Fork of libxDot-dev-mbed5-deprecated by MultiTech

The Connect example can be used as a starting point for an xDot application.

Change the libmDot-Custom library to libxDot-Custom after importing the above example.

Change the platform for the project to xDot in upper right corner of the compiler page.

Ensure the mbed-os version matches the with the library commit.

Currently the AT Firmware cannot be built online for the xDot.

Creating new channel plans

Copy EU868 or US915 custom channel plan as a starting point

EU868 provides a framework for a DYNAMIC channel plan with duty-cycle limitations

US915 provides a framework for a FIXED channel plan

RADIO_POWERS are measured output in dBm for each radio tx power setting.

Additional MAC Commands can be implemented by overriding the HandleMacCommand function.

Steps

1. Setup datarates, duty-cycle bands and channels in ChannelPlan_* constructor
2. Modify GetJoinDatarate and CalculateJoinBackoff to change join datarates and backoff
3. Customize HandleJoinAccept datarates
4. Use GetRxWindow(int) to define how the device open Rx window 1 and 2
5. GetNextChannel will pick a channel from the enabled channel at the current datarate before each TX

update mbed-os to 5.3.2; AS923 - add support for DL Channel and Tx Param Mac Commands; KR920 - add LBT;