp, and change the DeviceID to the THING NAME you entered into your Freeboard:
main.cpp
/* --CHANGE THIS FOR YOUR SETUP" -- */ #define DeviceID "DweetIODeviceName" //Freeboard DweetIO unique ID
- If applicable, go to Line 77 in main.cpp and change the APN to your specific APN:
main.cpp
/* --CHANGE THIS FOR YORU SETUP (IF APPLICABLE)-- */ #if defined NL_SW_HSPAP || defined NL_SW_HSPAPG || defined NL_SW_HSPAPE || defined NL_SW_LTE_TSVG || defined NL_SW_LTE_TNAG || defined NL_SW_LTE_TEUG || defined NL_SW_LTE_GELS3 std::string APN = "yourAPNhere"; #endif
- Compile and upload to the Nucleo, cycle power to the shield and the sensor data should start to upload to your new Freeboard.
main.cpp@2:b57e24a42b6f, 2015-01-12 (annotated)
- Committer:
- kholland
- Date:
- Mon Jan 12 17:43:04 2015 +0000
- Revision:
- 2:b57e24a42b6f
- Parent:
- 0:3095958bc639
- Child:
- 3:4b2176f6474c
Modified for CE910
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
kholland | 0:3095958bc639 | 1 | |
kholland | 0:3095958bc639 | 2 | |
kholland | 0:3095958bc639 | 3 | #include "mbed.h" |
kholland | 0:3095958bc639 | 4 | #include "LPS331.h" |
kholland | 0:3095958bc639 | 5 | #include "LIS3DH.h" |
kholland | 0:3095958bc639 | 6 | #include "LM75B.h" |
kholland | 0:3095958bc639 | 7 | |
kholland | 0:3095958bc639 | 8 | /* --CHANGE THIS FOR YOUR SETUP" -- */ |
kholland | 0:3095958bc639 | 9 | #define DeviceID "mbedskywire" //Freeboard DweetIO unique ID |
kholland | 0:3095958bc639 | 10 | |
kholland | 0:3095958bc639 | 11 | DigitalOut myled(LED1); |
kholland | 0:3095958bc639 | 12 | DigitalOut skywire_en(PA_6); |
kholland | 0:3095958bc639 | 13 | DigitalOut skywire_rts(PA_7); |
kholland | 0:3095958bc639 | 14 | |
kholland | 0:3095958bc639 | 15 | Serial skywire(PA_9,PA_10); |
kholland | 0:3095958bc639 | 16 | Serial debug_pc(USBTX, USBRX); |
kholland | 0:3095958bc639 | 17 | |
kholland | 0:3095958bc639 | 18 | I2C i2c(PB_9,PB_8); |
kholland | 0:3095958bc639 | 19 | char msg[3]; |
kholland | 0:3095958bc639 | 20 | |
kholland | 0:3095958bc639 | 21 | LPS331 pressure(i2c); |
kholland | 0:3095958bc639 | 22 | LM75B LM75_temp(PB_9,PB_8); |
kholland | 0:3095958bc639 | 23 | LIS3DH accel(i2c, LIS3DH_V_CHIP_ADDR, LIS3DH_DR_NR_LP_100HZ, LIS3DH_FS_2G); |
kholland | 0:3095958bc639 | 24 | |
kholland | 0:3095958bc639 | 25 | |
kholland | 0:3095958bc639 | 26 | char str[512]; |
kholland | 0:3095958bc639 | 27 | char str2[512]; |
kholland | 0:3095958bc639 | 28 | float latitude; |
kholland | 0:3095958bc639 | 29 | float longitude; |
kholland | 0:3095958bc639 | 30 | int number; |
kholland | 0:3095958bc639 | 31 | |
kholland | 0:3095958bc639 | 32 | int main() |
kholland | 0:3095958bc639 | 33 | { |
kholland | 0:3095958bc639 | 34 | float axis[3]; |
kholland | 0:3095958bc639 | 35 | float press; |
kholland | 0:3095958bc639 | 36 | float temp; |
kholland | 0:3095958bc639 | 37 | |
kholland | 0:3095958bc639 | 38 | |
kholland | 0:3095958bc639 | 39 | debug_pc.baud(115200); |
kholland | 0:3095958bc639 | 40 | skywire.baud(115200); |
kholland | 0:3095958bc639 | 41 | skywire_rts=0; |
kholland | 0:3095958bc639 | 42 | myled=0; |
kholland | 0:3095958bc639 | 43 | debug_pc.printf("Starting Demo...\n"); |
kholland | 0:3095958bc639 | 44 | debug_pc.printf("Waiting for Skywire to Boot...\n"); |
kholland | 0:3095958bc639 | 45 | //Enable Skywire |
kholland | 0:3095958bc639 | 46 | skywire_en=0; |
kholland | 0:3095958bc639 | 47 | wait(2); |
kholland | 0:3095958bc639 | 48 | skywire_en=1; |
kholland | 0:3095958bc639 | 49 | wait(2); |
kholland | 0:3095958bc639 | 50 | skywire_en=0; |
kholland | 0:3095958bc639 | 51 | |
kholland | 0:3095958bc639 | 52 | myled=1; |
kholland | 0:3095958bc639 | 53 | wait(5); |
kholland | 0:3095958bc639 | 54 | |
kholland | 0:3095958bc639 | 55 | LM75_temp.open(); |
kholland | 0:3095958bc639 | 56 | |
kholland | 0:3095958bc639 | 57 | debug_pc.printf("Connecting to Network...\n"); |
kholland | 0:3095958bc639 | 58 | // get IP address |
kholland | 0:3095958bc639 | 59 | skywire.printf("AT#SGACT=1,1\r\n"); |
kholland | 0:3095958bc639 | 60 | wait_ms(500); |
kholland | 0:3095958bc639 | 61 | skywire.gets(str, 255); |
kholland | 0:3095958bc639 | 62 | skywire.gets(str, 255); |
kholland | 0:3095958bc639 | 63 | debug_pc.printf("Skywire says: %s\n", str); |
kholland | 0:3095958bc639 | 64 | |
kholland | 0:3095958bc639 | 65 | // connect to dweet.io |
kholland | 0:3095958bc639 | 66 | skywire.printf("AT#HTTPCFG=1,\"dweet.io\",80,0\r\n"); |
kholland | 0:3095958bc639 | 67 | skywire.gets(str, 255); |
kholland | 0:3095958bc639 | 68 | skywire.gets(str, 255); |
kholland | 0:3095958bc639 | 69 | debug_pc.printf("Skywire says: %s\n", str); |
kholland | 0:3095958bc639 | 70 | |
kholland | 0:3095958bc639 | 71 | //get location approximation from cell tower information |
kholland | 0:3095958bc639 | 72 | skywire.printf("AT#AGPSSND\r\n"); |
kholland | 0:3095958bc639 | 73 | skywire.gets(str, 255); |
kholland | 0:3095958bc639 | 74 | skywire.gets(str, 255); |
kholland | 2:b57e24a42b6f | 75 | //skywire.gets(str, 255); |
kholland | 2:b57e24a42b6f | 76 | //skywire.gets(str, 255); |
kholland | 0:3095958bc639 | 77 | debug_pc.printf("Skywire says: %s\n", str); |
kholland | 0:3095958bc639 | 78 | sscanf(str, "%s %d,%f,%f,", str2, &number, &latitude, &longitude); |
kholland | 0:3095958bc639 | 79 | debug_pc.printf("Location: Latt:%f, Long:%f\n", latitude, longitude); |
kholland | 0:3095958bc639 | 80 | |
kholland | 0:3095958bc639 | 81 | while(1) { |
kholland | 0:3095958bc639 | 82 | temp = (float)LM75_temp; |
kholland | 0:3095958bc639 | 83 | debug_pc.printf("Temp = %.3f\n", temp); |
kholland | 0:3095958bc639 | 84 | press=(float)pressure.value() / 4096; |
kholland | 0:3095958bc639 | 85 | debug_pc.printf("Pressure = %.3f\n", press); |
kholland | 0:3095958bc639 | 86 | accel.read_data(axis); |
kholland | 0:3095958bc639 | 87 | debug_pc.printf("Accel = %.3f, %.3f, %.3f\n", axis[0], axis[1], axis[2]); |
kholland | 0:3095958bc639 | 88 | |
kholland | 0:3095958bc639 | 89 | //Report Sensor Data to dweet.io |
kholland | 0:3095958bc639 | 90 | skywire.printf("AT#HTTPQRY=1,0,\"/dweet/for/%s?temperature=%.3f&pressure=%.3f&X=%.3f&Y=%.3f&Z=%.3f&Latitude=%f&Longitude=%f\"\r\n", DeviceID, temp, press, axis[0], axis[1], axis[2], latitude, longitude); |
kholland | 2:b57e24a42b6f | 91 | skywire.gets(str, 255); |
kholland | 0:3095958bc639 | 92 | skywire.printf("AT#HTTPRCV=1\r\n"); |
kholland | 2:b57e24a42b6f | 93 | skywire.gets(str, 255); |
kholland | 0:3095958bc639 | 94 | wait(5); |
kholland | 0:3095958bc639 | 95 | } |
kholland | 0:3095958bc639 | 96 | |
kholland | 0:3095958bc639 | 97 | } |