Base class for IP Based Networking Libraries
Dependencies: DnsQuery
Dependents: TempTower BSDInterfaceTests HelloBSDInterface ESP8266InterfaceTests ... more
For a complete getting started guide see the wiki...
Network Socket API
The Network Socket API provides a common interface for using sockets on network devices. The API provides a simple class-based interface that should be familiar to users experienced with other socket APIs. Additionally, the API provides a simple interface for implementing network devices, making it easy to connect hardware agnostic programs to new devices.
Network Interfaces
The NetworkInterface provides an abstract class for network devices that support sockets. Devices should provide a DeviceInterface class that inherits this interface and adds implementation specific methods for using the device. A NetworkInterface must be provided to a Socket constructor to open a socket on the interface. Currently two subclasses are defined for common devices, EthernetInterface
and WiFiInterface.
Sockets
The Socket class is used for managing network sockets. Once opened, the socket provides a pipe through which data can sent and recieved to a specific endpoint. The socket class can be instantiated as either a TCPSocket
or a UDPSocket
which defines the protocol used for the connection.
UDPSocket.h@125:ea3a618e0818, 2016-05-25 (annotated)
- Committer:
- dkato
- Date:
- Wed May 25 02:45:51 2016 +0000
- Revision:
- 125:ea3a618e0818
- Parent:
- 109:5d8bd5752386
Fix the path of DnsQuery.lib
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
Christopher Haster |
21:35ed15069189 | 1 | /* UDPSocket |
Christopher Haster |
21:35ed15069189 | 2 | * Copyright (c) 2015 ARM Limited |
Christopher Haster |
21:35ed15069189 | 3 | * |
Christopher Haster |
21:35ed15069189 | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
Christopher Haster |
21:35ed15069189 | 5 | * you may not use this file except in compliance with the License. |
Christopher Haster |
21:35ed15069189 | 6 | * You may obtain a copy of the License at |
Christopher Haster |
21:35ed15069189 | 7 | * |
Christopher Haster |
21:35ed15069189 | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
Christopher Haster |
21:35ed15069189 | 9 | * |
Christopher Haster |
21:35ed15069189 | 10 | * Unless required by applicable law or agreed to in writing, software |
Christopher Haster |
21:35ed15069189 | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
Christopher Haster |
21:35ed15069189 | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
Christopher Haster |
21:35ed15069189 | 13 | * See the License for the specific language governing permissions and |
Christopher Haster |
21:35ed15069189 | 14 | * limitations under the License. |
Christopher Haster |
21:35ed15069189 | 15 | */ |
Christopher Haster |
21:35ed15069189 | 16 | |
Christopher Haster |
72:6a8b52ee83ed | 17 | #ifndef UDPSOCKET_H |
Christopher Haster |
72:6a8b52ee83ed | 18 | #define UDPSOCKET_H |
Christopher Haster |
21:35ed15069189 | 19 | |
Christopher Haster |
25:ed7b2a52e8ac | 20 | #include "Socket.h" |
Christopher Haster |
105:2fd212f8da61 | 21 | #include "NetworkStack.h" |
Christopher Haster |
21:35ed15069189 | 22 | |
Christopher Haster |
103:37decbcb1108 | 23 | /** UDP socket |
Christopher Haster |
21:35ed15069189 | 24 | */ |
Christopher Haster |
72:6a8b52ee83ed | 25 | class UDPSocket : public Socket { |
Christopher Haster |
21:35ed15069189 | 26 | public: |
Christopher Haster |
103:37decbcb1108 | 27 | /** Create an uninitialized socket |
Christopher Haster |
103:37decbcb1108 | 28 | * |
Christopher Haster |
103:37decbcb1108 | 29 | * Must call open to initialize the socket on a network stack. |
Christopher Haster |
89:b1d417383c0d | 30 | */ |
Christopher Haster |
90:0a988e4abb72 | 31 | UDPSocket(); |
Christopher Haster |
103:37decbcb1108 | 32 | |
Christopher Haster |
103:37decbcb1108 | 33 | /** Create a socket on a network stack |
Christopher Haster |
103:37decbcb1108 | 34 | * |
Christopher Haster |
103:37decbcb1108 | 35 | * Creates and opens a socket on the specified network stack. |
Christopher Haster |
103:37decbcb1108 | 36 | * |
Christopher Haster |
103:37decbcb1108 | 37 | * @param iface Network stack as target for socket |
Christopher Haster |
103:37decbcb1108 | 38 | */ |
Christopher Haster |
105:2fd212f8da61 | 39 | UDPSocket(NetworkStack *iface); |
Christopher Haster |
90:0a988e4abb72 | 40 | |
Christopher Haster |
103:37decbcb1108 | 41 | /** Opens a socket |
Christopher Haster |
103:37decbcb1108 | 42 | * |
Christopher Haster |
103:37decbcb1108 | 43 | * Creates a network socket on the specified network stack. |
Christopher Haster |
103:37decbcb1108 | 44 | * Not needed if stack is passed to the socket's constructor. |
Christopher Haster |
103:37decbcb1108 | 45 | * |
Christopher Haster |
103:37decbcb1108 | 46 | * @param iface Network stack as target for socket |
Christopher Haster |
103:37decbcb1108 | 47 | * @return 0 on success, negative error code on failure |
Christopher Haster |
21:35ed15069189 | 48 | */ |
Christopher Haster |
105:2fd212f8da61 | 49 | virtual int open(NetworkStack *iface); |
Christopher Haster |
96:656011e49d9f | 50 | |
Christopher Haster |
103:37decbcb1108 | 51 | /** Send a packet over a UDP socket |
Christopher Haster |
103:37decbcb1108 | 52 | * |
Christopher Haster |
103:37decbcb1108 | 53 | * Sends data to the specified address specified by either a domain name |
Christopher Haster |
103:37decbcb1108 | 54 | * or an IP address and port. Returns the number of bytes sent from the |
Christopher Haster |
103:37decbcb1108 | 55 | * buffer. |
Christopher Haster |
103:37decbcb1108 | 56 | * |
Christopher Haster |
103:37decbcb1108 | 57 | * By default, sendto blocks until data is sent. If socket is set to |
Christopher Haster |
103:37decbcb1108 | 58 | * non-blocking or times out, NSAPI_ERROR_WOULD_BLOCK is returned |
Christopher Haster |
103:37decbcb1108 | 59 | * immediately. |
Christopher Haster |
103:37decbcb1108 | 60 | * |
Christopher Haster |
104:d28d8b508e7c | 61 | * @param host Hostname of the remote host |
Christopher Haster |
103:37decbcb1108 | 62 | * @param port Port of the remote host |
Christopher Haster |
103:37decbcb1108 | 63 | * @param data Buffer of data to send to the host |
Christopher Haster |
103:37decbcb1108 | 64 | * @param size Size of the buffer in bytes |
Christopher Haster |
103:37decbcb1108 | 65 | * @return Number of sent bytes on success, negative error |
Christopher Haster |
103:37decbcb1108 | 66 | * code on failure |
Christopher Haster |
96:656011e49d9f | 67 | */ |
Christopher Haster |
96:656011e49d9f | 68 | int sendto(const char *host, uint16_t port, const void *data, unsigned size); |
Christopher Haster |
96:656011e49d9f | 69 | |
Christopher Haster |
103:37decbcb1108 | 70 | /** Send a packet over a UDP socket |
Christopher Haster |
103:37decbcb1108 | 71 | * |
Christopher Haster |
103:37decbcb1108 | 72 | * Sends data to the specified address. Returns the number of bytes |
Christopher Haster |
103:37decbcb1108 | 73 | * sent from the buffer. |
Christopher Haster |
103:37decbcb1108 | 74 | * |
Christopher Haster |
103:37decbcb1108 | 75 | * By default, sendto blocks until data is sent. If socket is set to |
Christopher Haster |
103:37decbcb1108 | 76 | * non-blocking or times out, NSAPI_ERROR_WOULD_BLOCK is returned |
Christopher Haster |
103:37decbcb1108 | 77 | * immediately. |
Christopher Haster |
103:37decbcb1108 | 78 | * |
Christopher Haster |
103:37decbcb1108 | 79 | * @param address The SocketAddress of the remote host |
Christopher Haster |
103:37decbcb1108 | 80 | * @param data Buffer of data to send to the host |
Christopher Haster |
103:37decbcb1108 | 81 | * @param size Size of the buffer in bytes |
Christopher Haster |
103:37decbcb1108 | 82 | * @return Number of sent bytes on success, negative error |
Christopher Haster |
103:37decbcb1108 | 83 | * code on failure |
Christopher Haster |
89:b1d417383c0d | 84 | */ |
Christopher Haster |
80:9c6673c93082 | 85 | int sendto(const SocketAddress &address, const void *data, unsigned size); |
Christopher Haster |
75:dea0cdb42241 | 86 | |
Christopher Haster |
103:37decbcb1108 | 87 | /** Receive a packet over a UDP socket |
Christopher Haster |
103:37decbcb1108 | 88 | * |
Christopher Haster |
103:37decbcb1108 | 89 | * Receives data and stores the source address in address if address |
Christopher Haster |
103:37decbcb1108 | 90 | * is not NULL. Returns the number of bytes received into the buffer. |
Christopher Haster |
103:37decbcb1108 | 91 | * |
Christopher Haster |
103:37decbcb1108 | 92 | * By default, recvfrom blocks until data is sent. If socket is set to |
Christopher Haster |
103:37decbcb1108 | 93 | * non-blocking or times out, NSAPI_ERROR_WOULD_BLOCK is returned |
Christopher Haster |
103:37decbcb1108 | 94 | * immediately. |
Christopher Haster |
103:37decbcb1108 | 95 | * |
Christopher Haster |
103:37decbcb1108 | 96 | * @param address Destination for the source address or NULL |
Christopher Haster |
103:37decbcb1108 | 97 | * @param data Destination buffer for data received from the host |
Christopher Haster |
103:37decbcb1108 | 98 | * @param size Size of the buffer in bytes |
Christopher Haster |
103:37decbcb1108 | 99 | * @return Number of received bytes on success, negative error |
Christopher Haster |
103:37decbcb1108 | 100 | * code on failure |
Christopher Haster |
89:b1d417383c0d | 101 | */ |
Christopher Haster |
103:37decbcb1108 | 102 | int recvfrom(SocketAddress *address, void *data, unsigned size); |
Christopher Haster |
21:35ed15069189 | 103 | }; |
Christopher Haster |
21:35ed15069189 | 104 | |
Christopher Haster |
21:35ed15069189 | 105 | #endif |