File content as of revision 1:d8ca07afb3ec:

 /* Copyright (c) 2015 NXP Semiconductors. MIT License
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of this software
* and associated documentation files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use, copy, modify, merge, publish,
* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all copies or
* substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
#include "FXAS21002.h"
#include "FXOS8700.h"  
#include "MAG3110.h"  
#include "MMA8652.h" 
#include "MPL3115.h" 
#include "mbed.h"

// Initialize Serial port
Serial pc(USBTX, USBRX);

// Initialize pins for I2C communication for sensors. Set jumpers J6,J7 in FRDM-STBC-AGM01 board accordingly.
FXOS8700 accel(D14,D15);
FXOS8700 mag(D14,D15);
FXAS21002 gyro(D14,D15);
MAG3110 mag3110(D14,D15);
MMA8652 mma8652(D14,D15);
MPL3115 mpl3115(D14,D15);


    
int main()
{

// Configure Accelerometer FXOS8700, Magnetometer FXOS8700 & Gyroscope FXAS21002
    accel.accel_config();
    mag.mag_config();
    gyro.gyro_config();
    mag3110.MAG3110_config();
    mma8652.MMA8652_config();
    mpl3115.MPL3115_config();
 
    
    float accel_data[3]; float accel_rms=0.0;
    float mag_data[3];   float mag_rms=0.0;
    float gyro_data[3];  float gyro_rms=0.0;
    float alt_data[3];  float alt_rms=0.0;
       
    printf("Begin Data Acquisition....\r\n\r\n");
    wait(0.5);
    
    while(1)
    {
      accel.acquire_accel_data_g(accel_data);
      accel_rms = sqrt(((accel_data[0]*accel_data[0])+(accel_data[1]*accel_data[1])+(accel_data[2]*accel_data[2]))/3);
      printf("%4.2f,%4.2f,%4.2f,\t",accel_data[0],accel_data[1],accel_data[2]);
      wait(0.005);
      
     // mma8652.acquire_MMA8652_data_g(accel_data);
     // accel_rms = sqrt(((accel_data[0]*accel_data[0])+(accel_data[1]*accel_data[1])+(accel_data[2]*accel_data[2]))/3);
     // printf("%4.2f,%4.2f,%4.2f,\t",accel_data[0],accel_data[1],accel_data[2]);
     // wait(0.005);
      
     // mag.acquire_mag_data_uT(mag_data);
     // printf("%4.2f,\t%4.2f,\t%4.2f,\t",mag_data[0],mag_data[1],mag_data[2]);
     // mag_rms = sqrt(((mag_data[0]*mag_data[0])+(mag_data[1]*mag_data[1])+(mag_data[2]*mag_data[2]))/3);
     // wait(0.005);

      mag3110.acquire_MAG3110_data_uT(mag_data);
      printf("%f,%f,%f,\t",mag_data[0],mag_data[1],mag_data[2]);
      mag_rms = sqrt(((mag_data[0]*mag_data[0])+(mag_data[1]*mag_data[1])+(mag_data[2]*mag_data[2]))/3);
      wait(0.005);
      
      gyro.acquire_gyro_data_dps(gyro_data);
      printf("%4.2f,%4.2f,%4.2f,",gyro_data[0],gyro_data[1],gyro_data[2]);
      gyro_rms = sqrt(((gyro_data[0]*gyro_data[0])+(gyro_data[1]*gyro_data[1])+(gyro_data[2]*gyro_data[2]))/3);
      wait(0.005);
      
      mpl3115.acquire_MPL3115_data_Altitude_in_m(alt_data);
      printf("\t%f",alt_data[0]);
      alt_rms = sqrt(((alt_data[0]*alt_data[0])+(alt_data[1]*alt_data[1])+(alt_data[2]*alt_data[2]))/3);
      wait(0.005);
      
      printf("\n\r");
   
      
     }
      
}